From dc7ad85c401a0137795e0414f5fe1c2e7f1d7078 Mon Sep 17 00:00:00 2001 From: Clément Bœsch Date: Mon, 2 Jan 2012 15:32:55 +0100 Subject: doc: use @command{} for commands. --- doc/encoders.texi | 2 +- doc/ffprobe.texi | 2 +- doc/filters.texi | 2 +- doc/indevs.texi | 24 ++++++++++++------------ doc/libavfilter.texi | 14 +++++++------- doc/outdevs.texi | 2 +- doc/protocols.texi | 14 +++++++------- 7 files changed, 30 insertions(+), 30 deletions(-) (limited to 'doc') diff --git a/doc/encoders.texi b/doc/encoders.texi index f132eae892..65841eda7f 100644 --- a/doc/encoders.texi +++ b/doc/encoders.texi @@ -577,7 +577,7 @@ Allow to set any x264 option, see x264 --fullhelp for a list. ":". @end table -For example to specify libx264 encoding options with @file{ffmpeg}: +For example to specify libx264 encoding options with @command{ffmpeg}: @example ffmpeg -i foo.mpg -vcodec libx264 -x264opts keyint=123:min-keyint=20 -an out.mkv @end example diff --git a/doc/ffprobe.texi b/doc/ffprobe.texi index 002f91e9a7..2a9b73f7cd 100644 --- a/doc/ffprobe.texi +++ b/doc/ffprobe.texi @@ -135,7 +135,7 @@ Read @var{input_file}. @chapter Writers @c man begin WRITERS -A writer defines the output format adopted by @file{ffprobe}, and will be +A writer defines the output format adopted by @command{ffprobe}, and will be used for printing all the parts of the output. A writer may accept one or more arguments, which specify the options to diff --git a/doc/filters.texi b/doc/filters.texi index 86cacb3c2c..de73e3f289 100644 --- a/doc/filters.texi +++ b/doc/filters.texi @@ -354,7 +354,7 @@ A customized down-mix to stereo that works automatically for 3-, 4-, 5- and pan=stereo: FL < FL + 0.5*FC + 0.6*BL + 0.6*SL : FR < FR + 0.5*FC + 0.6*BR + 0.6*SR @end example -Note that @file{ffmpeg} integrates a default down-mix (and up-mix) system +Note that @command{ffmpeg} integrates a default down-mix (and up-mix) system that should be preferred (see "-ac" option) unless you have very specific needs. diff --git a/doc/indevs.texi b/doc/indevs.texi index 561b92bb3b..038d253da0 100644 --- a/doc/indevs.texi +++ b/doc/indevs.texi @@ -196,12 +196,12 @@ device. Once you have created one or more JACK readable clients, you need to connect them to one or more JACK writable clients. -To connect or disconnect JACK clients you can use the -@file{jack_connect} and @file{jack_disconnect} programs, or do it -through a graphical interface, for example with @file{qjackctl}. +To connect or disconnect JACK clients you can use the @command{jack_connect} +and @command{jack_disconnect} programs, or do it through a graphical interface, +for example with @command{qjackctl}. To list the JACK clients and their properties you can invoke the command -@file{jack_lsp}. +@command{jack_lsp}. Follows an example which shows how to capture a JACK readable client with @command{ffmpeg}. @@ -260,7 +260,7 @@ device. @itemize @item -Create a color video stream and play it back with @file{ffplay}: +Create a color video stream and play it back with @command{ffplay}: @example ffplay -f lavfi -graph "color=pink [out0]" dummy @end example @@ -280,14 +280,14 @@ ffplay -f lavfi -graph "testsrc [out0]; testsrc,hflip [out1]; testsrc,negate [ou @item Read an audio stream from a file using the amovie source and play it -back with @file{ffplay}: +back with @command{ffplay}: @example ffplay -f lavfi "amovie=test.wav" @end example @item Read an audio stream and a video stream and play it back with -@file{ffplay}: +@command{ffplay}: @example ffplay -f lavfi "movie=test.avi[out0];amovie=test.wav[out1]" @end example @@ -380,7 +380,7 @@ $ ffmpeg -f openal -i '' out.ogg @end example Capture from two devices simultaneously, writing to two different files, -within the same @file{ffmpeg} command: +within the same @command{ffmpeg} command: @example $ ffmpeg -f openal -i 'DR-BT101 via PulseAudio' out1.ogg -f openal -i 'ALSA Default' out2.ogg @end example @@ -415,7 +415,7 @@ The filename to provide to the input device is a source device or the string "default" To list the pulse source devices and their properties you can invoke -the command @file{pactl list sources}. +the command @command{pactl list sources}. @example ffmpeg -f pulse -i default /tmp/pulse.wav @@ -516,8 +516,8 @@ the device. Video4Linux and Video4Linux2 devices only support a limited set of @var{width}x@var{height} sizes and frame rates. You can check which are -supported for example with the command @file{dov4l} for Video4Linux -devices and the command @file{v4l-info} for Video4Linux2 devices. +supported for example with the command @command{dov4l} for Video4Linux +devices and the command @command{v4l-info} for Video4Linux2 devices. If the size for the device is set to 0x0, the input device will try to auto-detect the size to use. @@ -579,7 +579,7 @@ default to 0. Check the X11 documentation (e.g. man X) for more detailed information. -Use the @file{dpyinfo} program for getting basic information about the +Use the @command{dpyinfo} program for getting basic information about the properties of your X11 display (e.g. grep for "name" or "dimensions"). For example to grab from @file{:0.0} using @command{ffmpeg}: diff --git a/doc/libavfilter.texi b/doc/libavfilter.texi index de5baa8eec..06d9f13324 100644 --- a/doc/libavfilter.texi +++ b/doc/libavfilter.texi @@ -43,13 +43,13 @@ The result will be that in output the top half of the video is mirrored onto the bottom half. Video filters are loaded using the @var{-vf} option passed to -ffmpeg or to ffplay. Filters in the same linear chain are separated by -commas. In our example, @var{split, fifo, overlay} are in one linear -chain, and @var{fifo, crop, vflip} are in another. The points where -the linear chains join are labeled by names enclosed in square -brackets. In our example, that is @var{[T1]} and @var{[T2]}. The magic -labels @var{[in]} and @var{[out]} are the points where video is input -and output. +@command{ffmpeg} or to @command{ffplay}. Filters in the same linear +chain are separated by commas. In our example, @var{split, fifo, +overlay} are in one linear chain, and @var{fifo, crop, vflip} are in +another. The points where the linear chains join are labeled by names +enclosed in square brackets. In our example, that is @var{[T1]} and +@var{[T2]}. The magic labels @var{[in]} and @var{[out]} are the points +where video is input and output. Some filters take in input a list of parameters: they are specified after the filter name and an equal sign, and are separated each other diff --git a/doc/outdevs.texi b/doc/outdevs.texi index f352ffc6ed..8de4fe6ec4 100644 --- a/doc/outdevs.texi +++ b/doc/outdevs.texi @@ -60,7 +60,7 @@ If not specified it defaults to the size of the input video. @subsection Examples -The following command shows the @file{ffmpeg} output is an +The following command shows the @command{ffmpeg} output is an SDL window, forcing its size to the qcif format: @example ffmpeg -i INPUT -vcodec rawvideo -pix_fmt yuv420p -window_size qcif -f sdl "SDL output" diff --git a/doc/protocols.texi b/doc/protocols.texi index eab4a6aff9..da0e39f56c 100644 --- a/doc/protocols.texi +++ b/doc/protocols.texi @@ -52,7 +52,7 @@ resource to be concatenated, each one possibly specifying a distinct protocol. For example to read a sequence of files @file{split1.mpeg}, -@file{split2.mpeg}, @file{split3.mpeg} with @file{ffplay} use the +@file{split2.mpeg}, @file{split3.mpeg} with @command{ffplay} use the command: @example ffplay concat:split1.mpeg\|split2.mpeg\|split3.mpeg @@ -183,7 +183,7 @@ application specified in @var{app}, may be prefixed by "mp4:". @end table -For example to read with @file{ffplay} a multimedia resource named +For example to read with @command{ffplay} a multimedia resource named "sample" from the application "vod" from an RTMP server "myserver": @example ffplay rtmp://myserver/vod/sample @@ -224,7 +224,7 @@ For example, to stream a file in real-time to an RTMP server using ffmpeg -re -i myfile -f flv rtmp://myserver/live/mystream @end example -To play the same stream using @file{ffplay}: +To play the same stream using @command{ffplay}: @example ffplay "rtmp://myserver/live/mystream live=1" @end example @@ -249,7 +249,7 @@ The required syntax for a RTSP url is: rtsp://@var{hostname}[:@var{port}]/@var{path} @end example -The following options (set on the @command{ffmpeg}/@file{ffplay} command +The following options (set on the @command{ffmpeg}/@command{ffplay} command line, or set in code via @code{AVOption}s or in @code{avformat_open_input}), are supported: @@ -288,7 +288,7 @@ When receiving data over UDP, the demuxer tries to reorder received packets order for this to be enabled, a maximum delay must be specified in the @code{max_delay} field of AVFormatContext. -When watching multi-bitrate Real-RTSP streams with @file{ffplay}, the +When watching multi-bitrate Real-RTSP streams with @command{ffplay}, the streams to display can be chosen with @code{-vst} @var{n} and @code{-ast} @var{n} for video and audio respectively, and can be switched on the fly by pressing @code{v} and @code{a}. @@ -365,13 +365,13 @@ To broadcast a stream on the local subnet, for watching in VLC: ffmpeg -re -i @var{input} -f sap sap://224.0.0.255?same_port=1 @end example -Similarly, for watching in ffplay: +Similarly, for watching in @command{ffplay}: @example ffmpeg -re -i @var{input} -f sap sap://224.0.0.255 @end example -And for watching in ffplay, over IPv6: +And for watching in @command{ffplay}, over IPv6: @example ffmpeg -re -i @var{input} -f sap sap://[ff0e::1:2:3:4] -- cgit v1.2.3