summaryrefslogtreecommitdiff
path: root/doc/ffserver.conf
diff options
context:
space:
mode:
Diffstat (limited to 'doc/ffserver.conf')
-rw-r--r--doc/ffserver.conf371
1 files changed, 371 insertions, 0 deletions
diff --git a/doc/ffserver.conf b/doc/ffserver.conf
new file mode 100644
index 0000000000..094c093af2
--- /dev/null
+++ b/doc/ffserver.conf
@@ -0,0 +1,371 @@
+# Port on which the server is listening. You must select a different
+# port from your standard HTTP web server if it is running on the same
+# computer.
+Port 8090
+
+# Address on which the server is bound. Only useful if you have
+# several network interfaces.
+BindAddress 0.0.0.0
+
+# Number of simultaneous HTTP connections that can be handled. It has
+# to be defined *before* the MaxClients parameter, since it defines the
+# MaxClients maximum limit.
+MaxHTTPConnections 2000
+
+# Number of simultaneous requests that can be handled. Since FFServer
+# is very fast, it is more likely that you will want to leave this high
+# and use MaxBandwidth, below.
+MaxClients 1000
+
+# This the maximum amount of kbit/sec that you are prepared to
+# consume when streaming to clients.
+MaxBandwidth 1000
+
+# Access log file (uses standard Apache log file format)
+# '-' is the standard output.
+CustomLog -
+
+##################################################################
+# Definition of the live feeds. Each live feed contains one video
+# and/or audio sequence coming from an ffmpeg encoder or another
+# ffserver. This sequence may be encoded simultaneously with several
+# codecs at several resolutions.
+
+<Feed feed1.ffm>
+
+# You must use 'ffmpeg' to send a live feed to ffserver. In this
+# example, you can type:
+#
+# ffmpeg http://localhost:8090/feed1.ffm
+
+# ffserver can also do time shifting. It means that it can stream any
+# previously recorded live stream. The request should contain:
+# "http://xxxx?date=[YYYY-MM-DDT][[HH:]MM:]SS[.m...]".You must specify
+# a path where the feed is stored on disk. You also specify the
+# maximum size of the feed, where zero means unlimited. Default:
+# File=/tmp/feed_name.ffm FileMaxSize=5M
+File /tmp/feed1.ffm
+FileMaxSize 200K
+
+# You could specify
+# ReadOnlyFile /saved/specialvideo.ffm
+# This marks the file as readonly and it will not be deleted or updated.
+
+# Specify launch in order to start ffmpeg automatically.
+# First ffmpeg must be defined with an appropriate path if needed,
+# after that options can follow, but avoid adding the http:// field
+#Launch ffmpeg
+
+# Only allow connections from localhost to the feed.
+ACL allow 127.0.0.1
+
+</Feed>
+
+
+##################################################################
+# Now you can define each stream which will be generated from the
+# original audio and video stream. Each format has a filename (here
+# 'test1.mpg'). FFServer will send this stream when answering a
+# request containing this filename.
+
+<Stream test1.mpg>
+
+# coming from live feed 'feed1'
+Feed feed1.ffm
+
+# Format of the stream : you can choose among:
+# mpeg : MPEG-1 multiplexed video and audio
+# mpegvideo : only MPEG-1 video
+# mp2 : MPEG-2 audio (use AudioCodec to select layer 2 and 3 codec)
+# ogg : Ogg format (Vorbis audio codec)
+# rm : RealNetworks-compatible stream. Multiplexed audio and video.
+# ra : RealNetworks-compatible stream. Audio only.
+# mpjpeg : Multipart JPEG (works with Netscape without any plugin)
+# jpeg : Generate a single JPEG image.
+# asf : ASF compatible streaming (Windows Media Player format).
+# swf : Macromedia Flash compatible stream
+# avi : AVI format (MPEG-4 video, MPEG audio sound)
+Format mpeg
+
+# Bitrate for the audio stream. Codecs usually support only a few
+# different bitrates.
+AudioBitRate 32
+
+# Number of audio channels: 1 = mono, 2 = stereo
+AudioChannels 1
+
+# Sampling frequency for audio. When using low bitrates, you should
+# lower this frequency to 22050 or 11025. The supported frequencies
+# depend on the selected audio codec.
+AudioSampleRate 44100
+
+# Bitrate for the video stream
+VideoBitRate 64
+
+# Ratecontrol buffer size
+VideoBufferSize 40
+
+# Number of frames per second
+VideoFrameRate 3
+
+# Size of the video frame: WxH (default: 160x128)
+# The following abbreviations are defined: sqcif, qcif, cif, 4cif, qqvga,
+# qvga, vga, svga, xga, uxga, qxga, sxga, qsxga, hsxga, wvga, wxga, wsxga,
+# wuxga, woxga, wqsxga, wquxga, whsxga, whuxga, cga, ega, hd480, hd720,
+# hd1080
+VideoSize 160x128
+
+# Transmit only intra frames (useful for low bitrates, but kills frame rate).
+#VideoIntraOnly
+
+# If non-intra only, an intra frame is transmitted every VideoGopSize
+# frames. Video synchronization can only begin at an intra frame.
+VideoGopSize 12
+
+# More MPEG-4 parameters
+# VideoHighQuality
+# Video4MotionVector
+
+# Choose your codecs:
+#AudioCodec mp2
+#VideoCodec mpeg1video
+
+# Suppress audio
+#NoAudio
+
+# Suppress video
+#NoVideo
+
+#VideoQMin 3
+#VideoQMax 31
+
+# Set this to the number of seconds backwards in time to start. Note that
+# most players will buffer 5-10 seconds of video, and also you need to allow
+# for a keyframe to appear in the data stream.
+#Preroll 15
+
+# ACL:
+
+# You can allow ranges of addresses (or single addresses)
+#ACL ALLOW <first address> <last address>
+
+# You can deny ranges of addresses (or single addresses)
+#ACL DENY <first address> <last address>
+
+# You can repeat the ACL allow/deny as often as you like. It is on a per
+# stream basis. The first match defines the action. If there are no matches,
+# then the default is the inverse of the last ACL statement.
+#
+# Thus 'ACL allow localhost' only allows access from localhost.
+# 'ACL deny 1.0.0.0 1.255.255.255' would deny the whole of network 1 and
+# allow everybody else.
+
+</Stream>
+
+
+##################################################################
+# Example streams
+
+
+# Multipart JPEG
+
+#<Stream test.mjpg>
+#Feed feed1.ffm
+#Format mpjpeg
+#VideoFrameRate 2
+#VideoIntraOnly
+#NoAudio
+#Strict -1
+#</Stream>
+
+
+# Single JPEG
+
+#<Stream test.jpg>
+#Feed feed1.ffm
+#Format jpeg
+#VideoFrameRate 2
+#VideoIntraOnly
+##VideoSize 352x240
+#NoAudio
+#Strict -1
+#</Stream>
+
+
+# Flash
+
+#<Stream test.swf>
+#Feed feed1.ffm
+#Format swf
+#VideoFrameRate 2
+#VideoIntraOnly
+#NoAudio
+#</Stream>
+
+
+# ASF compatible
+
+<Stream test.asf>
+Feed feed1.ffm
+Format asf
+VideoFrameRate 15
+VideoSize 352x240
+VideoBitRate 256
+VideoBufferSize 40
+VideoGopSize 30
+AudioBitRate 64
+StartSendOnKey
+</Stream>
+
+
+# MP3 audio
+
+#<Stream test.mp3>
+#Feed feed1.ffm
+#Format mp2
+#AudioCodec mp3
+#AudioBitRate 64
+#AudioChannels 1
+#AudioSampleRate 44100
+#NoVideo
+#</Stream>
+
+
+# Ogg Vorbis audio
+
+#<Stream test.ogg>
+#Feed feed1.ffm
+#Metadata title "Stream title"
+#AudioBitRate 64
+#AudioChannels 2
+#AudioSampleRate 44100
+#NoVideo
+#</Stream>
+
+
+# Real with audio only at 32 kbits
+
+#<Stream test.ra>
+#Feed feed1.ffm
+#Format rm
+#AudioBitRate 32
+#NoVideo
+#NoAudio
+#</Stream>
+
+
+# Real with audio and video at 64 kbits
+
+#<Stream test.rm>
+#Feed feed1.ffm
+#Format rm
+#AudioBitRate 32
+#VideoBitRate 128
+#VideoFrameRate 25
+#VideoGopSize 25
+#NoAudio
+#</Stream>
+
+
+##################################################################
+# A stream coming from a file: you only need to set the input
+# filename and optionally a new format. Supported conversions:
+# AVI -> ASF
+
+#<Stream file.rm>
+#File "/usr/local/httpd/htdocs/tlive.rm"
+#NoAudio
+#</Stream>
+
+#<Stream file.asf>
+#File "/usr/local/httpd/htdocs/test.asf"
+#NoAudio
+#Metadata author "Me"
+#Metadata copyright "Super MegaCorp"
+#Metadata title "Test stream from disk"
+#Metadata comment "Test comment"
+#</Stream>
+
+
+##################################################################
+# RTSP examples
+#
+# You can access this stream with the RTSP URL:
+# rtsp://localhost:5454/test1-rtsp.mpg
+#
+# A non-standard RTSP redirector is also created. Its URL is:
+# http://localhost:8090/test1-rtsp.rtsp
+
+#<Stream test1-rtsp.mpg>
+#Format rtp
+#File "/usr/local/httpd/htdocs/test1.mpg"
+#</Stream>
+
+
+# Transcode an incoming live feed to another live feed,
+# using libx264 and video presets
+
+#<Stream live.h264>
+#Format rtp
+#Feed feed1.ffm
+#VideoCodec libx264
+#VideoFrameRate 24
+#VideoBitRate 100
+#VideoSize 480x272
+#AVPresetVideo default
+#AVPresetVideo baseline
+#AVOptionVideo flags +global_header
+#
+#AudioCodec libfaac
+#AudioBitRate 32
+#AudioChannels 2
+#AudioSampleRate 22050
+#AVOptionAudio flags +global_header
+#</Stream>
+
+##################################################################
+# SDP/multicast examples
+#
+# If you want to send your stream in multicast, you must set the
+# multicast address with MulticastAddress. The port and the TTL can
+# also be set.
+#
+# An SDP file is automatically generated by ffserver by adding the
+# 'sdp' extension to the stream name (here
+# http://localhost:8090/test1-sdp.sdp). You should usually give this
+# file to your player to play the stream.
+#
+# The 'NoLoop' option can be used to avoid looping when the stream is
+# terminated.
+
+#<Stream test1-sdp.mpg>
+#Format rtp
+#File "/usr/local/httpd/htdocs/test1.mpg"
+#MulticastAddress 224.124.0.1
+#MulticastPort 5000
+#MulticastTTL 16
+#NoLoop
+#</Stream>
+
+
+##################################################################
+# Special streams
+
+# Server status
+
+<Stream stat.html>
+Format status
+
+# Only allow local people to get the status
+ACL allow localhost
+ACL allow 192.168.0.0 192.168.255.255
+
+#FaviconURL http://pond1.gladstonefamily.net:8080/favicon.ico
+</Stream>
+
+
+# Redirect index.html to the appropriate site
+
+<Redirect index.html>
+URL http://www.ffmpeg.org/
+</Redirect>