summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/usb2422.c (renamed from tmk_core/protocol/arm_atsam/usb/usb2422.h)216
-rw-r--r--drivers/usb2422.h59
-rw-r--r--keyboards/massdrop/alt/alt.h2
-rw-r--r--keyboards/massdrop/alt/config.h9
-rw-r--r--keyboards/massdrop/ctrl/config.h9
-rw-r--r--keyboards/massdrop/ctrl/ctrl.h2
-rw-r--r--tmk_core/protocol/arm_atsam.mk4
-rw-r--r--tmk_core/protocol/arm_atsam/arm_atsam_protocol.h2
-rw-r--r--tmk_core/protocol/arm_atsam/i2c_master.c19
-rw-r--r--tmk_core/protocol/arm_atsam/i2c_master.h9
-rw-r--r--tmk_core/protocol/arm_atsam/main_arm_atsam.c4
-rw-r--r--tmk_core/protocol/arm_atsam/usb/usb_hub.c (renamed from tmk_core/protocol/arm_atsam/usb/usb2422.c)98
-rw-r--r--tmk_core/protocol/arm_atsam/usb/usb_hub.h51
13 files changed, 278 insertions, 206 deletions
diff --git a/tmk_core/protocol/arm_atsam/usb/usb2422.h b/drivers/usb2422.c
index b4830b5bc8..62b919093b 100644
--- a/tmk_core/protocol/arm_atsam/usb/usb2422.h
+++ b/drivers/usb2422.c
@@ -1,32 +1,25 @@
-/*
-Copyright 2018 Massdrop Inc.
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef _USB2422_H_
-#define _USB2422_H_
-
-#define REV_USB2422 0x100
-
-#define USB2422_ADDR 0x58 // I2C device address, one instance
-
-#define USB2422_HUB_ACTIVE_GROUP 0 // PA
-#define USB2422_HUB_ACTIVE_PIN 18 // 18
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <string.h>
+#include "usb2422.h"
+#include "i2c_master.h"
+#include "wait.h"
+#include "gpio.h"
/* -------- USB2422_VID : (USB2422L Offset: 0x00) (R/W 16) Vendor ID -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint16_t VID_LSB : 8;
@@ -34,10 +27,8 @@ typedef union {
} bit; /*!< Structure used for bit access */
uint16_t reg; /*!< Type used for register access */
} USB2422_VID_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- USB2422_PID : (USB2422L Offset: 0x02) (R/W 16) Product ID -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint16_t PID_LSB : 8;
@@ -45,10 +36,8 @@ typedef union {
} bit; /*!< Structure used for bit access */
uint16_t reg; /*!< Type used for register access */
} USB2422_PID_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- USB2422_DID : (USB2422L Offset: 0x04) (R/W 16) Device ID -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint16_t DID_LSB : 8;
@@ -56,10 +45,8 @@ typedef union {
} bit; /*!< Structure used for bit access */
uint16_t reg; /*!< Type used for register access */
} USB2422_DID_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- USB2422_CFG1 : (USB2422L Offset: 0x06) (R/W 8) Configuration Data Byte 1-------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t PORT_PWR : 1;
@@ -72,10 +59,8 @@ typedef union {
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB2422_CFG1_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- USB2422_CFG2 : (USB2422L Offset: 0x07) (R/W 8) Configuration Data Byte 2-------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t : 3;
@@ -86,10 +71,8 @@ typedef union {
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB2422_CFG2_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- USB2422_CFG3 : (USB2422L Offset: 0x08) (R/W 16) Configuration Data Byte 3-------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t STRING_EN : 1;
@@ -99,10 +82,8 @@ typedef union {
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB2422_CFG3_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- USB2422_NRD : (USB2422L Offset: 0x09) (R/W 8) Non Removable Device -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t : 5;
@@ -112,10 +93,8 @@ typedef union {
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB2422_NRD_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- USB2422_PDS : (USB2422L Offset: 0x0A) (R/W 8) Port Diable for Self-Powered Operation -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t : 1;
@@ -125,10 +104,9 @@ typedef union {
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB2422_PDS_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- USB2422_PDB : (USB2422L Offset: 0x0B) (R/W 8) Port Diable for Bus-Powered Operation -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+
typedef union {
struct {
uint8_t : 1;
@@ -138,125 +116,98 @@ typedef union {
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB2422_PDB_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- USB2422_MAXPS : (USB2422L Offset: 0x0C) (R/W 8) Max Power for Self-Powered Operation -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t MAX_PWR_SP : 8;
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB2422_MAXPS_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- USB2422_MAXPB : (USB2422L Offset: 0x0D) (R/W 8) Max Power for Bus-Powered Operation -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t MAX_PWR_BP : 8;
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB2422_MAXPB_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- USB2422_HCMCS : (USB2422L Offset: 0x0E) (R/W 8) Hub Controller Max Current for Self-Powered Operation -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t HC_MAX_C_SP : 8;
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB2422_HCMCS_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- USB2422_HCMCB : (USB2422L Offset: 0x0F) (R/W 8) Hub Controller Max Current for Bus-Powered Operation -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t HC_MAX_C_BP : 8;
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB2422_HCMCB_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- USB2422_PWRT : (USB2422L Offset: 0x10) (R/W 8) Power On Time -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t POWER_ON_TIME : 8;
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB2422_PWRT_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- USB2422_LANGID LSB : (USB2422L Offset: 0x11) (R/W 16) Language ID -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t LANGID_LSB : 8;
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB2422_LANGID_LSB_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- USB2422_LANGID MSB : (USB2422L Offset: 0x12) (R/W 16) Language ID -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t LANGID_MSB : 8;
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB2422_LANGID_MSB_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- USB2422_MFRSL : (USB2422L Offset: 0x13) (R/W 8) Manufacturer String Length -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t MFR_STR_LEN : 8;
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB2422_MFRSL_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- USB2422_PRDSL : (USB2422L Offset: 0x14) (R/W 8) Product String Length -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t PRD_STR_LEN : 8;
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB2422_PRDSL_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- USB2422_SERSL : (USB2422L Offset: 0x15) (R/W 8) Serial String Length -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t SER_STR_LEN : 8;
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB2422_SERSL_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- USB2422_MFRSTR : (USB2422L Offset: 0x16-53) (R/W 8) Maufacturer String -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef uint16_t USB2422_MFRSTR_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- USB2422_PRDSTR : (USB2422L Offset: 0x54-91) (R/W 8) Product String -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef uint16_t USB2422_PRDSTR_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- USB2422_SERSTR : (USB2422L Offset: 0x92-CF) (R/W 8) Serial String -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef uint16_t USB2422_SERSTR_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- USB2422_BCEN : (USB2422L Offset: 0xD0) (R/W 8) Battery Charging Enable -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+
typedef union {
struct {
uint8_t : 1;
@@ -266,10 +217,8 @@ typedef union {
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB2422_BCEN_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- USB2422_BOOSTUP : (USB2422L Offset: 0xF6) (R/W 8) Boost Upstream -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t BOOST : 2;
@@ -277,10 +226,8 @@ typedef union {
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB2422_BOOSTUP_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- USB2422_BOOSTDOWN : (USB2422L Offset: 0xF8) (R/W 8) Boost Downstream -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t BOOST1 : 2;
@@ -289,10 +236,8 @@ typedef union {
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB2422_BOOSTDOWN_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- USB2422_PRTSP : (USB2422L Offset: 0xFA) (R/W 8) Port Swap -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t : 1;
@@ -302,10 +247,8 @@ typedef union {
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB2422_PRTSP_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- USB2422_PRTR12 : (USB2422L Offset: 0xFB) (R/W 8) Port 1/2 Remap -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t PORT1_REMAP : 4;
@@ -313,7 +256,7 @@ typedef union {
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB2422_PRTR12_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
#define USB2422_PRTR12_DISABLE 0
#define USB2422_PRT12_P2TOL1 1
#define USB2422_PRT12_P2XTOL2 2
@@ -321,7 +264,6 @@ typedef union {
#define USB2422_PRT12_P1XTOL2 2
/* -------- USB2422_STCD : (USB2422L Offset: 0xFF) (R/W 8) Status Command -------- */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t USB_ATTACH : 1;
@@ -331,10 +273,8 @@ typedef union {
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB2422_STCD_Type;
-#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/** \brief USB2422 device hardware registers */
-#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef struct {
USB2422_VID_Type VID; /**< \brief Offset: 0x00*/
USB2422_PID_Type PID; /**< \brief Offset: 0x02*/
@@ -368,35 +308,95 @@ typedef struct {
USB2422_PRTR12_Type PRTR12; /**< \brief Offset: 0xFB*/
uint8_t Reserved4[0x3];
USB2422_STCD_Type STCD; /**< \brief Offset: 0xFF*/
-} Usb2422;
-#endif
+} Usb2422_t;
+
+// ***************************************************************
+
+static Usb2422_t config;
-#define PORT_DETECT_RETRY_INTERVAL 2000
+// ***************************************************************
-#define USB_EXTRA_ADC_THRESHOLD 900
+/** \brief Handle the conversion to allow simple strings
+ */
+static void USB2422_strcpy(const char* str, USB2422_MFRSTR_Type* dest, uint8_t len) {
+ for (uint8_t i = 0; i < len; i++) {
+ dest[i] = str[i];
+ }
+}
-#define USB_EXTRA_STATE_DISABLED 0
-#define USB_EXTRA_STATE_ENABLED 1
-#define USB_EXTRA_STATE_UNKNOWN 2
-#define USB_EXTRA_STATE_DISABLED_UNTIL_REPLUG 3
+/** \brief Handle the conversion to allow simple strings
+ */
+static void USB2422_write_block(void) {
+ static unsigned char i2c0_buf[34];
-#define USB_HOST_PORT_1 0
-#define USB_HOST_PORT_2 1
-#define USB_HOST_PORT_UNKNOWN 2
+ unsigned char* dest = i2c0_buf;
+ unsigned char* src;
+ unsigned char* base = (unsigned char*)&config;
-extern uint8_t usb_host_port;
-extern uint8_t usb_extra_state;
-extern uint8_t usb_extra_manual;
-extern uint8_t usb_gcr_auto;
+ for (src = base; src < base + 256; src += 32) {
+ dest[0] = src - base;
+ dest[1] = 32;
+ memcpy(&dest[2], src, 32);
+ i2c_transmit(USB2422_ADDRESS, dest, 34, 50000);
+ wait_us(100);
+ }
+}
-void USB2422_init(void);
-void USB_reset(void);
-void USB_configure(void);
-uint16_t USB_active(void);
-void USB_set_host_by_voltage(void);
-uint16_t adc_get(uint8_t muxpos);
-uint8_t USB2422_Port_Detect_Init(void);
-void USB_HandleExtraDevice(void);
-void USB_ExtraSetState(uint8_t state);
+// ***************************************************************
-#endif //_USB2422_H_
+void USB2422_init() {
+#ifdef USB2422_RESET_PIN
+ setPinOutput(USB2422_RESET_PIN);
+#endif
+#ifdef USB2422_ACTIVE_PIN
+ setPinInput(USB2422_ACTIVE_PIN);
+#endif
+
+ i2c_init(); // IC2 clk must be high at USB2422 reset release time to signal SMB configuration
+}
+
+void USB2422_configure() {
+ static const char SERNAME[] = "Unavailable";
+
+ memset(&config, 0, sizeof(Usb2422_t));
+
+ // configure Usb2422 registers
+ config.VID.reg = USB2422_VENDOR_ID;
+ config.PID.reg = USB2422_PRODUCT_ID;
+ config.DID.reg = USB2422_DEVICE_VER; // BCD format, eg 01.01
+ config.CFG1.bit.SELF_BUS_PWR = 1; // self powered for now
+ config.CFG1.bit.HS_DISABLE = 1; // full or high speed
+ // config.CFG2.bit.COMPOUND = 0; // compound device
+ config.CFG3.bit.STRING_EN = 1; // strings enabled
+ // config.NRD.bit.PORT2_NR = 0; // MCU is non-removable
+ config.MAXPB.reg = 20; // 0mA
+ config.HCMCB.reg = 20; // 0mA
+ config.MFRSL.reg = sizeof(USB2422_MANUFACTURER);
+ config.PRDSL.reg = sizeof(USB2422_PRODUCT);
+ config.SERSL.reg = sizeof(SERNAME);
+ USB2422_strcpy(USB2422_MANUFACTURER, config.MFRSTR, sizeof(USB2422_MANUFACTURER));
+ USB2422_strcpy(USB2422_PRODUCT, config.PRDSTR, sizeof(USB2422_PRODUCT));
+ USB2422_strcpy(SERNAME, config.SERSTR, sizeof(SERNAME));
+ // config.BOOSTUP.bit.BOOST=3; //upstream port
+ // config.BOOSTDOWN.bit.BOOST1=0; // extra port
+ // config.BOOSTDOWN.bit.BOOST2=2; //MCU is close
+ config.STCD.bit.USB_ATTACH = 1;
+
+ USB2422_write_block();
+}
+
+void USB2422_reset() {
+#ifdef USB2422_RESET_PIN
+ writePinLow(USB2422_RESET_PIN);
+ wait_us(2);
+ writePinHigh(USB2422_RESET_PIN);
+#endif
+}
+
+bool USB2422_active() {
+#ifdef USB2422_ACTIVE_PIN
+ return readPin(USB2422_ACTIVE_PIN);
+#else
+ return 1;
+#endif
+}
diff --git a/drivers/usb2422.h b/drivers/usb2422.h
new file mode 100644
index 0000000000..2e435b02bc
--- /dev/null
+++ b/drivers/usb2422.h
@@ -0,0 +1,59 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include <stdbool.h>
+
+#ifndef USB2422_ADDRESS
+# define USB2422_ADDRESS 0x58
+#endif
+
+#ifndef USB2422_VENDOR_ID
+# define USB2422_VENDOR_ID 0xFEED
+#endif
+#ifndef USB2422_PRODUCT_ID
+# define USB2422_PRODUCT_ID 0x0001
+#endif
+#ifndef USB2422_DEVICE_VER
+# define USB2422_DEVICE_VER 0x0001
+#endif
+
+#ifndef USB2422_MANUFACTURER
+# define USB2422_MANUFACTURER "QMK"
+#endif
+#ifndef USB2422_PRODUCT
+# define USB2422_PRODUCT "QMK Hub"
+#endif
+
+/** \brief Initialises the dependent subsystems */
+void USB2422_init(void);
+
+/** \brief Push configuration to the USB2422 device */
+void USB2422_configure(void);
+
+/** \brief Reset the chip (RESET_N)
+ *
+ * NOTE:
+ * Depends on a valid USB2422_RESET_PIN configuration
+ */
+void USB2422_reset(void);
+
+/** \brief Indicates the USB state of the hub (SUSP_IND)
+ *
+ * NOTE:
+ * Depends on a valid USB2422_ACTIVE_PIN configuration
+ */
+bool USB2422_active(void);
diff --git a/keyboards/massdrop/alt/alt.h b/keyboards/massdrop/alt/alt.h
index 0396095450..c3761bee8b 100644
--- a/keyboards/massdrop/alt/alt.h
+++ b/keyboards/massdrop/alt/alt.h
@@ -7,7 +7,7 @@
#include "i2c_master.h"
#include "md_rgb_matrix.h" //For led keycodes
#include "usb/udi_cdc.h"
-#include "usb/usb2422.h"
+#include "usb/usb_hub.h"
#define LAYOUT_65_ansi_blocker( \
K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, K14, K15, \
diff --git a/keyboards/massdrop/alt/config.h b/keyboards/massdrop/alt/config.h
index 085e1aebba..c37949a74b 100644
--- a/keyboards/massdrop/alt/config.h
+++ b/keyboards/massdrop/alt/config.h
@@ -90,6 +90,15 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define DEBUG_BOOT_TRACING_PORT PB
#define DEBUG_BOOT_TRACING_PIN 23
+/* USB2422 config */
+#define USB2422_ADDRESS 0x58
+#define USB2422_VENDOR_ID 0x04D8
+#define USB2422_PRODUCT_ID 0xEEC5
+#define USB2422_DEVICE_VER 0x0101
+#define USB2422_MANUFACTURER "Massdrop Inc."
+#define USB2422_PRODUCT "Massdrop Hub"
+#define USB2422_ACTIVE_PIN A18
+
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
diff --git a/keyboards/massdrop/ctrl/config.h b/keyboards/massdrop/ctrl/config.h
index aefb900448..fe8b600234 100644
--- a/keyboards/massdrop/ctrl/config.h
+++ b/keyboards/massdrop/ctrl/config.h
@@ -89,6 +89,15 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define DEBUG_BOOT_TRACING_PORT PB
#define DEBUG_BOOT_TRACING_PIN 23
+/* USB2422 config */
+#define USB2422_ADDRESS 0x58
+#define USB2422_VENDOR_ID 0x04D8
+#define USB2422_PRODUCT_ID 0xEEC5
+#define USB2422_DEVICE_VER 0x0101
+#define USB2422_MANUFACTURER "Massdrop Inc."
+#define USB2422_PRODUCT "Massdrop Hub"
+#define USB2422_ACTIVE_PIN A18
+
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
diff --git a/keyboards/massdrop/ctrl/ctrl.h b/keyboards/massdrop/ctrl/ctrl.h
index 1650beb9a4..a3d66ba775 100644
--- a/keyboards/massdrop/ctrl/ctrl.h
+++ b/keyboards/massdrop/ctrl/ctrl.h
@@ -7,7 +7,7 @@
#include "i2c_master.h"
#include "md_rgb_matrix.h" //For led keycodes
#include "usb/udi_cdc.h"
-#include "usb/usb2422.h"
+#include "usb/usb_hub.h"
#define LAYOUT( \
K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, K14, K15, \
diff --git a/tmk_core/protocol/arm_atsam.mk b/tmk_core/protocol/arm_atsam.mk
index e3b5505966..ffd1fa9f50 100644
--- a/tmk_core/protocol/arm_atsam.mk
+++ b/tmk_core/protocol/arm_atsam.mk
@@ -20,10 +20,12 @@ SRC += $(ARM_ATSAM_DIR)/usb/udi_hid.c
SRC += $(ARM_ATSAM_DIR)/usb/udi_hid_kbd.c
SRC += $(ARM_ATSAM_DIR)/usb/udi_hid_kbd_desc.c
SRC += $(ARM_ATSAM_DIR)/usb/ui.c
-SRC += $(ARM_ATSAM_DIR)/usb/usb2422.c
SRC += $(ARM_ATSAM_DIR)/usb/usb.c
SRC += $(ARM_ATSAM_DIR)/usb/usb_device_udd.c
+SRC += $(ARM_ATSAM_DIR)/usb/usb_hub.c
SRC += $(ARM_ATSAM_DIR)/usb/usb_util.c
+SRC += $(DRIVER_PATH)/usb2422.c
+
# Search Path
VPATH += $(TMK_DIR)/$(ARM_ATSAM_DIR)
diff --git a/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h b/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h
index c3eab39fb1..e1749f872d 100644
--- a/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h
+++ b/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h
@@ -29,7 +29,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "i2c_master.h"
#include "shift_register.h"
-#include "./usb/usb2422.h"
+#include "./usb/usb_hub.h"
#ifndef MD_BOOTLOADER
diff --git a/tmk_core/protocol/arm_atsam/i2c_master.c b/tmk_core/protocol/arm_atsam/i2c_master.c
index dda2f85b00..af046625f4 100644
--- a/tmk_core/protocol/arm_atsam/i2c_master.c
+++ b/tmk_core/protocol/arm_atsam/i2c_master.c
@@ -564,4 +564,23 @@ uint8_t i2c_led_q_run(void) {
return 1;
}
+
+__attribute__((weak)) void i2c_init(void) {
+ static bool is_initialised = false;
+ if (!is_initialised) {
+ is_initialised = true;
+
+ i2c0_init();
+ }
+}
+
+i2c_status_t i2c_transmit(uint8_t address, const uint8_t *data, uint16_t length, uint16_t timeout) {
+ uint8_t ret = i2c0_transmit(address, (uint8_t *)data, length, timeout);
+ SERCOM0->I2CM.CTRLB.bit.CMD = 0x03;
+ while (SERCOM0->I2CM.SYNCBUSY.bit.SYSOP) {
+ DBGC(DC_USB_WRITE2422_BLOCK_SYNC_SYSOP);
+ }
+ return ret ? I2C_STATUS_SUCCESS : I2C_STATUS_ERROR;
+}
+
#endif // !defined(MD_BOOTLOADER) && defined(RGB_MATRIX_ENABLE)
diff --git a/tmk_core/protocol/arm_atsam/i2c_master.h b/tmk_core/protocol/arm_atsam/i2c_master.h
index 68773f213f..e11235d447 100644
--- a/tmk_core/protocol/arm_atsam/i2c_master.h
+++ b/tmk_core/protocol/arm_atsam/i2c_master.h
@@ -101,4 +101,13 @@ void i2c0_init(void);
uint8_t i2c0_transmit(uint8_t address, uint8_t *data, uint16_t length, uint16_t timeout);
void i2c0_stop(void);
+// Terrible interface compatiblity...
+#define I2C_STATUS_SUCCESS (0)
+#define I2C_STATUS_ERROR (-1)
+
+typedef int16_t i2c_status_t;
+
+void i2c_init(void);
+i2c_status_t i2c_transmit(uint8_t address, const uint8_t *data, uint16_t length, uint16_t timeout);
+
#endif // _I2C_MASTER_H_
diff --git a/tmk_core/protocol/arm_atsam/main_arm_atsam.c b/tmk_core/protocol/arm_atsam/main_arm_atsam.c
index 858b4cd9fc..1df5112ed8 100644
--- a/tmk_core/protocol/arm_atsam/main_arm_atsam.c
+++ b/tmk_core/protocol/arm_atsam/main_arm_atsam.c
@@ -296,7 +296,7 @@ int main(void) {
matrix_init();
- USB2422_init();
+ USB_Hub_init();
DBGC(DC_MAIN_UDC_START_BEGIN);
udc_start();
@@ -306,7 +306,7 @@ int main(void) {
CDC_init();
DBGC(DC_MAIN_CDC_INIT_COMPLETE);
- while (USB2422_Port_Detect_Init() == 0) {
+ while (USB_Hub_Port_Detect_Init() == 0) {
}
DBG_LED_OFF;
diff --git a/tmk_core/protocol/arm_atsam/usb/usb2422.c b/tmk_core/protocol/arm_atsam/usb/usb_hub.c
index a878cb6b7c..c5fd284aab 100644
--- a/tmk_core/protocol/arm_atsam/usb/usb2422.c
+++ b/tmk_core/protocol/arm_atsam/usb/usb_hub.c
@@ -16,25 +16,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "arm_atsam_protocol.h"
+#include "drivers/usb2422.h"
#include <string.h>
-Usb2422 USB2422_shadow;
-unsigned char i2c0_buf[34];
-
-const uint16_t MFRNAME[] = {'M', 'a', 's', 's', 'd', 'r', 'o', 'p', ' ', 'I', 'n', 'c', '.'}; // Massdrop Inc.
-const uint16_t PRDNAME[] = {'M', 'a', 's', 's', 'd', 'r', 'o', 'p', ' ', 'H', 'u', 'b'}; // Massdrop Hub
-#ifndef MD_BOOTLOADER
-// Serial number reported stops before first found space character or at last found character
-const uint16_t SERNAME[] = {'U', 'n', 'a', 'v', 'a', 'i', 'l', 'a', 'b', 'l', 'e'}; // Unavailable
-#else
-// In production, this field is found, modified, and offset noted as the last 32-bit word in the bootloader space
-// The offset allows the application to use the factory programmed serial (which may differ from the physical serial label)
-// Serial number reported stops before first found space character or when max size is reached
-__attribute__((__aligned__(4))) const uint16_t SERNAME[BOOTLOADER_SERIAL_MAX_SIZE] = {'M', 'D', 'H', 'U', 'B', 'B', 'O', 'O', 'T', 'L', '0', '0', '0', '0', '0', '0', '0', '0', '0', '0'};
-// NOTE: Serial replacer will not write a string longer than given here as a precaution, so give enough
-// space as needed and adjust BOOTLOADER_SERIAL_MAX_SIZE to match amount given
-#endif // MD_BOOTLOADER
-
uint8_t usb_host_port;
#ifndef MD_BOOTLOADER
@@ -47,29 +31,7 @@ uint8_t usb_gcr_auto;
uint16_t adc_extra;
-void USB_write2422_block(void) {
- unsigned char *dest = i2c0_buf;
- unsigned char *src;
- unsigned char *base = (unsigned char *)&USB2422_shadow;
-
- DBGC(DC_USB_WRITE2422_BLOCK_BEGIN);
-
- for (src = base; src < base + 256; src += 32) {
- dest[0] = src - base;
- dest[1] = 32;
- memcpy(&dest[2], src, 32);
- i2c0_transmit(USB2422_ADDR, dest, 34, 50000);
- SERCOM0->I2CM.CTRLB.bit.CMD = 0x03;
- while (SERCOM0->I2CM.SYNCBUSY.bit.SYSOP) {
- DBGC(DC_USB_WRITE2422_BLOCK_SYNC_SYSOP);
- }
- wait_us(100);
- }
-
- DBGC(DC_USB_WRITE2422_BLOCK_COMPLETE);
-}
-
-void USB2422_init(void) {
+void USB_Hub_init(void) {
Gclk * pgclk = GCLK;
Mclk * pmclk = MCLK;
Port * pport = PORT;
@@ -147,9 +109,7 @@ void USB2422_init(void) {
pusb->DEVICE.QOSCTRL.bit.DQOS = 2;
pusb->DEVICE.QOSCTRL.bit.CQOS = 2;
- pport->Group[USB2422_HUB_ACTIVE_GROUP].PINCFG[USB2422_HUB_ACTIVE_PIN].bit.INEN = 1;
-
- i2c0_init(); // IC2 clk must be high at USB2422 reset release time to signal SMB configuration
+ USB2422_init();
sr_exp_data.bit.HUB_CONNECT = 1; // connect signal
sr_exp_data.bit.HUB_RESET_N = 1; // reset high
@@ -181,62 +141,16 @@ void USB_reset(void) {
}
void USB_configure(void) {
- Usb2422 *pusb2422 = &USB2422_shadow;
- memset(pusb2422, 0, sizeof(Usb2422));
-
- uint16_t *serial_use = (uint16_t *)SERNAME; // Default to use SERNAME from this file
- uint8_t serial_length = sizeof(SERNAME) / sizeof(uint16_t); // Default to use SERNAME from this file
-#ifndef MD_BOOTLOADER
- uint32_t serial_ptrloc = (uint32_t)&_srom - 4;
-#else // MD_BOOTLOADER
- uint32_t serial_ptrloc = (uint32_t)&_erom - 4;
-#endif // MD_BOOTLOADER
- uint32_t serial_address = *(uint32_t *)serial_ptrloc; // Address of bootloader's serial number if available
-
DBGC(DC_USB_CONFIGURE_BEGIN);
- if (serial_address != 0xFFFFFFFF && serial_address < serial_ptrloc) // Check for factory programmed serial address
- {
- if ((serial_address & 0xFF) % 4 == 0) // Check alignment
- {
- serial_use = (uint16_t *)(serial_address);
- serial_length = 0;
- while ((*(serial_use + serial_length) > 32 && *(serial_use + serial_length) < 127) && serial_length < BOOTLOADER_SERIAL_MAX_SIZE) {
- serial_length++;
- DBGC(DC_USB_CONFIGURE_GET_SERIAL);
- }
- }
- }
-
- // configure Usb2422 registers
- pusb2422->VID.reg = 0x04D8; // from Microchip 4/19/2018
- pusb2422->PID.reg = 0xEEC5; // from Microchip 4/19/2018 = Massdrop, Inc. USB Hub
- pusb2422->DID.reg = 0x0101; // BCD 01.01
- pusb2422->CFG1.bit.SELF_BUS_PWR = 1; // self powered for now
- pusb2422->CFG1.bit.HS_DISABLE = 1; // full or high speed
- // pusb2422->CFG2.bit.COMPOUND = 0; // compound device
- pusb2422->CFG3.bit.STRING_EN = 1; // strings enabled
- // pusb2422->NRD.bit.PORT2_NR = 0; // MCU is non-removable
- pusb2422->MAXPB.reg = 20; // 0mA
- pusb2422->HCMCB.reg = 20; // 0mA
- pusb2422->MFRSL.reg = sizeof(MFRNAME) / sizeof(uint16_t);
- pusb2422->PRDSL.reg = sizeof(PRDNAME) / sizeof(uint16_t);
- pusb2422->SERSL.reg = serial_length;
- memcpy(pusb2422->MFRSTR, MFRNAME, sizeof(MFRNAME));
- memcpy(pusb2422->PRDSTR, PRDNAME, sizeof(PRDNAME));
- memcpy(pusb2422->SERSTR, serial_use, serial_length * sizeof(uint16_t));
- // pusb2422->BOOSTUP.bit.BOOST=3; //upstream port
- // pusb2422->BOOSTDOWN.bit.BOOST1=0; // extra port
- // pusb2422->BOOSTDOWN.bit.BOOST2=2; //MCU is close
- pusb2422->STCD.bit.USB_ATTACH = 1;
- USB_write2422_block();
+ USB2422_configure();
adc_extra = 0;
DBGC(DC_USB_CONFIGURE_COMPLETE);
}
-uint16_t USB_active(void) { return (PORT->Group[USB2422_HUB_ACTIVE_GROUP].IN.reg & (1 << USB2422_HUB_ACTIVE_PIN)) != 0; }
+uint16_t USB_active(void) { return USB2422_active(); }
void USB_set_host_by_voltage(void) {
// UP is upstream device (HOST)
@@ -314,7 +228,7 @@ void USB_set_host_by_voltage(void) {
DBGC(DC_USB_SET_HOST_BY_VOLTAGE_COMPLETE);
}
-uint8_t USB2422_Port_Detect_Init(void) {
+uint8_t USB_Hub_Port_Detect_Init(void) {
uint32_t port_detect_retry_ms;
uint32_t tmod;
diff --git a/tmk_core/protocol/arm_atsam/usb/usb_hub.h b/tmk_core/protocol/arm_atsam/usb/usb_hub.h
new file mode 100644
index 0000000000..76b1e0a326
--- /dev/null
+++ b/tmk_core/protocol/arm_atsam/usb/usb_hub.h
@@ -0,0 +1,51 @@
+/*
+Copyright 2018 Massdrop Inc.
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _USB2422_H_
+#define _USB2422_H_
+
+#define REV_USB2422 0x100
+
+#define PORT_DETECT_RETRY_INTERVAL 2000
+
+#define USB_EXTRA_ADC_THRESHOLD 900
+
+#define USB_EXTRA_STATE_DISABLED 0
+#define USB_EXTRA_STATE_ENABLED 1
+#define USB_EXTRA_STATE_UNKNOWN 2
+#define USB_EXTRA_STATE_DISABLED_UNTIL_REPLUG 3
+
+#define USB_HOST_PORT_1 0
+#define USB_HOST_PORT_2 1
+#define USB_HOST_PORT_UNKNOWN 2
+
+extern uint8_t usb_host_port;
+extern uint8_t usb_extra_state;
+extern uint8_t usb_extra_manual;
+extern uint8_t usb_gcr_auto;
+
+void USB_Hub_init(void);
+uint8_t USB_Hub_Port_Detect_Init(void);
+void USB_reset(void);
+void USB_configure(void);
+uint16_t USB_active(void);
+void USB_set_host_by_voltage(void);
+uint16_t adc_get(uint8_t muxpos);
+void USB_HandleExtraDevice(void);
+void USB_ExtraSetState(uint8_t state);
+
+#endif //_USB2422_H_