diff options
Diffstat (limited to 'doc/ffserver.texi')
-rw-r--r-- | doc/ffserver.texi | 320 |
1 files changed, 320 insertions, 0 deletions
diff --git a/doc/ffserver.texi b/doc/ffserver.texi new file mode 100644 index 0000000000..14443e674a --- /dev/null +++ b/doc/ffserver.texi @@ -0,0 +1,320 @@ +\input texinfo @c -*- texinfo -*- + +@settitle ffserver Documentation +@titlepage +@center @titlefont{ffserver Documentation} +@end titlepage + +@top + +@contents + +@chapter Synopsis + +ffserver [@var{options}] + +@chapter Description +@c man begin DESCRIPTION + +@command{ffserver} is a streaming server for both audio and video. It +supports several live feeds, streaming from files and time shifting on +live feeds (you can seek to positions in the past on each live feed, +provided you specify a big enough feed storage in +@file{ffserver.conf}). + +@command{ffserver} receives prerecorded files or FFM streams from some +@command{ffmpeg} instance as input, then streams them over +RTP/RTSP/HTTP. + +An @command{ffserver} instance will listen on some port as specified +in the configuration file. You can launch one or more instances of +@command{ffmpeg} and send one or more FFM streams to the port where +ffserver is expecting to receive them. Alternately, you can make +@command{ffserver} launch such @command{ffmpeg} instances at startup. + +Input streams are called feeds, and each one is specified by a +@code{<Feed>} section in the configuration file. + +For each feed you can have different output streams in various +formats, each one specified by a @code{<Stream>} section in the +configuration file. + +@section Status stream + +ffserver supports an HTTP interface which exposes the current status +of the server. + +Simply point your browser to the address of the special status stream +specified in the configuration file. + +For example if you have: +@example +<Stream status.html> +Format status + +# Only allow local people to get the status +ACL allow localhost +ACL allow 192.168.0.0 192.168.255.255 +</Stream> +@end example + +then the server will post a page with the status information when +the special stream @file{status.html} is requested. + +@section What can this do? + +When properly configured and running, you can capture video and audio in real +time from a suitable capture card, and stream it out over the Internet to +either Windows Media Player or RealAudio player (with some restrictions). + +It can also stream from files, though that is currently broken. Very often, a +web server can be used to serve up the files just as well. + +It can stream prerecorded video from .ffm files, though it is somewhat tricky +to make it work correctly. + +@section How do I make it work? + +First, build the kit. It *really* helps to have installed LAME first. Then when +you run the ffserver ./configure, make sure that you have the +@code{--enable-libmp3lame} flag turned on. + +LAME is important as it allows for streaming audio to Windows Media Player. +Don't ask why the other audio types do not work. + +As a simple test, just run the following two command lines where INPUTFILE +is some file which you can decode with ffmpeg: + +@example +ffserver -f doc/ffserver.conf & +ffmpeg -i INPUTFILE http://localhost:8090/feed1.ffm +@end example + +At this point you should be able to go to your Windows machine and fire up +Windows Media Player (WMP). Go to Open URL and enter + +@example + http://<linuxbox>:8090/test.asf +@end example + +You should (after a short delay) see video and hear audio. + +WARNING: trying to stream test1.mpg doesn't work with WMP as it tries to +transfer the entire file before starting to play. +The same is true of AVI files. + +@section What happens next? + +You should edit the ffserver.conf file to suit your needs (in terms of +frame rates etc). Then install ffserver and ffmpeg, write a script to start +them up, and off you go. + +@section Troubleshooting + +@subsection I don't hear any audio, but video is fine. + +Maybe you didn't install LAME, or got your ./configure statement wrong. Check +the ffmpeg output to see if a line referring to MP3 is present. If not, then +your configuration was incorrect. If it is, then maybe your wiring is not +set up correctly. Maybe the sound card is not getting data from the right +input source. Maybe you have a really awful audio interface (like I do) +that only captures in stereo and also requires that one channel be flipped. +If you are one of these people, then export 'AUDIO_FLIP_LEFT=1' before +starting ffmpeg. + +@subsection The audio and video lose sync after a while. + +Yes, they do. + +@subsection After a long while, the video update rate goes way down in WMP. + +Yes, it does. Who knows why? + +@subsection WMP 6.4 behaves differently to WMP 7. + +Yes, it does. Any thoughts on this would be gratefully received. These +differences extend to embedding WMP into a web page. [There are two +object IDs that you can use: The old one, which does not play well, and +the new one, which does (both tested on the same system). However, +I suspect that the new one is not available unless you have installed WMP 7]. + +@section What else can it do? + +You can replay video from .ffm files that was recorded earlier. +However, there are a number of caveats, including the fact that the +ffserver parameters must match the original parameters used to record the +file. If they do not, then ffserver deletes the file before recording into it. +(Now that I write this, it seems broken). + +You can fiddle with many of the codec choices and encoding parameters, and +there are a bunch more parameters that you cannot control. Post a message +to the mailing list if there are some 'must have' parameters. Look in +ffserver.conf for a list of the currently available controls. + +It will automatically generate the ASX or RAM files that are often used +in browsers. These files are actually redirections to the underlying ASF +or RM file. The reason for this is that the browser often fetches the +entire file before starting up the external viewer. The redirection files +are very small and can be transferred quickly. [The stream itself is +often 'infinite' and thus the browser tries to download it and never +finishes.] + +@section Tips + +* When you connect to a live stream, most players (WMP, RA, etc) want to +buffer a certain number of seconds of material so that they can display the +signal continuously. However, ffserver (by default) starts sending data +in realtime. This means that there is a pause of a few seconds while the +buffering is being done by the player. The good news is that this can be +cured by adding a '?buffer=5' to the end of the URL. This means that the +stream should start 5 seconds in the past -- and so the first 5 seconds +of the stream are sent as fast as the network will allow. It will then +slow down to real time. This noticeably improves the startup experience. + +You can also add a 'Preroll 15' statement into the ffserver.conf that will +add the 15 second prebuffering on all requests that do not otherwise +specify a time. In addition, ffserver will skip frames until a key_frame +is found. This further reduces the startup delay by not transferring data +that will be discarded. + +* You may want to adjust the MaxBandwidth in the ffserver.conf to limit +the amount of bandwidth consumed by live streams. + +@section Why does the ?buffer / Preroll stop working after a time? + +It turns out that (on my machine at least) the number of frames successfully +grabbed is marginally less than the number that ought to be grabbed. This +means that the timestamp in the encoded data stream gets behind realtime. +This means that if you say 'Preroll 10', then when the stream gets 10 +or more seconds behind, there is no Preroll left. + +Fixing this requires a change in the internals of how timestamps are +handled. + +@section Does the @code{?date=} stuff work. + +Yes (subject to the limitation outlined above). Also note that whenever you +start ffserver, it deletes the ffm file (if any parameters have changed), +thus wiping out what you had recorded before. + +The format of the @code{?date=xxxxxx} is fairly flexible. You should use one +of the following formats (the 'T' is literal): + +@example +* YYYY-MM-DDTHH:MM:SS (localtime) +* YYYY-MM-DDTHH:MM:SSZ (UTC) +@end example + +You can omit the YYYY-MM-DD, and then it refers to the current day. However +note that @samp{?date=16:00:00} refers to 16:00 on the current day -- this +may be in the future and so is unlikely to be useful. + +You use this by adding the ?date= to the end of the URL for the stream. +For example: @samp{http://localhost:8080/test.asf?date=2002-07-26T23:05:00}. +@c man end + +@section What is FFM, FFM2 + +FFM and FFM2 are formats used by ffserver. They allow storing a wide variety of +video and audio streams and encoding options, and can store a moving time segment +of an infinite movie or a whole movie. + +FFM is version specific, and there is limited compatibility of FFM files +generated by one version of ffmpeg/ffserver and another version of +ffmpeg/ffserver. It may work but it is not guaranteed to work. + +FFM2 is extensible while maintaining compatibility and should work between +differing versions of tools. FFM2 is the default. + +@chapter Options +@c man begin OPTIONS + +@include fftools-common-opts.texi + +@section Main options + +@table @option +@item -f @var{configfile} +Use @file{configfile} instead of @file{/etc/ffserver.conf}. +@item -n +Enable no-launch mode. This option disables all the Launch directives +within the various <Stream> sections. Since ffserver will not launch +any ffmpeg instances, you will have to launch them manually. +@item -d +Enable debug mode. This option increases log verbosity, directs log +messages to stdout. +@end table +@c man end + +@include config.texi +@ifset config-all +@ifset config-avutil +@include utils.texi +@end ifset +@ifset config-avcodec +@include codecs.texi +@include bitstream_filters.texi +@end ifset +@ifset config-avformat +@include formats.texi +@include protocols.texi +@end ifset +@ifset config-avdevice +@include devices.texi +@end ifset +@ifset config-swresample +@include resampler.texi +@end ifset +@ifset config-swscale +@include scaler.texi +@end ifset +@ifset config-avfilter +@include filters.texi +@end ifset +@end ifset + +@chapter See Also + +@ifhtml +@ifset config-all +@url{ffserver.html,ffserver}, +@end ifset +@ifset config-not-all +@url{ffserver-all.html,ffserver-all}, +@end ifset +the @file{doc/ffserver.conf} example, +@url{ffmpeg.html,ffmpeg}, @url{ffplay.html,ffplay}, @url{ffprobe.html,ffprobe}, +@url{ffmpeg-utils.html,ffmpeg-utils}, +@url{ffmpeg-scaler.html,ffmpeg-scaler}, +@url{ffmpeg-resampler.html,ffmpeg-resampler}, +@url{ffmpeg-codecs.html,ffmpeg-codecs}, +@url{ffmpeg-bitstream-filters.html,ffmpeg-bitstream-filters}, +@url{ffmpeg-formats.html,ffmpeg-formats}, +@url{ffmpeg-devices.html,ffmpeg-devices}, +@url{ffmpeg-protocols.html,ffmpeg-protocols}, +@url{ffmpeg-filters.html,ffmpeg-filters} +@end ifhtml + +@ifnothtml +@ifset config-all +ffserver(1), +@end ifset +@ifset config-not-all +ffserver-all(1), +@end ifset +the @file{doc/ffserver.conf} example, ffmpeg(1), ffplay(1), ffprobe(1), +ffmpeg-utils(1), ffmpeg-scaler(1), ffmpeg-resampler(1), +ffmpeg-codecs(1), ffmpeg-bitstream-filters(1), ffmpeg-formats(1), +ffmpeg-devices(1), ffmpeg-protocols(1), ffmpeg-filters(1) +@end ifnothtml + +@include authors.texi + +@ignore + +@setfilename ffserver +@settitle ffserver video server + +@end ignore + +@bye |