Adding "Eagle Viper Rep", open sourced Eagle/Viper V2/V3 PCB (#13020)

* adding revision A

* Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.h

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Update readme.md

Adding instruction on how to enter bootloader

* adding instruction on how to enter bootloader (DFU)

adding instruction on how to enter bootloader (DFU)

* updated description

* Update keyboards/4pplet/eagle_viper_rep/rev_a/halconf.h

Co-authored-by: Nick Brassel <nick@tzarc.org>

* Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c

Co-authored-by: Nick Brassel <nick@tzarc.org>

* Update keyboards/4pplet/eagle_viper_rep/rev_a/config.h

Co-authored-by: Nick Brassel <nick@tzarc.org>

* Update keyboards/4pplet/eagle_viper_rep/rev_a/chconf.h

Co-authored-by: Nick Brassel <nick@tzarc.org>

* Update keyboards/4pplet/eagle_viper_rep/rev_a/chconf.h

Co-authored-by: Nick Brassel <nick@tzarc.org>

* Update keyboards/4pplet/eagle_viper_rep/keymaps/default/keymap.c

Co-authored-by: Nick Brassel <nick@tzarc.org>

* Restoring palSetLineMode for working underglow

I was experiencing the same issue as this: https://github.com/qmk/qmk_firmware/issues/12655#issuecomment-844104659

sigprof helped me resolve this issue.

* Update rev_a.c

removing palSetLineMode again, works great after rebase. Thanks!

Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>

8 files changed, 345 insertions, 0 deletions

diff --git a/keyboards/4pplet/eagle_viper_rep/rev_a/chconf.h b/keyboards/4pplet/eagle_viper_rep/rev_a/chconf.h
new file mode 100644
index 0000000000..9e81d8c4a0
--- /dev/null
+++ b/keyboards/4pplet/eagle_viper_rep/rev_a/chconf.h
@@ -0,0 +1,23 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define CH_CFG_ST_FREQUENCY 10000
+
+#define CH_CFG_ST_RESOLUTION 16
+
+#include_next <chconf.h>
diff --git a/keyboards/4pplet/eagle_viper_rep/rev_a/config.h b/keyboards/4pplet/eagle_viper_rep/rev_a/config.h
new file mode 100644
index 0000000000..4edb4754e9
--- /dev/null
+++ b/keyboards/4pplet/eagle_viper_rep/rev_a/config.h
@@ -0,0 +1,72 @@
+/*
+Copyright 2021 Stefan Sundin "4pplet" <4pplet@protonmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x4444
+#define PRODUCT_ID      0x0007
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    4pplet
+#define PRODUCT         Eagle Viper REP Rev A
+
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 7
+
+#define MATRIX_COL_PINS { A0, B1, B0, A4, B5, B4, B3 }
+#define MATRIX_ROW_PINS { A2, A1, B8, A10, C15, A15, B7, B6, C14, C13}
+#define DIODE_DIRECTION COL2ROW
+
+/* In switch leds */
+#define BACKLIGHT_PIN           A3
+#define BACKLIGHT_PWM_DRIVER    PWMD2
+#define BACKLIGHT_PWM_CHANNEL   4
+#define BACKLIGHT_PAL_MODE      2
+#define BACKLIGHT_ON_STATE      1
+#define BACKLIGHT_LEVELS        10
+#define BACKLIGHT_BREATHING     TRUE
+
+/* Underglow */
+#define RGB_DI_PIN  A7
+#define WS2812_SPI  SPID1
+#define WS2812_SPI_MOSI_PAL_MODE 0
+#define WS2812_SPI_SCK_PIN A5
+#define WS2812_SPI_SCK_PAL_MODE 0
+#define RGBLED_NUM  16
+#define RGBLIGHT_ANIMATIONS
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Indicator leds */
+#define LOCK_LIGHTS     TRUE
+#define DISPLAY_LAYERS  TRUE
+#define CAPS_PIN        B2
+#define NUM_PIN         B12
+#define SCROLL_PIN      B13
+#define LAYER_1         B14
+#define LAYER_2         B15
+#define LAYER_3         A8
+#define LAYER_4         A9
+#define LAYER_5         B9
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Added extra layer for use of layer leds */
+#define DYNAMIC_KEYMAP_LAYER_COUNT 5
diff --git a/keyboards/4pplet/eagle_viper_rep/rev_a/halconf.h b/keyboards/4pplet/eagle_viper_rep/rev_a/halconf.h
new file mode 100644
index 0000000000..b0dad8d4a4
--- /dev/null
+++ b/keyboards/4pplet/eagle_viper_rep/rev_a/halconf.h
@@ -0,0 +1,25 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define HAL_USE_I2C FALSE
+
+#define HAL_USE_PWM TRUE
+
+#define HAL_USE_SPI TRUE
+
+#include_next <halconf.h>
diff --git a/keyboards/4pplet/eagle_viper_rep/rev_a/mcuconf.h b/keyboards/4pplet/eagle_viper_rep/rev_a/mcuconf.h
new file mode 100644
index 0000000000..ffa97b392c
--- /dev/null
+++ b/keyboards/4pplet/eagle_viper_rep/rev_a/mcuconf.h
@@ -0,0 +1,34 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This file was auto-generated by:
+ *    `qmk chibios-confmigrate -i keyboards/cannonkeys/db60/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h`
+ */
+
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef STM32_PWM_USE_TIM2
+#define STM32_PWM_USE_TIM2 TRUE
+
+#undef STM32_SPI_USE_SPI1
+#define STM32_SPI_USE_SPI1 TRUE
+
+/* Reallocate the SysTick timer from TIM2 to TIM3, TIM2 is used for in switch leds */
+#undef STM32_ST_USE_TIMER
+#define STM32_ST_USE_TIMER 3
diff --git a/keyboards/4pplet/eagle_viper_rep/rev_a/readme.md b/keyboards/4pplet/eagle_viper_rep/rev_a/readme.md
new file mode 100644
index 0000000000..76415fd6c0
--- /dev/null
+++ b/keyboards/4pplet/eagle_viper_rep/rev_a/readme.md
@@ -0,0 +1,19 @@
+# Viper/Eagle REP Rev A
+
+A alternative PCB for Viper and Eagle V2 and V3
+
+* Keyboard Maintainer: [4pplet](https://github.com/4pplet)
+* Hardware Supported: Viper/Eagle REP Rev A
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 4pplet/eagle_viper_rep/rev_a:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+How to enter bootloader (DFU):
+* Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
+* Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it.
+
+Alternative option if the firmware is already pre-flashed:
+* Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default.
diff --git a/keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c b/keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c
new file mode 100644
index 0000000000..2971460bd2
--- /dev/null
+++ b/keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c
@@ -0,0 +1,108 @@
+/*
+Copyright 2021 Stefan Sundin "4pplet" <4pplet@protonmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "rev_a.h"
+
+void board_init(void) {
+    setPinInputHigh(CAPS_PIN);
+    setPinInputHigh(SCROLL_PIN);
+    setPinInputHigh(NUM_PIN);
+}
+
+/* Set indicator leds to indicate lock states */
+bool led_update_kb(led_t led_state) {
+    bool res = led_update_user(led_state);
+    if(res && LOCK_LIGHTS) {
+        if(led_state.caps_lock){
+            setPinOutput(CAPS_PIN);
+            writePin(CAPS_PIN, 0);
+        }
+        else
+            setPinInputHigh(CAPS_PIN);
+        if(led_state.scroll_lock){
+            setPinOutput(SCROLL_PIN);
+            writePin(SCROLL_PIN, 0);
+        }
+        else
+            setPinInputHigh(SCROLL_PIN);
+        if(led_state.num_lock){
+            setPinOutput(NUM_PIN);
+            writePin(NUM_PIN, 0);
+        }
+        else
+            setPinInputHigh(NUM_PIN);
+    }
+    return res;
+}
+
+layer_state_t layer_state_set_kb(layer_state_t state) {
+    state = layer_state_set_user(state);
+    if(DISPLAY_LAYERS){
+        setLayerLed(state);
+    }
+    return state;
+}
+/* Set indicator leds to indicate which layer is active */
+void setLayerLed(layer_state_t state){
+    switch(get_highest_layer(state)){
+        case 0 :
+            setPinOutput(LAYER_1);
+            writePin(LAYER_1, 0);
+            setPinInputHigh(LAYER_2);
+            setPinInputHigh(LAYER_3);
+            setPinInputHigh(LAYER_4);
+            setPinInputHigh(LAYER_5);
+            break;
+        case 1 :
+            setPinOutput(LAYER_2);
+            writePin(LAYER_2, 0);
+            setPinInputHigh(LAYER_1);
+            setPinInputHigh(LAYER_3);
+            setPinInputHigh(LAYER_4);
+            setPinInputHigh(LAYER_5);
+            break;
+        case 2 :
+            setPinOutput(LAYER_3);
+            writePin(LAYER_3, 0);
+            setPinInputHigh(LAYER_1);
+            setPinInputHigh(LAYER_2);
+            setPinInputHigh(LAYER_4);
+            setPinInputHigh(LAYER_5);
+            break;
+        case 3 :
+            writePin(LAYER_4, 0);
+            setPinInputHigh(LAYER_5);
+            setPinInputHigh(LAYER_1);
+            setPinInputHigh(LAYER_2);
+            setPinInputHigh(LAYER_3);
+            setPinOutput(LAYER_4);
+            break;
+        case 4 :
+            setPinOutput(LAYER_5);
+            writePin(LAYER_5, 0);
+            setPinInputHigh(LAYER_1);
+            setPinInputHigh(LAYER_2);
+            setPinInputHigh(LAYER_3);
+            setPinInputHigh(LAYER_4);
+            break;
+        default :
+            setPinInputHigh(LAYER_1);
+            setPinInputHigh(LAYER_2);
+            setPinInputHigh(LAYER_3);
+            setPinInputHigh(LAYER_4);
+            setPinInputHigh(LAYER_5);
+    }
+}
diff --git a/keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.h b/keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.h
new file mode 100644
index 0000000000..5dac41f921
--- /dev/null
+++ b/keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.h
@@ -0,0 +1,41 @@
+/*
+Copyright 2021 Stefan Sundin "4pplet" <4pplet@protonmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+#include "quantum.h"
+
+void setLayerLed(layer_state_t state);
+
+#define LAYOUT_all( \
+    k00, k10, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k16, k36, \
+    k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k56,\
+    k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k76,\
+    k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k96,\
+    k80, k90, k91, k93, k94, k85, k95, k86  \
+) \
+{ \
+    {k00, k01, k02, k03, k04, k05, k06}, \
+    {k10, k11, k12, k13, k14, k15, k16}, \
+    {k20, k21, k22, k23, k24, k25, k26}, \
+    {k30, k31, k32, k33, k34, k35, k36}, \
+    {k40, k41, k42, k43, k44, k45, k46}, \
+    {k50, k51, k52, k53, k54, k55, k56}, \
+    {k60, k61, k62, k63, k64, k65, k66}, \
+    {k70, k71, k72, k73, k74, k75, k76}, \
+    {k80, KC_NO, KC_NO, KC_NO, KC_NO, k85, k86}, \
+    {k90, k91, KC_NO, k93, k94, k95, k96}  \
+}
diff --git a/keyboards/4pplet/eagle_viper_rep/rev_a/rules.mk b/keyboards/4pplet/eagle_viper_rep/rev_a/rules.mk
new file mode 100644
index 0000000000..2a1539ed5d
--- /dev/null
+++ b/keyboards/4pplet/eagle_viper_rep/rev_a/rules.mk
@@ -0,0 +1,23 @@
+# MCU name
+MCU = STM32F072
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes   # Mouse keys
+EXTRAKEY_ENABLE = yes   # Audio control and System control
+CONSOLE_ENABLE = yes    # Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes       # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes
+BACKLIGHT_DRIVER = pwm
+RGBLIGHT_ENABLE = yes
+WS2812_DRIVER = spi
+
+# Wildcard to allow APM32 MCU
+DFU_SUFFIX_ARGS = -p FFFF -v FFFF
+
+# Enter lower-power sleep mode when on the ChibiOS idle thread
+OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE