@chapter Filtergraph description @c man begin FILTERGRAPH DESCRIPTION A filtergraph is a directed graph of connected filters. It can contain cycles, and there can be multiple links between a pair of filters. Each link has one input pad on one side connecting it to one filter from which it takes its input, and one output pad on the other side connecting it to one filter accepting its output. Each filter in a filtergraph is an instance of a filter class registered in the application, which defines the features and the number of input and output pads of the filter. A filter with no input pads is called a "source", and a filter with no output pads is called a "sink". @anchor{Filtergraph syntax} @section Filtergraph syntax A filtergraph has a textual representation, which is recognized by the @option{-filter}/@option{-vf} and @option{-filter_complex} options in @command{avconv} and @option{-vf} in @command{avplay}, and by the @code{avfilter_graph_parse()}/@code{avfilter_graph_parse2()} functions defined in @file{libavfilter/avfilter.h}. A filterchain consists of a sequence of connected filters, each one connected to the previous one in the sequence. A filterchain is represented by a list of ","-separated filter descriptions. A filtergraph consists of a sequence of filterchains. A sequence of filterchains is represented by a list of ";"-separated filterchain descriptions. A filter is represented by a string of the form: [@var{in_link_1}]...[@var{in_link_N}]@var{filter_name}=@var{arguments}[@var{out_link_1}]...[@var{out_link_M}] @var{filter_name} is the name of the filter class of which the described filter is an instance of, and has to be the name of one of the filter classes registered in the program. The name of the filter class is optionally followed by a string "=@var{arguments}". @var{arguments} is a string which contains the parameters used to initialize the filter instance. It may have one of two forms: @itemize @item A ':'-separated list of @var{key=value} pairs. @item A ':'-separated list of @var{value}. In this case, the keys are assumed to be the option names in the order they are declared. E.g. the @code{fade} filter declares three options in this order -- @option{type}, @option{start_frame} and @option{nb_frames}. Then the parameter list @var{in:0:30} means that the value @var{in} is assigned to the option @option{type}, @var{0} to @option{start_frame} and @var{30} to @option{nb_frames}. @end itemize If the option value itself is a list of items (e.g. the @code{format} filter takes a list of pixel formats), the items in the list are usually separated by '|'. The list of arguments can be quoted using the character "'" as initial and ending mark, and the character '\' for escaping the characters within the quoted text; otherwise the argument string is considered terminated when the next special character (belonging to the set "[]=;,") is encountered. The name and arguments of the filter are optionally preceded and followed by a list of link labels. A link label allows to name a link and associate it to a filter output or input pad. The preceding labels @var{in_link_1} ... @var{in_link_N}, are associated to the filter input pads, the following labels @var{out_link_1} ... @var{out_link_M}, are associated to the output pads. When two link labels with the same name are found in the filtergraph, a link between the corresponding input and output pad is created. If an output pad is not labelled, it is linked by default to the first unlabelled input pad of the next filter in the filterchain. For example in the filterchain @example nullsrc, split[L1], [L2]overlay, nullsink @end example the split filter instance has two output pads, and the overlay filter instance two input pads. The first output pad of split is labelled "L1", the first input pad of overlay is labelled "L2", and the second output pad of split is linked to the second input pad of overlay, which are both unlabelled. In a complete filterchain all the unlabelled filter input and output pads must be connected. A filtergraph is considered valid if all the filter input and output pads of all the filterchains are connected. Libavfilter will automatically insert @ref{scale} filters where format conversion is required. It is possible to specify swscale flags for those automatically inserted scalers by prepending @code{sws_flags=@var{flags};} to the filtergraph description. Here is a BNF description of the filtergraph syntax: @example @var{NAME} ::= sequence of alphanumeric characters and '_' @var{LINKLABEL} ::= "[" @var{NAME} "]" @var{LINKLABELS} ::= @var{LINKLABEL} [@var{LINKLABELS}] @var{FILTER_ARGUMENTS} ::= sequence of chars (possibly quoted) @var{FILTER} ::= [@var{LINKLABELS}] @var{NAME} ["=" @var{FILTER_ARGUMENTS}] [@var{LINKLABELS}] @var{FILTERCHAIN} ::= @var{FILTER} [,@var{FILTERCHAIN}] @var{FILTERGRAPH} ::= [sws_flags=@var{flags};] @var{FILTERCHAIN} [;@var{FILTERGRAPH}] @end example @c man end FILTERGRAPH DESCRIPTION @chapter Audio Filters @c man begin AUDIO FILTERS When you configure your Libav build, you can disable any of the existing filters using --disable-filters. The configure output will show the audio filters included in your build. Below is a description of the currently available audio filters. @section aformat Convert the input audio to one of the specified formats. The framework will negotiate the most appropriate format to minimize conversions. It accepts the following parameters: @table @option @item sample_fmts A '|'-separated list of requested sample formats. @item sample_rates A '|'-separated list of requested sample rates. @item channel_layouts A '|'-separated list of requested channel layouts. @end table If a parameter is omitted, all values are allowed. Force the output to either unsigned 8-bit or signed 16-bit stereo @example aformat=sample_fmts=u8|s16:channel_layouts=stereo @end example @section amix Mixes multiple audio inputs into a single output. For example @example avconv -i INPUT1 -i INPUT2 -i INPUT3 -filter_complex amix=inputs=3:duration=first:dropout_transition=3 OUTPUT @end example will mix 3 input audio streams to a single output with the same duration as the first input and a dropout transition time of 3 seconds. It accepts the following parameters: @table @option @item inputs The number of inputs. If unspecified, it defaults to 2. @item duration How to determine the end-of-stream. @table @option @item longest The duration of the longest input. (default) @item shortest The duration of the shortest input. @item first The duration of the first input. @end table @item dropout_transition The transition time, in seconds, for volume renormalization when an input stream ends. The default value is 2 seconds. @end table @section anull Pass the audio source unchanged to the output. @section asetpts Change the PTS (presentation timestamp) of the input audio frames. It accepts the following parameters: @table @option @item expr The expression which is evaluated for each frame to construct its timestamp. @end table The expression is evaluated through the eval API and can contain the following constants: @table @option @item FRAME_RATE frame rate, only defined for constant frame-rate video @item PTS the presentation timestamp in input @item E, PI, PHI These are approximated values for the mathematical constants e (Euler's number), pi (Greek pi), and phi (the golden ratio). @item N The number of audio samples passed through the filter so far, starting at 0. @item S The number of audio samples in the current frame. @item SR The audio sample rate. @item STARTPTS The PTS of the first frame. @item PREV_INPTS The previous input PTS. @item PREV_OUTPTS The previous output PTS. @item RTCTIME The wallclock (RTC) time in microseconds. @item RTCSTART The wallclock (RTC) time at the start of the movie in microseconds. @end table Some examples: @example # Start counting PTS from zero asetpts=expr=PTS-STARTPTS # Generate timestamps by counting samples asetpts=expr=N/SR/TB # Generate timestamps from a "live source" and rebase onto the current timebase asetpts='(RTCTIME - RTCSTART) / (TB * 1000000)" @end example @section asettb Set the timebase to use for the output frames timestamps. It is mainly useful for testing timebase configuration. This filter accepts the following parameters: @table @option @item expr The expression which is evaluated into the output timebase. @end table The expression can contain the constants @var{PI}, @var{E}, @var{PHI}, @var{AVTB} (the default timebase), @var{intb} (the input timebase), and @var{sr} (the sample rate, audio only). The default value for the input is @var{intb}. Some examples: @example # Set the timebase to 1/25: settb=1/25 # Set the timebase to 1/10: settb=0.1 # Set the timebase to 1001/1000: settb=1+0.001 # Set the timebase to 2*intb: settb=2*intb # Set the default timebase value: settb=AVTB # Set the timebase to twice the sample rate: asettb=sr*2 @end example @section ashowinfo Show a line containing various information for each input audio frame. The input audio is not modified. The shown line contains a sequence of key/value pairs of the form @var{key}:@var{value}. It accepts the following parameters: @table @option @item n The (sequential) number of the input frame, starting from 0. @item pts The presentation timestamp of the input frame, in time base units; the time base depends on the filter input pad, and is usually 1/@var{sample_rate}. @item pts_time The presentation timestamp of the input frame in seconds. @item fmt The sample format. @item chlayout The channel layout. @item rate The sample rate for the audio frame. @item nb_samples The number of samples (per channel) in the frame. @item checksum The Adler-32 checksum (printed in hexadecimal) of the audio data. For planar audio, the data is treated as if all the planes were concatenated. @item plane_checksums A list of Adler-32 checksums for each data plane. @end table @section asplit Split input audio into several identical outputs. It accepts a single parameter, which specifies the number of outputs. If unspecified, it defaults to 2. For example, @example avconv -i INPUT -filter_complex asplit=5 OUTPUT @end example will create 5 copies of the input audio. @section asyncts Synchronize audio data with timestamps by squeezing/stretching it and/or dropping samples/adding silence when needed. It accepts the following parameters: @table @option @item compensate Enable stretching/squeezing the data to make it match the timestamps. Disabled by default. When disabled, time gaps are covered with silence. @item min_delta The minimum difference between timestamps and audio data (in seconds) to trigger adding/dropping samples. The default value is 0.1. If you get an imperfect sync with this filter, try setting this parameter to 0. @item max_comp The maximum compensation in samples per second. Only relevant with compensate=1. The default value is 500. @item first_pts Assume that the first PTS should be this value. The time base is 1 / sample rate. This allows for padding/trimming at the start of the stream. By default, no assumption is made about the first frame's expected PTS, so no padding or trimming is done. For example, this could be set to 0 to pad the beginning with silence if an audio stream starts after the video stream or to trim any samples with a negative PTS due to encoder delay. @end table @section atrim Trim the input so that the output contains one continuous subpart of the input. It accepts the following parameters: @table @option @item start Timestamp (in seconds) of the start of the section to keep. I.e. the audio sample with the timestamp @var{start} will be the first sample in the output. @item end Timestamp (in seconds) of the first audio sample that will be dropped. I.e. the audio sample immediately preceding the one with the timestamp @var{end} will be the last sample in the output. @item start_pts Same as @var{start}, except this option sets the start timestamp in samples instead of seconds. @item end_pts Same as @var{end}, except this option sets the end timestamp in samples instead of seconds. @item duration The maximum duration of the output in seconds. @item start_sample The number of the first sample that should be output. @item end_sample The number of the first sample that should be dropped. @end table Note that the first two sets of the start/end options and the @option{duration} option look at the frame timestamp, while the _sample options simply count the samples that pass through the filter. So start/end_pts and start/end_sample will give different results when the timestamps are wrong, inexact or do not start at zero. Also note that this filter does not modify the timestamps. If you wish to have the output timestamps start at zero, insert the asetpts filter after the atrim filter. If multiple start or end options are set, this filter tries to be greedy and keep all samples that match at least one of the specified constraints. To keep only the part that matches all the constraints at once, chain multiple atrim filters. The defaults are such that all the input is kept. So it is possible to set e.g. just the end values to keep everything before the specified time. Examples: @itemize @item Drop everything except the second minute of input: @example avconv -i INPUT -af atrim=60:120 @end example @item Keep only the first 1000 samples: @example avconv -i INPUT -af atrim=end_sample=1000 @end example @end itemize @section bs2b Bauer stereo to binaural transformation, which improves headphone listening of stereo audio records. It accepts the following parameters: @table @option @item profile Pre-defined crossfeed level. @table @option @item default Default level (fcut=700, feed=50). @item cmoy Chu Moy circuit (fcut=700, feed=60). @item jmeier Jan Meier circuit (fcut=650, feed=95). @end table @item fcut Cut frequency (in Hz). @item feed Feed level (in Hz). @end table @section channelsplit Split each channel from an input audio stream into a separate output stream. It accepts the following parameters: @table @option @item channel_layout The channel layout of the input stream. The default is "stereo". @end table For example, assuming a stereo input MP3 file, @example avconv -i in.mp3 -filter_complex channelsplit out.mkv @end example will create an output Matroska file with two audio streams, one containing only the left channel and the other the right channel. Split a 5.1 WAV file into per-channel files: @example avconv -i in.wav -filter_complex 'channelsplit=channel_layout=5.1[FL][FR][FC][LFE][SL][SR]' -map '[FL]' front_left.wav -map '[FR]' front_right.wav -map '[FC]' front_center.wav -map '[LFE]' low_frequency_effects.wav -map '[SL]' side_left.wav -map '[SR]' side_right.wav @end example @section channelmap Remap input channels to new locations. It accepts the following parameters: @table @option @item channel_layout The channel layout of the output stream. @item map Map channels from input to output. The argument is a '|'-separated list of mappings, each in the @code{@var{in_channel}-@var{out_channel}} or @var{in_channel} form. @var{in_channel} can be either the name of the input channel (e.g. FL for front left) or its index in the input channel layout. @var{out_channel} is the name of the output channel or its index in the output channel layout. If @var{out_channel} is not given then it is implicitly an index, starting with zero and increasing by one for each mapping. @end table If no mapping is present, the filter will implicitly map input channels to output channels, preserving indices. For example, assuming a 5.1+downmix input MOV file, @example avconv -i in.mov -filter 'channelmap=map=DL-FL|DR-FR' out.wav @end example will create an output WAV file tagged as stereo from the downmix channels of the input. To fix a 5.1 WAV improperly encoded in AAC's native channel order @example avconv -i in.wav -filter 'channelmap=1|2|0|5|3|4:5.1' out.wav @end example @section compand Compress or expand the audio's dynamic range. It accepts the following parameters: @table @option @item attacks @item decays A list of times in seconds for each channel over which the instantaneous level of the input signal is averaged to determine its volume. @var{attacks} refers to increase of volume and @var{decays} refers to decrease of volume. For most situations, the attack time (response to the audio getting louder) should be shorter than the decay time, because the human ear is more sensitive to sudden loud audio than sudden soft audio. A typical value for attack is 0.3 seconds and a typical value for decay is 0.8 seconds. @item points A list of points for the transfer function, specified in dB relative to the maximum possible signal amplitude. Each key points list must be defined using the following syntax: @code{x0/y0|x1/y1|x2/y2|....} The input values must be in strictly increasing order but the transfer function does not have to be monotonically rising. The point @code{0/0} is assumed but may be overridden (by @code{0/out-dBn}). Typical values for the transfer function are @code{-70/-70|-60/-20}. @item soft-knee Set the curve radius in dB for all joints. It defaults to 0.01. @item gain Set the additional gain in dB to be applied at all points on the transfer function. This allows for easy adjustment of the overall gain. It defaults to 0. @item volume Set an initial volume, in dB, to be assumed for each channel when filtering starts. This permits the user to supply a nominal level initially, so that, for example, a very large gain is not applied to initial signal levels before the companding has begun to operate. A typical value for audio which is initially quiet is -90 dB. It defaults to 0. @item delay Set a delay, in seconds. The input audio is analyzed immediately, but audio is delayed before being fed to the volume adjuster. Specifying a delay approximately equal to the attack/decay times allows the filter to effectively operate in predictive rather than reactive mode. It defaults to 0. @end table @subsection Examples @itemize @item Make music with both quiet and loud passages suitable for listening to in a noisy environment: @example compand=.3|.3:1|1:-90/-60|-60/-40|-40/-30|-20/-20:6:0:-90:0.2 @end example @item A noise gate for when the noise is at a lower level than the signal: @example compand=.1|.1:.2|.2:-900/-900|-50.1/-900|-50/-50:.01:0:-90:.1 @end example @item Here is another noise gate, this time for when the noise is at a higher level than the signal (making it, in some ways, similar to squelch): @example compand=.1|.1:.1|.1:-45.1/-45.1|-45/-900|0/-900:.01:45:-90:.1 @end example @end itemize @section join Join multiple input streams into one multi-channel stream. It accepts the following parameters: @table @option @item inputs The number of input streams. It defaults to 2. @item channel_layout The desired output channel layout. It defaults to stereo. @item map Map channels from inputs to output. The argument is a '|'-separated list of mappings, each in the @code{@var{input_idx}.@var{in_channel}-@var{out_channel}} form. @var{input_idx} is the 0-based index of the input stream. @var{in_channel} can be either the name of the input channel (e.g. FL for front left) or its index in the specified input stream. @var{out_channel} is the name of the output channel. @end table The filter will attempt to guess the mappings when they are not specified explicitly. It does so by first trying to find an unused matching input channel and if that fails it picks the first unused input channel. Join 3 inputs (with properly set channel layouts): @example avconv -i INPUT1 -i INPUT2 -i INPUT3 -filter_complex join=inputs=3 OUTPUT @end example Build a 5.1 output from 6 single-channel streams: @example avconv -i fl -i fr -i fc -i sl -i sr -i lfe -filter_complex 'join=inputs=6:channel_layout=5.1:map=0.0-FL|1.0-FR|2.0-FC|3.0-SL|4.0-SR|5.0-LFE' out @end example @section resample Convert the audio sample format, sample rate and channel layout. It is not meant to be used directly; it is inserted automatically by libavfilter whenever conversion is needed. Use the @var{aformat} filter to force a specific conversion. @section volume Adjust the input audio volume. It accepts the following parameters: @table @option @item volume This expresses how the audio volume will be increased or decreased. Output values are clipped to the maximum value. The output audio volume is given by the relation: @example @var{output_volume} = @var{volume} * @var{input_volume} @end example The default value for @var{volume} is 1.0. @item precision This parameter represents the mathematical precision. It determines which input sample formats will be allowed, which affects the precision of the volume scaling. @table @option @item fixed 8-bit fixed-point; this limits input sample format to U8, S16, and S32. @item float 32-bit floating-point; this limits input sample format to FLT. (default) @item double 64-bit floating-point; this limits input sample format to DBL. @end table @item replaygain Choose the behaviour on encountering ReplayGain side data in input frames. @table @option @item drop Remove ReplayGain side data, ignoring its contents (the default). @item ignore Ignore ReplayGain side data, but leave it in the frame. @item track Prefer the track gain, if present. @item album Prefer the album gain, if present. @end table @item replaygain_preamp Pre-amplification gain in dB to apply to the selected replaygain gain. Default value for @var{replaygain_preamp} is 0.0. @item replaygain_noclip Prevent clipping by limiting the gain applied. Default value for @var{replaygain_noclip} is 1. @end table @subsection Examples @itemize @item Halve the input audio volume: @example volume=volume=0.5 volume=volume=1/2 volume=volume=-6.0206dB @end example @item Increase input audio power by 6 decibels using fixed-point precision: @example volume=volume=6dB:precision=fixed @end example @end itemize @c man end AUDIO FILTERS @chapter Audio Sources @c man begin AUDIO SOURCES Below is a description of the currently available audio sources. @section anullsrc The null audio source; it never returns audio frames. It is mainly useful as a template and for use in analysis / debugging tools. It accepts, as an optional parameter, a string of the form @var{sample_rate}:@var{channel_layout}. @var{sample_rate} specifies the sample rate, and defaults to 44100. @var{channel_layout} specifies the channel layout, and can be either an integer or a string representing a channel layout. The default value of @var{channel_layout} is 3, which corresponds to CH_LAYOUT_STEREO. Check the channel_layout_map definition in @file{libavutil/channel_layout.c} for the mapping between strings and channel layout values. Some examples: @example # Set the sample rate to 48000 Hz and the channel layout to CH_LAYOUT_MONO anullsrc=48000:4 # The same as above anullsrc=48000:mono @end example @section abuffer Buffer audio frames, and make them available to the filter chain. This source is not intended to be part of user-supplied graph descriptions; it is for insertion by calling programs, through the interface defined in @file{libavfilter/buffersrc.h}. It accepts the following parameters: @table @option @item time_base The timebase which will be used for timestamps of submitted frames. It must be either a floating-point number or in @var{numerator}/@var{denominator} form. @item sample_rate The audio sample rate. @item sample_fmt The name of the sample format, as returned by @code{av_get_sample_fmt_name()}. @item channel_layout The channel layout of the audio data, in the form that can be accepted by @code{av_get_channel_layout()}. @end table All the parameters need to be explicitly defined. @c man end AUDIO SOURCES @chapter Audio Sinks @c man begin AUDIO SINKS Below is a description of the currently available audio sinks. @section anullsink Null audio sink; do absolutely nothing with the input audio. It is mainly useful as a template and for use in analysis / debugging tools. @section abuffersink This sink is intended for programmatic use. Frames that arrive on this sink can be retrieved by the calling program, using the interface defined in @file{libavfilter/buffersink.h}. It does not accept any parameters. @c man end AUDIO SINKS @chapter Video Filters @c man begin VIDEO FILTERS When you configure your Libav build, you can disable any of the existing filters using --disable-filters. The configure output will show the video filters included in your build. Below is a description of the currently available video filters. @section blackframe Detect frames that are (almost) completely black. Can be useful to detect chapter transitions or commercials. Output lines consist of the frame number of the detected frame, the percentage of blackness, the position in the file if known or -1 and the timestamp in seconds. In order to display the output lines, you need to set the loglevel at least to the AV_LOG_INFO value. It accepts the following parameters: @table @option @item amount The percentage of the pixels that have to be below the threshold; it defaults to 98. @item threshold The threshold below which a pixel value is considered black; it defaults to 32. @end table @section boxblur Apply a boxblur algorithm to the input video. It accepts the following parameters: @table @option @item luma_radius @item luma_power @item chroma_radius @item chroma_power @item alpha_radius @item alpha_power @end table The chroma and alpha parameters are optional. If not specified, they default to the corresponding values set for @var{luma_radius} and @var{luma_power}. @var{luma_radius}, @var{chroma_radius}, and @var{alpha_radius} represent the radius in pixels of the box used for blurring the corresponding input plane. They are expressions, and can contain the following constants: @table @option @item w, h The input width and height in pixels. @item cw, ch The input chroma image width and height in pixels. @item hsub, vsub The horizontal and vertical chroma subsample values. For example, for the pixel format "yuv422p", @var{hsub} is 2 and @var{vsub} is 1. @end table The radius must be a non-negative number, and must not be greater than the value of the expression @code{min(w,h)/2} for the luma and alpha planes, and of @code{min(cw,ch)/2} for the chroma planes. @var{luma_power}, @var{chroma_power}, and @var{alpha_power} represent how many times the boxblur filter is applied to the corresponding plane. Some examples: @itemize @item Apply a boxblur filter with the luma, chroma, and alpha radii set to 2: @example boxblur=luma_radius=2:luma_power=1 @end example @item Set the luma radius to 2, and alpha and chroma radius to 0: @example boxblur=2:1:0:0:0:0 @end example @item Set the luma and chroma radii to a fraction of the video dimension: @example boxblur=luma_radius=min(h\,w)/10:luma_power=1:chroma_radius=min(cw\,ch)/10:chroma_power=1 @end example @end itemize @section copy Copy the input source unchanged to the output. This is mainly useful for testing purposes. @section crop Crop the input video to given dimensions. It accepts the following parameters: @table @option @item out_w The width of the output video. @item out_h The height of the output video. @item x The horizontal position, in the input video, of the left edge of the output video. @item y The vertical position, in the input video, of the top edge of the output video. @end table The parameters are expressions containing the following constants: @table @option @item E, PI, PHI These are approximated values for the mathematical constants e (Euler's number), pi (Greek pi), and phi (the golden ratio). @item x, y The computed values for @var{x} and @var{y}. They are evaluated for each new frame. @item in_w, in_h The input width and height. @item iw, ih These are the same as @var{in_w} and @var{in_h}. @item out_w, out_h The output (cropped) width and height. @item ow, oh These are the same as @var{out_w} and @var{out_h}. @item n The number of the input frame, starting from 0. @item t The timestamp expressed in seconds. It's NAN if the input timestamp is unknown. @end table The @var{out_w} and @var{out_h} parameters specify the expressions for the width and height of the output (cropped) video. They are only evaluated during the configuration of the filter. The default value of @var{out_w} is "in_w", and the default value of @var{out_h} is "in_h". The expression for @var{out_w} may depend on the value of @var{out_h}, and the expression for @var{out_h} may depend on @var{out_w}, but they cannot depend on @var{x} and @var{y}, as @var{x} and @var{y} are evaluated after @var{out_w} and @var{out_h}. The @var{x} and @var{y} parameters specify the expressions for the position of the top-left corner of the output (non-cropped) area. They are evaluated for each frame. If the evaluated value is not valid, it is approximated to the nearest valid value. The default value of @var{x} is "(in_w-out_w)/2", and the default value for @var{y} is "(in_h-out_h)/2", which set the cropped area at the center of the input image. The expression for @var{x} may depend on @var{y}, and the expression for @var{y} may depend on @var{x}. Some examples: @example # Crop the central input area with size 100x100 crop=out_w=100:out_h=100 # Crop the central input area with size 2/3 of the input video "crop=out_w=2/3*in_w:out_h=2/3*in_h" # Crop the input video central square crop=out_w=in_h # Delimit the rectangle with the top-left corner placed at position # 100:100 and the right-bottom corner corresponding to the right-bottom # corner of the input image crop=out_w=in_w-100:out_h=in_h-100:x=100:y=100 # Crop 10 pixels from the left and right borders, and 20 pixels from # the top and bottom borders "crop=out_w=in_w-2*10:out_h=in_h-2*20" # Keep only the bottom right quarter of the input image "crop=out_w=in_w/2:out_h=in_h/2:x=in_w/2:y=in_h/2" # Crop height for getting Greek harmony "crop=out_w=in_w:out_h=1/PHI*in_w" # Trembling effect "crop=in_w/2:in_h/2:(in_w-out_w)/2+((in_w-out_w)/2)*sin(n/10):(in_h-out_h)/2 +((in_h-out_h)/2)*sin(n/7)" # Erratic camera effect depending on timestamp "crop=out_w=in_w/2:out_h=in_h/2:x=(in_w-out_w)/2+((in_w-out_w)/2)*sin(t*10):y=(in_h-out_h)/2 +((in_h-out_h)/2)*sin(t*13)" # Set x depending on the value of y "crop=in_w/2:in_h/2:y:10+10*sin(n/10)" @end example @section cropdetect Auto-detect the crop size. It calculates the necessary cropping parameters and prints the recommended parameters via the logging system. The detected dimensions correspond to the non-black area of the input video. It accepts the following parameters: @table @option @item limit The threshold, an optional parameter between nothing (0) and everything (255). It defaults to 24. @item round The value which the width/height should be divisible by. It defaults to 16. The offset is automatically adjusted to center the video. Use 2 to get only even dimensions (needed for 4:2:2 video). 16 is best when encoding to most video codecs. @item reset A counter that determines how many frames cropdetect will reset the previously detected largest video area after. It will then start over and detect the current optimal crop area. It defaults to 0. This can be useful when channel logos distort the video area. 0 indicates 'never reset', and returns the largest area encountered during playback. @end table @section delogo Suppress a TV station logo by a simple interpolation of the surrounding pixels. Just set a rectangle covering the logo and watch it disappear (and sometimes something even uglier appear - your mileage may vary). It accepts the following parameters: @table @option @item x, y Specify the top left corner coordinates of the logo. They must be specified. @item w, h Specify the width and height of the logo to clear. They must be specified. @item band, t Specify the thickness of the fuzzy edge of the rectangle (added to @var{w} and @var{h}). The default value is 4. @item show When set to 1, a green rectangle is drawn on the screen to simplify finding the right @var{x}, @var{y}, @var{w}, @var{h} parameters, and @var{band} is set to 4. The default value is 0. @end table An example: @itemize @item Set a rectangle covering the area with top left corner coordinates 0,0 and size 100x77, and a band of size 10: @example delogo=x=0:y=0:w=100:h=77:band=10 @end example @end itemize @section drawbox Draw a colored box on the input image. It accepts the following parameters: @table @option @item x, y Specify the top left corner coordinates of the box. It defaults to 0. @item width, height Specify the width and height of the box; if 0 they are interpreted as the input width and height. It defaults to 0. @item color Specify the color of the box to write. It can be the name of a color (case insensitive match) or a 0xRRGGBB[AA] sequence. @end table Some examples: @example # Draw a black box around the edge of the input image drawbox # Draw a box with color red and an opacity of 50% drawbox=x=10:y=20:width=200:height=60:color=red@@0.5" @end example @section drawtext Draw a text string or text from a specified file on top of a video, using the libfreetype library. To enable compilation of this filter, you need to configure Libav with @code{--enable-libfreetype}. To enable default font fallback and the @var{font} option you need to configure Libav with @code{--enable-libfontconfig}. The filter also recognizes strftime() sequences in the provided text and expands them accordingly. Check the documentation of strftime(). It accepts the following parameters: @table @option @item font The font family to be used for drawing text. By default Sans. @item fontfile The font file to be used for drawing text. The path must be included. This parameter is mandatory if the fontconfig support is disabled. @item text The text string to be drawn. The text must be a sequence of UTF-8 encoded characters. This parameter is mandatory if no file is specified with the parameter @var{textfile}. @item textfile A text file containing text to be drawn. The text must be a sequence of UTF-8 encoded characters. This parameter is mandatory if no text string is specified with the parameter @var{text}. If both text and textfile are specified, an error is thrown. @item x, y The offsets where text will be drawn within the video frame. It is relative to the top/left border of the output image. They accept expressions similar to the @ref{overlay} filter: @table @option @item x, y The computed values for @var{x} and @var{y}. They are evaluated for each new frame. @item main_w, main_h The main input width and height. @item W, H These are the same as @var{main_w} and @var{main_h}. @item text_w, text_h The rendered text's width and height. @item w, h These are the same as @var{text_w} and @var{text_h}. @item n The number of frames processed, starting from 0. @item t The timestamp, expressed in seconds. It's NAN if the input timestamp is unknown. @end table The default value of @var{x} and @var{y} is 0. @item draw Draw the text only if the expression evaluates as non-zero. The expression accepts the same variables @var{x, y} do. The default value is 1. @item alpha Draw the text applying alpha blending. The value can be either a number between 0.0 and 1.0 The expression accepts the same variables @var{x, y} do. The default value is 1. @item fontsize The font size to be used for drawing text. The default value of @var{fontsize} is 16. @item fontcolor The color to be used for drawing fonts. It is either a string (e.g. "red"), or in 0xRRGGBB[AA] format (e.g. "0xff000033"), possibly followed by an alpha specifier. The default value of @var{fontcolor} is "black". @item boxcolor The color to be used for drawing box around text. It is either a string (e.g. "yellow") or in 0xRRGGBB[AA] format (e.g. "0xff00ff"), possibly followed by an alpha specifier. The default value of @var{boxcolor} is "white". @item box Used to draw a box around text using the background color. The value must be either 1 (enable) or 0 (disable). The default value of @var{box} is 0. @item shadowx, shadowy The x and y offsets for the text shadow position with respect to the position of the text. They can be either positive or negative values. The default value for both is "0". @item shadowcolor The color to be used for drawing a shadow behind the drawn text. It can be a color name (e.g. "yellow") or a string in the 0xRRGGBB[AA] form (e.g. "0xff00ff"), possibly followed by an alpha specifier. The default value of @var{shadowcolor} is "black". @item ft_load_flags The flags to be used for loading the fonts. The flags map the corresponding flags supported by libfreetype, and are a combination of the following values: @table @var @item default @item no_scale @item no_hinting @item render @item no_bitmap @item vertical_layout @item force_autohint @item crop_bitmap @item pedantic @item ignore_global_advance_width @item no_recurse @item ignore_transform @item monochrome @item linear_design @item no_autohint @item end table @end table Default value is "render". For more information consult the documentation for the FT_LOAD_* libfreetype flags. @item tabsize The size in number of spaces to use for rendering the tab. Default value is 4. @item fix_bounds If true, check and fix text coords to avoid clipping. @end table For example the command: @example drawtext="fontfile=/usr/share/fonts/truetype/freefont/FreeSerif.ttf: text='Test Text'" @end example will draw "Test Text" with font FreeSerif, using the default values for the optional parameters. The command: @example drawtext="fontfile=/usr/share/fonts/truetype/freefont/FreeSerif.ttf: text='Test Text':\ x=100: y=50: fontsize=24: fontcolor=yellow@@0.2: box=1: boxcolor=red@@0.2" @end example will draw 'Test Text' with font FreeSerif of size 24 at position x=100 and y=50 (counting from the top-left corner of the screen), text is yellow with a red box around it. Both the text and the box have an opacity of 20%. Note that the double quotes are not necessary if spaces are not used within the parameter list. For more information about libfreetype, check: @url{http://www.freetype.org/}. @section fade Apply a fade-in/out effect to the input video. It accepts the following parameters: @table @option @item type The effect type can be either "in" for a fade-in, or "out" for a fade-out effect. @item start_frame The number of the frame to start applying the fade effect at. @item nb_frames The number of frames that the fade effect lasts. At the end of the fade-in effect, the output video will have the same intensity as the input video. At the end of the fade-out transition, the output video will be completely black. @end table Some examples: @example # Fade in the first 30 frames of video fade=type=in:nb_frames=30 # Fade out the last 45 frames of a 200-frame video fade=type=out:start_frame=155:nb_frames=45 # Fade in the first 25 frames and fade out the last 25 frames of a 1000-frame video fade=type=in:start_frame=0:nb_frames=25, fade=type=out:start_frame=975:nb_frames=25 # Make the first 5 frames black, then fade in from frame 5-24 fade=type=in:start_frame=5:nb_frames=20 @end example @section fieldorder Transform the field order of the input video. It accepts the following parameters: @table @option @item order The output field order. Valid values are @var{tff} for top field first or @var{bff} for bottom field first. @end table The default value is "tff". The transformation is done by shifting the picture content up or down by one line, and filling the remaining line with appropriate picture content. This method is consistent with most broadcast field order converters. If the input video is not flagged as being interlaced, or it is already flagged as being of the required output field order, then this filter does not alter the incoming video. It is very useful when converting to or from PAL DV material, which is bottom field first. For example: @example ./avconv -i in.vob -vf "fieldorder=order=bff" out.dv @end example @section fifo Buffer input images and send them when they are requested. It is mainly useful when auto-inserted by the libavfilter framework. It does not take parameters. @section format Convert the input video to one of the specified pixel formats. Libavfilter will try to pick one that is suitable as input to the next filter. It accepts the following parameters: @table @option @item pix_fmts A '|'-separated list of pixel format names, such as "pix_fmts=yuv420p|monow|rgb24". @end table Some examples: @example # Convert the input video to the "yuv420p" format format=pix_fmts=yuv420p # Convert the input video to any of the formats in the list format=pix_fmts=yuv420p|yuv444p|yuv410p @end example @anchor{fps} @section fps Convert the video to specified constant framerate by duplicating or dropping frames as necessary. It accepts the following parameters: @table @option @item fps The desired output framerate. @item start_time Assume the first PTS should be the given value, in seconds. This allows for padding/trimming at the start of stream. By default, no assumption is made about the first frame's expected PTS, so no padding or trimming is done. For example, this could be set to 0 to pad the beginning with duplicates of the first frame if a video stream starts after the audio stream or to trim any frames with a negative PTS. @end table @section framepack Pack two different video streams into a stereoscopic video, setting proper metadata on supported codecs. The two views should have the same size and framerate and processing will stop when the shorter video ends. Please note that you may conveniently adjust view properties with the @ref{scale} and @ref{fps} filters. It accepts the following parameters: @table @option @item format The desired packing format. Supported values are: @table @option @item sbs The views are next to each other (default). @item tab The views are on top of each other. @item lines The views are packed by line. @item columns The views are packed by column. @item frameseq The views are temporally interleaved. @end table @end table Some examples: @example # Convert left and right views into a frame-sequential video avconv -i LEFT -i RIGHT -filter_complex framepack=frameseq OUTPUT # Convert views into a side-by-side video with the same output resolution as the input avconv -i LEFT -i RIGHT -filter_complex [0:v]scale=w=iw/2[left],[1:v]scale=w=iw/2[right],[left][right]framepack=sbs OUTPUT @end example @anchor{frei0r} @section frei0r Apply a frei0r effect to the input video. To enable the compilation of this filter, you need to install the frei0r header and configure Libav with --enable-frei0r. It accepts the following parameters: @table @option @item filter_name The name of the frei0r effect to load. If the environment variable @env{FREI0R_PATH} is defined, the frei0r effect is searched for in each of the directories specified by the colon-separated list in @env{FREIOR_PATH}. Otherwise, the standard frei0r paths are searched, in this order: @file{HOME/.frei0r-1/lib/}, @file{/usr/local/lib/frei0r-1/}, @file{/usr/lib/frei0r-1/}. @item filter_params A '|'-separated list of parameters to pass to the frei0r effect. @end table A frei0r effect parameter can be a boolean (its value is either "y" or "n"), a double, a color (specified as @var{R}/@var{G}/@var{B}, where @var{R}, @var{G}, and @var{B} are floating point numbers between 0.0 and 1.0, inclusive) or by an @code{av_parse_color()} color description), a position (specified as @var{X}/@var{Y}, where @var{X} and @var{Y} are floating point numbers) and/or a string. The number and types of parameters depend on the loaded effect. If an effect parameter is not specified, the default value is set. Some examples: @example # Apply the distort0r effect, setting the first two double parameters frei0r=filter_name=distort0r:filter_params=0.5|0.01 # Apply the colordistance effect, taking a color as the first parameter frei0r=colordistance:0.2/0.3/0.4 frei0r=colordistance:violet frei0r=colordistance:0x112233 # Apply the perspective effect, specifying the top left and top right # image positions frei0r=perspective:0.2/0.2|0.8/0.2 @end example For more information, see @url{http://piksel.org/frei0r} @section gradfun Fix the banding artifacts that are sometimes introduced into nearly flat regions by truncation to 8bit colordepth. Interpolate the gradients that should go where the bands are, and dither them. It is designed for playback only. Do not use it prior to lossy compression, because compression tends to lose the dither and bring back the bands. It accepts the following parameters: @table @option @item strength The maximum amount by which the filter will change any one pixel. This is also the threshold for detecting nearly flat regions. Acceptable values range from .51 to 64; the default value is 1.2. Out-of-range values will be clipped to the valid range. @item radius The neighborhood to fit the gradient to. A larger radius makes for smoother gradients, but also prevents the filter from modifying the pixels near detailed regions. Acceptable values are 8-32; the default value is 16. Out-of-range values will be clipped to the valid range. @end table @example # Default parameters gradfun=strength=1.2:radius=16 # Omitting the radius gradfun=1.2 @end example @section hflip Flip the input video horizontally. For example, to horizontally flip the input video with @command{avconv}: @example avconv -i in.avi -vf "hflip" out.avi @end example @section hqdn3d This is a high precision/quality 3d denoise filter. It aims to reduce image noise, producing smooth images and making still images really still. It should enhance compressibility. It accepts the following optional parameters: @table @option @item luma_spatial A non-negative floating point number which specifies spatial luma strength. It defaults to 4.0. @item chroma_spatial A non-negative floating point number which specifies spatial chroma strength. It defaults to 3.0*@var{luma_spatial}/4.0. @item luma_tmp A floating point number which specifies luma temporal strength. It defaults to 6.0*@var{luma_spatial}/4.0. @item chroma_tmp A floating point number which specifies chroma temporal strength. It defaults to @var{luma_tmp}*@var{chroma_spatial}/@var{luma_spatial}. @end table @section interlace Simple interlacing filter from progressive contents. This interleaves upper (or lower) lines from odd frames with lower (or upper) lines from even frames, halving the frame rate and preserving image height. @example Original Original New Frame Frame 'j' Frame 'j+1' (tff) ========== =========== ================== Line 0 --------------------> Frame 'j' Line 0 Line 1 Line 1 ----> Frame 'j+1' Line 1 Line 2 ---------------------> Frame 'j' Line 2 Line 3 Line 3 ----> Frame 'j+1' Line 3 ... ... ... New Frame + 1 will be generated by Frame 'j+2' and Frame 'j+3' and so on @end example It accepts the following optional parameters: @table @option @item scan This determines whether the interlaced frame is taken from the even (tff - default) or odd (bff) lines of the progressive frame. @item lowpass Enable (default) or disable the vertical lowpass filter to avoid twitter interlacing and reduce moire patterns. @end table @section lut, lutrgb, lutyuv Compute a look-up table for binding each pixel component input value to an output value, and apply it to the input video. @var{lutyuv} applies a lookup table to a YUV input video, @var{lutrgb} to an RGB input video. These filters accept the following parameters: @table @option @item @var{c0} (first pixel component) @item @var{c1} (second pixel component) @item @var{c2} (third pixel component) @item @var{c3} (fourth pixel component, corresponds to the alpha component) @item @var{r} (red component) @item @var{g} (green component) @item @var{b} (blue component) @item @var{a} (alpha component) @item @var{y} (Y/luminance component) @item @var{u} (U/Cb component) @item @var{v} (V/Cr component) @end table Each of them specifies the expression to use for computing the lookup table for the corresponding pixel component values. The exact component associated to each of the @var{c*} options depends on the format in input. The @var{lut} filter requires either YUV or RGB pixel formats in input, @var{lutrgb} requires RGB pixel formats in input, and @var{lutyuv} requires YUV. The expressions can contain the following constants and functions: @table @option @item E, PI, PHI These are approximated values for the mathematical constants e (Euler's number), pi (Greek pi), and phi (the golden ratio). @item w, h The input width and height. @item val The input value for the pixel component. @item clipval The input value, clipped to the @var{minval}-@var{maxval} range. @item maxval The maximum value for the pixel component. @item minval The minimum value for the pixel component. @item negval The negated value for the pixel component value, clipped to the @var{minval}-@var{maxval} range; it corresponds to the expression "maxval-clipval+minval". @item clip(val) The computed value in @var{val}, clipped to the @var{minval}-@var{maxval} range. @item gammaval(gamma) The computed gamma correction value of the pixel component value, clipped to the @var{minval}-@var{maxval} range. It corresponds to the expression "pow((clipval-minval)/(maxval-minval)\,@var{gamma})*(maxval-minval)+minval" @end table All expressions default to "val". Some examples: @example # Negate input video lutrgb="r=maxval+minval-val:g=maxval+minval-val:b=maxval+minval-val" lutyuv="y=maxval+minval-val:u=maxval+minval-val:v=maxval+minval-val" # The above is the same as lutrgb="r=negval:g=negval:b=negval" lutyuv="y=negval:u=negval:v=negval" # Negate luminance lutyuv=negval # Remove chroma components, turning the video into a graytone image lutyuv="u=128:v=128" # Apply a luma burning effect lutyuv="y=2*val" # Remove green and blue components lutrgb="g=0:b=0" # Set a constant alpha channel value on input format=rgba,lutrgb=a="maxval-minval/2" # Correct luminance gamma by a factor of 0.5 lutyuv=y=gammaval(0.5) @end example @section negate Negate input video. It accepts an integer in input; if non-zero it negates the alpha component (if available). The default value in input is 0. @section noformat Force libavfilter not to use any of the specified pixel formats for the input to the next filter. It accepts the following parameters: @table @option @item pix_fmts A '|'-separated list of pixel format names, such as apix_fmts=yuv420p|monow|rgb24". @end table Some examples: @example # Force libavfilter to use a format different from "yuv420p" for the # input to the vflip filter noformat=pix_fmts=yuv420p,vflip # Convert the input video to any of the formats not contained in the list noformat=yuv420p|yuv444p|yuv410p @end example @section null Pass the video source unchanged to the output. @section ocv Apply a video transform using libopencv. To enable this filter, install the libopencv library and headers and configure Libav with --enable-libopencv. It accepts the following parameters: @table @option @item filter_name The name of the libopencv filter to apply. @item filter_params The parameters to pass to the libopencv filter. If not specified, the default values are assumed. @end table Refer to the official libopencv documentation for more precise information: @url{http://opencv.willowgarage.com/documentation/c/image_filtering.html} Several libopencv filters are supported; see the following subsections. @anchor{dilate} @subsection dilate Dilate an image by using a specific structuring element. It corresponds to the libopencv function @code{cvDilate}. It accepts the parameters: @var{struct_el}|@var{nb_iterations}. @var{struct_el} represents a structuring element, and has the syntax: @var{cols}x@var{rows}+@var{anchor_x}x@var{anchor_y}/@var{shape} @var{cols} and @var{rows} represent the number of columns and rows of the structuring element, @var{anchor_x} and @var{anchor_y} the anchor point, and @var{shape} the shape for the structuring element. @var{shape} must be "rect", "cross", "ellipse", or "custom". If the value for @var{shape} is "custom", it must be followed by a string of the form "=@var{filename}". The file with name @var{filename} is assumed to represent a binary image, with each printable character corresponding to a bright pixel. When a custom @var{shape} is used, @var{cols} and @var{rows} are ignored, the number or columns and rows of the read file are assumed instead. The default value for @var{struct_el} is "3x3+0x0/rect". @var{nb_iterations} specifies the number of times the transform is applied to the image, and defaults to 1. Some examples: @example # Use the default values ocv=dilate # Dilate using a structuring element with a 5x5 cross, iterating two times ocv=filter_name=dilate:filter_params=5x5+2x2/cross|2 # Read the shape from the file diamond.shape, iterating two times. # The file diamond.shape may contain a pattern of characters like this # * # *** # ***** # *** # * # The specified columns and rows are ignored # but the anchor point coordinates are not ocv=dilate:0x0+2x2/custom=diamond.shape|2 @end example @subsection erode Erode an image by using a specific structuring element. It corresponds to the libopencv function @code{cvErode}. It accepts the parameters: @var{struct_el}:@var{nb_iterations}, with the same syntax and semantics as the @ref{dilate} filter. @subsection smooth Smooth the input video. The filter takes the following parameters: @var{type}|@var{param1}|@var{param2}|@var{param3}|@var{param4}. @var{type} is the type of smooth filter to apply, and must be one of the following values: "blur", "blur_no_scale", "median", "gaussian", or "bilateral". The default value is "gaussian". The meaning of @var{param1}, @var{param2}, @var{param3}, and @var{param4} depend on the smooth type. @var{param1} and @var{param2} accept integer positive values or 0. @var{param3} and @var{param4} accept floating point values. The default value for @var{param1} is 3. The default value for the other parameters is 0. These parameters correspond to the parameters assigned to the libopencv function @code{cvSmooth}. @anchor{overlay} @section overlay Overlay one video on top of another. It takes two inputs and has one output. The first input is the "main" video on which the second input is overlayed. It accepts the following parameters: @table @option @item x The horizontal position of the left edge of the overlaid video on the main video. @item y The vertical position of the top edge of the overlaid video on the main video. @end table The parameters are expressions containing the following parameters: @table @option @item main_w, main_h The main input width and height. @item W, H These are the same as @var{main_w} and @var{main_h}. @item overlay_w, overlay_h The overlay input width and height. @item w, h These are the same as @var{overlay_w} and @var{overlay_h}. @item eof_action The action to take when EOF is encountered on the secondary input; it accepts one of the following values: @table @option @item repeat Repeat the last frame (the default). @item endall End both streams. @item pass Pass the main input through. @end table @end table Be aware that frames are taken from each input video in timestamp order, hence, if their initial timestamps differ, it is a a good idea to pass the two inputs through a @var{setpts=PTS-STARTPTS} filter to have them begin in the same zero timestamp, as the example for the @var{movie} filter does. Some examples: @example # Draw the overlay at 10 pixels from the bottom right # corner of the main video overlay=x=main_w-overlay_w-10:y=main_h-overlay_h-10 # Insert a transparent PNG logo in the bottom left corner of the input avconv -i input -i logo -filter_complex 'overlay=x=10:y=main_h-overlay_h-10' output # Insert 2 different transparent PNG logos (second logo on bottom # right corner) avconv -i input -i logo1 -i logo2 -filter_complex 'overlay=x=10:y=H-h-10,overlay=x=W-w-10:y=H-h-10' output # Add a transparent color layer on top of the main video; # WxH specifies the size of the main input to the overlay filter color=red@.3:WxH [over]; [in][over] overlay [out] # Mask 10-20 seconds of a video by applying the delogo filter to a section avconv -i test.avi -codec:v:0 wmv2 -ar 11025 -b:v 9000k -vf '[in]split[split_main][split_delogo];[split_delogo]trim=start=360:end=371,delogo=0:0:640:480[delogoed];[split_main][delogoed]overlay=eof_action=pass[out]' masked.avi @end example You can chain together more overlays but the efficiency of such approach is yet to be tested. @section pad Add paddings to the input image, and place the original input at the provided @var{x}, @var{y} coordinates. It accepts the following parameters: @table @option @item width, height Specify the size of the output image with the paddings added. If the value for @var{width} or @var{height} is 0, the corresponding input size is used for the output. The @var{width} expression can reference the value set by the @var{height} expression, and vice versa. The default value of @var{width} and @var{height} is 0. @item x, y Specify the offsets to place the input image at within the padded area, with respect to the top/left border of the output image. The @var{x} expression can reference the value set by the @var{y} expression, and vice versa. The default value of @var{x} and @var{y} is 0. @item color Specify the color of the padded area. It can be the name of a color (case insensitive match) or an 0xRRGGBB[AA] sequence. The default value of @var{color} is "black". @end table The parameters @var{width}, @var{height}, @var{x}, and @var{y} are expressions containing the following constants: @table @option @item E, PI, PHI These are approximated values for the mathematical constants e (Euler's number), pi (Greek pi), and phi (the golden ratio). @item in_w, in_h The input video width and height. @item iw, ih These are the same as @var{in_w} and @var{in_h}. @item out_w, out_h The output width and height (the size of the padded area), as specified by the @var{width} and @var{height} expressions. @item ow, oh These are the same as @var{out_w} and @var{out_h}. @item x, y The x and y offsets as specified by the @var{x} and @var{y} expressions, or NAN if not yet specified. @item a The input display aspect ratio, same as @var{iw} / @var{ih}. @item hsub, vsub The horizontal and vertical chroma subsample values. For example for the pixel format "yuv422p" @var{hsub} is 2 and @var{vsub} is 1. @end table Some examples: @example # Add paddings with the color "violet" to the input video. The output video # size is 640x480, and the top-left corner of the input video is placed at # column 0, row 40 pad=width=640:height=480:x=0:y=40:color=violet # Pad the input to get an output with dimensions increased by 3/2, # and put the input video at the center of the padded area pad="3/2*iw:3/2*ih:(ow-iw)/2:(oh-ih)/2" # Pad the input to get a squared output with size equal to the maximum # value between the input width and height, and put the input video at # the center of the padded area pad="max(iw\,ih):ow:(ow-iw)/2:(oh-ih)/2" # Pad the input to get a final w/h ratio of 16:9 pad="ih*16/9:ih:(ow-iw)/2:(oh-ih)/2" # Double the output size and put the input video in the bottom-right # corner of the output padded area pad="2*iw:2*ih:ow-iw:oh-ih" @end example @section pixdesctest Pixel format descriptor test filter, mainly useful for internal testing. The output video should be equal to the input video. For example: @example format=monow, pixdesctest @end example can be used to test the monowhite pixel format descriptor definition. @anchor{scale} @section scale Scale the input video and/or convert the image format. It accepts the following parameters: @table @option @item w The output video width. @item h The output video height. @end table The parameters @var{w} and @var{h} are expressions containing the following constants: @table @option @item E, PI, PHI These are approximated values for the mathematical constants e (Euler's number), pi (Greek pi), and phi (the golden ratio). @item in_w, in_h The input width and height. @item iw, ih These are the same as @var{in_w} and @var{in_h}. @item out_w, out_h The output (cropped) width and height. @item ow, oh These are the same as @var{out_w} and @var{out_h}. @item a This is the same as @var{iw} / @var{ih}. @item sar input sample aspect ratio @item dar The input display aspect ratio; it is the same as (@var{iw} / @var{ih}) * @var{sar}. @item hsub, vsub The horizontal and vertical chroma subsample values. For example, for the pixel format "yuv422p" @var{hsub} is 2 and @var{vsub} is 1. @end table If the input image format is different from the format requested by the next filter, the scale filter will convert the input to the requested format. If the value for @var{w} or @var{h} is 0, the respective input size is used for the output. If the value for @var{w} or @var{h} is -1, the scale filter will use, for the respective output size, a value that maintains the aspect ratio of the input image. The default value of @var{w} and @var{h} is 0. Some examples: @example # Scale the input video to a size of 200x100 scale=w=200:h=100 # Scale the input to 2x scale=w=2*iw:h=2*ih # The above is the same as scale=2*in_w:2*in_h # Scale the input to half the original size scale=w=iw/2:h=ih/2 # Increase the width, and set the height to the same size scale=3/2*iw:ow # Seek Greek harmony scale=iw:1/PHI*iw scale=ih*PHI:ih # Increase the height, and set the width to 3/2 of the height scale=w=3/2*oh:h=3/5*ih # Increase the size, making the size a multiple of the chroma scale="trunc(3/2*iw/hsub)*hsub:trunc(3/2*ih/vsub)*vsub" # Increase the width to a maximum of 500 pixels, # keeping the same aspect ratio as the input scale=w='min(500\, iw*3/2):h=-1' @end example @section select Select frames to pass in output. It accepts the following parameters: @table @option @item expr An expression, which is evaluated for each input frame. If the expression is evaluated to a non-zero value, the frame is selected and passed to the output, otherwise it is discarded. @end table The expression can contain the following constants: @table @option @item E, PI, PHI These are approximated values for the mathematical constants e (Euler's number), pi (Greek pi), and phi (the golden ratio). @item n The (sequential) number of the filtered frame, starting from 0. @item selected_n The (sequential) number of the selected frame, starting from 0. @item prev_selected_n The sequential number of the last selected frame. It's NAN if undefined. @item TB The timebase of the input timestamps. @item pts The PTS (Presentation TimeStamp) of the filtered video frame, expressed in @var{TB} units. It's NAN if undefined. @item t The PTS of the filtered video frame, expressed in seconds. It's NAN if undefined. @item prev_pts The PTS of the previously filtered video frame. It's NAN if undefined. @item prev_selected_pts The PTS of the last previously filtered video frame. It's NAN if undefined. @item prev_selected_t The PTS of the last previously selected video frame. It's NAN if undefined. @item start_pts The PTS of the first video frame in the video. It's NAN if undefined. @item start_t The time of the first video frame in the video. It's NAN if undefined. @item pict_type The type of the filtered frame. It can assume one of the following values: @table @option @item I @item P @item B @item S @item SI @item SP @item BI @end table @item interlace_type The frame interlace type. It can assume one of the following values: @table @option @item PROGRESSIVE The frame is progressive (not interlaced). @item TOPFIRST The frame is top-field-first. @item BOTTOMFIRST The frame is bottom-field-first. @end table @item key This is 1 if the filtered frame is a key-frame, 0 otherwise. @end table The default value of the select expression is "1". Some examples: @example # Select all the frames in input select # The above is the same as select=expr=1 # Skip all frames select=expr=0 # Select only I-frames select='expr=eq(pict_type\,I)' # Select one frame per 100 select='not(mod(n\,100))' # Select only frames contained in the 10-20 time interval select='gte(t\,10)*lte(t\,20)' # Select only I frames contained in the 10-20 time interval select='gte(t\,10)*lte(t\,20)*eq(pict_type\,I)' # Select frames with a minimum distance of 10 seconds select='isnan(prev_selected_t)+gte(t-prev_selected_t\,10)' @end example @anchor{setdar} @section setdar Set the Display Aspect Ratio for the filter output video. This is done by changing the specified Sample (aka Pixel) Aspect Ratio, according to the following equation: @math{DAR = HORIZONTAL_RESOLUTION / VERTICAL_RESOLUTION * SAR} Keep in mind that this filter does not modify the pixel dimensions of the video frame. Also, the display aspect ratio set by this filter may be changed by later filters in the filterchain, e.g. in case of scaling or if another "setdar" or a "setsar" filter is applied. It accepts the following parameters: @table @option @item dar The output display aspect ratio. @end table The parameter @var{dar} is an expression containing the following constants: @table @option @item E, PI, PHI These are approximated values for the mathematical constants e (Euler's number), pi (Greek pi), and phi (the golden ratio). @item w, h The input width and height. @item a This is the same as @var{w} / @var{h}. @item sar The input sample aspect ratio. @item dar The input display aspect ratio. It is the same as (@var{w} / @var{h}) * @var{sar}. @item hsub, vsub The horizontal and vertical chroma subsample values. For example, for the pixel format "yuv422p" @var{hsub} is 2 and @var{vsub} is 1. @end table To change the display aspect ratio to 16:9, specify: @example setdar=dar=16/9 # The above is equivalent to setdar=dar=1.77777 @end example Also see the the @ref{setsar} filter documentation. @section setpts Change the PTS (presentation timestamp) of the input video frames. It accepts the following parameters: @table @option @item expr The expression which is evaluated for each frame to construct its timestamp. @end table The expression is evaluated through the eval API and can contain the following constants: @table @option @item PTS The presentation timestamp in input. @item E, PI, PHI These are approximated values for the mathematical constants e (Euler's number), pi (Greek pi), and phi (the golden ratio). @item N The count of the input frame, starting from 0. @item STARTPTS The PTS of the first video frame. @item INTERLACED State whether the current frame is interlaced. @item PREV_INPTS The previous input PTS. @item PREV_OUTPTS The previous output PTS. @item RTCTIME The wallclock (RTC) time in microseconds. @item RTCSTART The wallclock (RTC) time at the start of the movie in microseconds. @item TB The timebase of the input timestamps. @end table Some examples: @example # Start counting the PTS from zero setpts=expr=PTS-STARTPTS # Fast motion setpts=expr=0.5*PTS # Slow motion setpts=2.0*PTS # Fixed rate 25 fps setpts=N/(25*TB) # Fixed rate 25 fps with some jitter setpts='1/(25*TB) * (N + 0.05 * sin(N*2*PI/25))' # Generate timestamps from a "live source" and rebase onto the current timebase setpts='(RTCTIME - RTCSTART) / (TB * 1000000)" @end example @anchor{setsar} @section setsar Set the Sample (aka Pixel) Aspect Ratio for the filter output video. Note that as a consequence of the application of this filter, the output display aspect ratio will change according to the following equation: @math{DAR = HORIZONTAL_RESOLUTION / VERTICAL_RESOLUTION * SAR} Keep in mind that the sample aspect ratio set by this filter may be changed by later filters in the filterchain, e.g. if another "setsar" or a "setdar" filter is applied. It accepts the following parameters: @table @option @item sar The output sample aspect ratio. @end table The parameter @var{sar} is an expression containing the following constants: @table @option @item E, PI, PHI These are approximated values for the mathematical constants e (Euler's number), pi (Greek pi), and phi (the golden ratio). @item w, h The input width and height. @item a These are the same as @var{w} / @var{h}. @item sar The input sample aspect ratio. @item dar The input display aspect ratio. It is the same as (@var{w} / @var{h}) * @var{sar}. @item hsub, vsub Horizontal and vertical chroma subsample values. For example, for the pixel format "yuv422p" @var{hsub} is 2 and @var{vsub} is 1. @end table To change the sample aspect ratio to 10:11, specify: @example setsar=sar=10/11 @end example @section settb Set the timebase to use for the output frames timestamps. It is mainly useful for testing timebase configuration. It accepts the following parameters: @table @option @item expr The expression which is evaluated into the output timebase. @end table The expression can contain the constants "PI", "E", "PHI", "AVTB" (the default timebase), and "intb" (the input timebase). The default value for the input is "intb". Some examples: @example # Set the timebase to 1/25 settb=expr=1/25 # Set the timebase to 1/10 settb=expr=0.1 # Set the timebase to 1001/1000 settb=1+0.001 #Set the timebase to 2*intb settb=2*intb #Set the default timebase value settb=AVTB @end example @section showinfo Show a line containing various information for each input video frame. The input video is not modified. The shown line contains a sequence of key/value pairs of the form @var{key}:@var{value}. It accepts the following parameters: @table @option @item n The (sequential) number of the input frame, starting from 0. @item pts The Presentation TimeStamp of the input frame, expressed as a number of time base units. The time base unit depends on the filter input pad. @item pts_time The Presentation TimeStamp of the input frame, expressed as a number of seconds. @item pos The position of the frame in the input stream, or -1 if this information is unavailable and/or meaningless (for example in case of synthetic video). @item fmt The pixel format name. @item sar The sample aspect ratio of the input frame, expressed in the form @var{num}/@var{den}. @item s The size of the input frame, expressed in the form @var{width}x@var{height}. @item i The type of interlaced mode ("P" for "progressive", "T" for top field first, "B" for bottom field first). @item iskey This is 1 if the frame is a key frame, 0 otherwise. @item type The picture type of the input frame ("I" for an I-frame, "P" for a P-frame, "B" for a B-frame, or "?" for an unknown type). Also refer to the documentation of the @code{AVPictureType} enum and of the @code{av_get_picture_type_char} function defined in @file{libavutil/avutil.h}. @item checksum The Adler-32 checksum of all the planes of the input frame. @item plane_checksum The Adler-32 checksum of each plane of the input frame, expressed in the form "[@var{c0} @var{c1} @var{c2} @var{c3}]". @end table @section shuffleplanes Reorder and/or duplicate video planes. It accepts the following parameters: @table @option @item map0 The index of the input plane to be used as the first output plane. @item map1 The index of the input plane to be used as the second output plane. @item map2 The index of the input plane to be used as the third output plane. @item map3 The index of the input plane to be used as the fourth output plane. @end table The first plane has the index 0. The default is to keep the input unchanged. Swap the second and third planes of the input: @example avconv -i INPUT -vf shuffleplanes=0:2:1:3 OUTPUT @end example @section split Split input video into several identical outputs. It accepts a single parameter, which specifies the number of outputs. If unspecified, it defaults to 2. Create 5 copies of the input video: @example avconv -i INPUT -filter_complex split=5 OUTPUT @end example @section transpose Transpose rows with columns in the input video and optionally flip it. It accepts the following parameters: @table @option @item dir The direction of the transpose. @end table The direction can assume the following values: @table @samp @item cclock_flip Rotate by 90 degrees counterclockwise and vertically flip (default), that is: @example L.R L.l . . -> . . l.r R.r @end example @item clock Rotate by 90 degrees clockwise, that is: @example L.R l.L . . -> . . l.r r.R @end example @item cclock Rotate by 90 degrees counterclockwise, that is: @example L.R R.r . . -> . . l.r L.l @end example @item clock_flip Rotate by 90 degrees clockwise and vertically flip, that is: @example L.R r.R . . -> . . l.r l.L @end example @end table @section trim Trim the input so that the output contains one continuous subpart of the input. It accepts the following parameters: @table @option @item start The timestamp (in seconds) of the start of the kept section. The frame with the timestamp @var{start} will be the first frame in the output. @item end The timestamp (in seconds) of the first frame that will be dropped. The frame immediately preceding the one with the timestamp @var{end} will be the last frame in the output. @item start_pts This is the same as @var{start}, except this option sets the start timestamp in timebase units instead of seconds. @item end_pts This is the same as @var{end}, except this option sets the end timestamp in timebase units instead of seconds. @item duration The maximum duration of the output in seconds. @item start_frame The number of the first frame that should be passed to the output. @item end_frame The number of the first frame that should be dropped. @end table Note that the first two sets of the start/end options and the @option{duration} option look at the frame timestamp, while the _frame variants simply count the frames that pass through the filter. Also note that this filter does not modify the timestamps. If you wish for the output timestamps to start at zero, insert a setpts filter after the trim filter. If multiple start or end options are set, this filter tries to be greedy and keep all the frames that match at least one of the specified constraints. To keep only the part that matches all the constraints at once, chain multiple trim filters. The defaults are such that all the input is kept. So it is possible to set e.g. just the end values to keep everything before the specified time. Examples: @itemize @item Drop everything except the second minute of input: @example avconv -i INPUT -vf trim=60:120 @end example @item Keep only the first second: @example avconv -i INPUT -vf trim=duration=1 @end example @end itemize @section unsharp Sharpen or blur the input video. It accepts the following parameters: @table @option @item luma_msize_x Set the luma matrix horizontal size. It must be an integer between 3 and 13. The default value is 5. @item luma_msize_y Set the luma matrix vertical size. It must be an integer between 3 and 13. The default value is 5. @item luma_amount Set the luma effect strength. It must be a floating point number between -2.0 and 5.0. The default value is 1.0. @item chroma_msize_x Set the chroma matrix horizontal size. It must be an integer between 3 and 13. The default value is 5. @item chroma_msize_y Set the chroma matrix vertical size. It must be an integer between 3 and 13. The default value is 5. @item chroma_amount Set the chroma effect strength. It must be a floating point number between -2.0 and 5.0. The default value is 0.0. @end table Negative values for the amount will blur the input video, while positive values will sharpen. All parameters are optional and default to the equivalent of the string '5:5:1.0:5:5:0.0'. @example # Strong luma sharpen effect parameters unsharp=luma_msize_x=7:luma_msize_y=7:luma_amount=2.5 # A strong blur of both luma and chroma parameters unsharp=7:7:-2:7:7:-2 # Use the default values with @command{avconv} ./avconv -i in.avi -vf "unsharp" out.mp4 @end example @section vflip Flip the input video vertically. @example ./avconv -i in.avi -vf "vflip" out.avi @end example @section yadif Deinterlace the input video ("yadif" means "yet another deinterlacing filter"). It accepts the following parameters: @table @option @item mode The interlacing mode to adopt. It accepts one of the following values: @table @option @item 0 Output one frame for each frame. @item 1 Output one frame for each field. @item 2 Like 0, but it skips the spatial interlacing check. @item 3 Like 1, but it skips the spatial interlacing check. @end table The default value is 0. @item parity The picture field parity assumed for the input interlaced video. It accepts one of the following values: @table @option @item 0 Assume the top field is first. @item 1 Assume the bottom field is first. @item -1 Enable automatic detection of field parity. @end table The default value is -1. If the interlacing is unknown or the decoder does not export this information, top field first will be assumed. @item auto Whether the deinterlacer should trust the interlaced flag and only deinterlace frames marked as interlaced. @table @option @item 0 Deinterlace all frames. @item 1 Only deinterlace frames marked as interlaced. @end table The default value is 0. @end table @c man end VIDEO FILTERS @chapter Video Sources @c man begin VIDEO SOURCES Below is a description of the currently available video sources. @section buffer Buffer video frames, and make them available to the filter chain. This source is mainly intended for a programmatic use, in particular through the interface defined in @file{libavfilter/vsrc_buffer.h}. It accepts the following parameters: @table @option @item width The input video width. @item height The input video height. @item pix_fmt The name of the input video pixel format. @item time_base The time base used for input timestamps. @item sar The sample (pixel) aspect ratio of the input video. @end table For example: @example buffer=width=320:height=240:pix_fmt=yuv410p:time_base=1/24:sar=1 @end example will instruct the source to accept video frames with size 320x240 and with format "yuv410p", assuming 1/24 as the timestamps timebase and square pixels (1:1 sample aspect ratio). @section color Provide an uniformly colored input. It accepts the following parameters: @table @option @item color Specify the color of the source. It can be the name of a color (case insensitive match) or a 0xRRGGBB[AA] sequence, possibly followed by an alpha specifier. The default value is "black". @item size Specify the size of the sourced video, it may be a string of the form @var{width}x@var{height}, or the name of a size abbreviation. The default value is "320x240". @item framerate Specify the frame rate of the sourced video, as the number of frames generated per second. It has to be a string in the format @var{frame_rate_num}/@var{frame_rate_den}, an integer number, a floating point number or a valid video frame rate abbreviation. The default value is "25". @end table The following graph description will generate a red source with an opacity of 0.2, with size "qcif" and a frame rate of 10 frames per second, which will be overlayed over the source connected to the pad with identifier "in": @example "color=red@@0.2:qcif:10 [color]; [in][color] overlay [out]" @end example @section movie Read a video stream from a movie container. Note that this source is a hack that bypasses the standard input path. It can be useful in applications that do not support arbitrary filter graphs, but its use is discouraged in those that do. It should never be used with @command{avconv}; the @option{-filter_complex} option fully replaces it. It accepts the following parameters: @table @option @item filename The name of the resource to read (not necessarily a file; it can also be a device or a stream accessed through some protocol). @item format_name, f Specifies the format assumed for the movie to read, and can be either the name of a container or an input device. If not specified, the format is guessed from @var{movie_name} or by probing. @item seek_point, sp Specifies the seek point in seconds. The frames will be output starting from this seek point. The parameter is evaluated with @code{av_strtod}, so the numerical value may be suffixed by an IS postfix. The default value is "0". @item stream_index, si Specifies the index of the video stream to read. If the value is -1, the most suitable video stream will be automatically selected. The default value is "-1". @end table It allows overlaying a second video on top of the main input of a filtergraph, as shown in this graph: @example input -----------> deltapts0 --> overlay --> output ^ | movie --> scale--> deltapts1 -------+ @end example Some examples: @example # Skip 3.2 seconds from the start of the AVI file in.avi, and overlay it # on top of the input labelled "in" movie=in.avi:seek_point=3.2, scale=180:-1, setpts=PTS-STARTPTS [movie]; [in] setpts=PTS-STARTPTS, [movie] overlay=16:16 [out] # Read from a video4linux2 device, and overlay it on top of the input # labelled "in" movie=/dev/video0:f=video4linux2, scale=180:-1, setpts=PTS-STARTPTS [movie]; [in] setpts=PTS-STARTPTS, [movie] overlay=16:16 [out] @end example @section nullsrc Null video source: never return images. It is mainly useful as a template and to be employed in analysis / debugging tools. It accepts a string of the form @var{width}:@var{height}:@var{timebase} as an optional parameter. @var{width} and @var{height} specify the size of the configured source. The default values of @var{width} and @var{height} are respectively 352 and 288 (corresponding to the CIF size format). @var{timebase} specifies an arithmetic expression representing a timebase. The expression can contain the constants "PI", "E", "PHI", and "AVTB" (the default timebase), and defaults to the value "AVTB". @section frei0r_src Provide a frei0r source. To enable compilation of this filter you need to install the frei0r header and configure Libav with --enable-frei0r. This source accepts the following parameters: @table @option @item size The size of the video to generate. It may be a string of the form @var{width}x@var{height} or a frame size abbreviation. @item framerate The framerate of the generated video. It may be a string of the form @var{num}/@var{den} or a frame rate abbreviation. @item filter_name The name to the frei0r source to load. For more information regarding frei0r and how to set the parameters, read the @ref{frei0r} section in the video filters documentation. @item filter_params A '|'-separated list of parameters to pass to the frei0r source. @end table An example: @example # Generate a frei0r partik0l source with size 200x200 and framerate 10 # which is overlayed on the overlay filter main input frei0r_src=size=200x200:framerate=10:filter_name=partik0l:filter_params=1234 [overlay]; [in][overlay] overlay @end example @section rgbtestsrc, testsrc The @code{rgbtestsrc} source generates an RGB test pattern useful for detecting RGB vs BGR issues. You should see a red, green and blue stripe from top to bottom. The @code{testsrc} source generates a test video pattern, showing a color pattern, a scrolling gradient and a timestamp. This is mainly intended for testing purposes. The sources accept the following parameters: @table @option @item size, s Specify the size of the sourced video, it may be a string of the form @var{width}x@var{height}, or the name of a size abbreviation. The default value is "320x240". @item rate, r Specify the frame rate of the sourced video, as the number of frames generated per second. It has to be a string in the format @var{frame_rate_num}/@var{frame_rate_den}, an integer number, a floating point number or a valid video frame rate abbreviation. The default value is "25". @item sar Set the sample aspect ratio of the sourced video. @item duration Set the video duration of the sourced video. The accepted syntax is: @example [-]HH[:MM[:SS[.m...]]] [-]S+[.m...] @end example Also see the the @code{av_parse_time()} function. If not specified, or the expressed duration is negative, the video is supposed to be generated forever. @end table For example the following: @example testsrc=duration=5.3:size=qcif:rate=10 @end example will generate a video with a duration of 5.3 seconds, with size 176x144 and a framerate of 10 frames per second. @c man end VIDEO SOURCES @chapter Video Sinks @c man begin VIDEO SINKS Below is a description of the currently available video sinks. @section buffersink Buffer video frames, and make them available to the end of the filter graph. This sink is intended for programmatic use through the interface defined in @file{libavfilter/buffersink.h}. @section nullsink Null video sink: do absolutely nothing with the input video. It is mainly useful as a template and for use in analysis / debugging tools. @c man end VIDEO SINKS