summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--docs/config_options.md4
-rw-r--r--tmk_core/avr.mk14
2 files changed, 16 insertions, 2 deletions
diff --git a/docs/config_options.md b/docs/config_options.md
index 336feee8fd..a8a1064591 100644
--- a/docs/config_options.md
+++ b/docs/config_options.md
@@ -208,9 +208,13 @@ There are a few different ways to set handedness for split keyboards (listed in
1. Set `SPLIT_HAND_PIN`: Reads a pin to determine handedness. If pin is high, it's the left side, if low, the half is determined to be the right side
2. Set `EE_HANDS` and flash `eeprom-lefthand.eep`/`eeprom-righthand.eep` to each half
+ * For boards with DFU bootloader you can use `:dfu-split-left`/`:dfu-split-right` to flash these EEPROM files
+ * For boards with Caterina bootloader (like stock Pro Micros), use `:avrdude-split-left`/`:avrdude-split-right`
3. Set `MASTER_RIGHT`: Half that is plugged into the USB port is determined to be the master and right half (inverse of the default)
4. Default: The side that is plugged into the USB port is the master half and is assumed to be the left half. The slave side is the right half
+#### Defines for handedness
+
* `#define SPLIT_HAND_PIN B7`
* For using high/low pin to determine handedness, low = right hand, high = left hand. Replace `B7` with the pin you are using. This is optional, and if you leave `SPLIT_HAND_PIN` undefined, then you can still use the EE_HANDS method or MASTER_LEFT / MASTER_RIGHT defines like the stock Let's Split uses.
diff --git a/tmk_core/avr.mk b/tmk_core/avr.mk
index 79fdf4de53..bf3e269fdf 100644
--- a/tmk_core/avr.mk
+++ b/tmk_core/avr.mk
@@ -223,7 +223,11 @@ define EXEC_AVRDUDE
printf "Waiting for $$USB to become writable."; \
while [ ! -w "$$USB" ]; do sleep 0.5; printf "."; done; echo ""; \
fi; \
- avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex; \
+ if [ -z "$(1)" ]; then \
+ avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex; \
+ else \
+ avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex -U eeprom:w:$(QUANTUM_PATH)/split_common/$(1); \
+ fi \
fi
endef
@@ -232,9 +236,15 @@ avrdude: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware
avrdude-loop: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware
while true; do \
- $(call EXEC_AVRDUDE) ; \
+ $(call EXEC_AVRDUDE) ; \
done
+avrdude-split-left: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware
+ $(call EXEC_AVRDUDE,eeprom-lefthand.eep)
+
+avrdude-split-right: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware
+ $(call EXEC_AVRDUDE,eeprom-righthand.eep)
+
# Convert hex to bin.
bin: $(BUILD_DIR)/$(TARGET).hex
$(OBJCOPY) -Iihex -Obinary $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).bin