diff options
| -rw-r--r-- | doc/encoders.texi | 43 | ||||
| -rw-r--r-- | libavcodec/ac3.h | 3 | ||||
| -rw-r--r-- | libavcodec/ac3dec.h | 5 | ||||
| -rw-r--r-- | libavcodec/ac3dec_data.c | 6 | ||||
| -rw-r--r-- | libavcodec/ac3dec_data.h | 1 | ||||
| -rw-r--r-- | libavcodec/ac3enc.c | 892 | ||||
| -rw-r--r-- | libavcodec/ac3enc_fixed.c | 2 | ||||
| -rw-r--r-- | libavcodec/ac3enc_float.c | 6 | ||||
| -rw-r--r-- | libavcodec/ac3tab.c | 7 | ||||
| -rw-r--r-- | libavcodec/ac3tab.h | 1 |
10 files changed, 787 insertions, 179 deletions
diff --git a/doc/encoders.texi b/doc/encoders.texi index 2f3cecde66..760ec4bad9 100644 --- a/doc/encoders.texi +++ b/doc/encoders.texi @@ -365,4 +365,47 @@ is highly recommended that it be left as enabled except for testing purposes. @end table +@subheading Floating-Point-Only AC-3 Encoding Options + +These options are only valid for the floating-point encoder and do not exist +for the fixed-point encoder due to the corresponding features not being +implemented in fixed-point. + +@table @option + +@item -channel_coupling @var{boolean} +Enables/Disables use of channel coupling, which is an optional AC-3 feature +that increases quality by combining high frequency information from multiple +channels into a single channel. The per-channel high frequency information is +sent with less accuracy in both the frequency and time domains. This allows +more bits to be used for lower frequencies while preserving enough information +to reconstruct the high frequencies. This option is enabled by default for the +floating-point encoder and should generally be left as enabled except for +testing purposes or to increase encoding speed. +@table @option +@item -1 +@itemx auto +Selected by Encoder (default) +@item 0 +@itemx off +Disable Channel Coupling +@item 1 +@itemx on +Enable Channel Coupling +@end table + +@item -cpl_start_band @var{number} +Coupling Start Band. Sets the channel coupling start band, from 1 to 15. If a +value higher than the bandwidth is used, it will be reduced to 1 less than the +coupling end band. If @var{auto} is used, the start band will be determined by +the encoder based on the bit rate, sample rate, and channel layout. This option +has no effect if channel coupling is disabled. +@table @option +@item -1 +@itemx auto +Selected by Encoder (default) +@end table + +@end table + @c man end ENCODERS diff --git a/libavcodec/ac3.h b/libavcodec/ac3.h index 4ed8c2523b..c06f3d542d 100644 --- a/libavcodec/ac3.h +++ b/libavcodec/ac3.h @@ -28,7 +28,8 @@ #define AVCODEC_AC3_H #define AC3_MAX_CODED_FRAME_SIZE 3840 /* in bytes */ -#define AC3_MAX_CHANNELS 6 /* including LFE channel */ +#define AC3_MAX_CHANNELS 7 /**< maximum number of channels, including coupling channel */ +#define CPL_CH 0 /**< coupling channel index */ #define AC3_MAX_COEFS 256 #define AC3_BLOCK_SIZE 256 diff --git a/libavcodec/ac3dec.h b/libavcodec/ac3dec.h index 6cba95b495..f0ab75ae98 100644 --- a/libavcodec/ac3dec.h +++ b/libavcodec/ac3dec.h @@ -58,11 +58,6 @@ #include "fft.h" #include "fmtconvert.h" -/* override ac3.h to include coupling channel */ -#undef AC3_MAX_CHANNELS -#define AC3_MAX_CHANNELS 7 -#define CPL_CH 0 - #define AC3_OUTPUT_LFEON 8 #define SPX_MAX_BANDS 17 diff --git a/libavcodec/ac3dec_data.c b/libavcodec/ac3dec_data.c index ba3cbd30ef..272a963f08 100644 --- a/libavcodec/ac3dec_data.c +++ b/libavcodec/ac3dec_data.c @@ -54,12 +54,6 @@ const uint8_t ff_eac3_hebap_tab[64] = { }; /** - * Table E2.16 Default Coupling Banding Structure - */ -const uint8_t ff_eac3_default_cpl_band_struct[18] = -{ 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 1, 0, 1, 1, 1, 1, 1 }; - -/** * Table E2.15 Default Spectral Extension Banding Structure */ const uint8_t ff_eac3_default_spx_band_struct[17] = diff --git a/libavcodec/ac3dec_data.h b/libavcodec/ac3dec_data.h index a758f8b3d3..c0a584e7b3 100644 --- a/libavcodec/ac3dec_data.h +++ b/libavcodec/ac3dec_data.h @@ -27,7 +27,6 @@ extern const uint8_t ff_ac3_ungroup_3_in_5_bits_tab[32][3]; extern const uint8_t ff_eac3_hebap_tab[64]; -extern const uint8_t ff_eac3_default_cpl_band_struct[18]; extern const uint8_t ff_eac3_default_spx_band_struct[17]; #endif /* AVCODEC_AC3DEC_DATA_H */ diff --git a/libavcodec/ac3enc.c b/libavcodec/ac3enc.c index 95bdc58f16..5014fdb753 100644 --- a/libavcodec/ac3enc.c +++ b/libavcodec/ac3enc.c @@ -99,6 +99,8 @@ typedef struct AC3EncOptions { /* other encoding options */ int allow_per_frame_metadata; int stereo_rematrixing; + int channel_coupling; + int cpl_start; } AC3EncOptions; /** @@ -114,10 +116,22 @@ typedef struct AC3Block { int16_t **band_psd; ///< psd per critical band int16_t **mask; ///< masking curve uint16_t **qmant; ///< quantized mantissas + uint8_t **cpl_coord_exp; ///< coupling coord exponents (cplcoexp) + uint8_t **cpl_coord_mant; ///< coupling coord mantissas (cplcomant) uint8_t coeff_shift[AC3_MAX_CHANNELS]; ///< fixed-point coefficient shift values uint8_t new_rematrixing_strategy; ///< send new rematrixing flags in this block + int num_rematrixing_bands; ///< number of rematrixing bands uint8_t rematrixing_flags[4]; ///< rematrixing flags struct AC3Block *exp_ref_block[AC3_MAX_CHANNELS]; ///< reference blocks for EXP_REUSE + int new_cpl_strategy; ///< send new coupling strategy + int cpl_in_use; ///< coupling in use for this block (cplinu) + uint8_t channel_in_cpl[AC3_MAX_CHANNELS]; ///< channel in coupling (chincpl) + int num_cpl_channels; ///< number of channels in coupling + uint8_t new_cpl_coords; ///< send new coupling coordinates (cplcoe) + uint8_t cpl_master_exp[AC3_MAX_CHANNELS]; ///< coupling coord master exponents (mstrcplco) + int new_snr_offsets; ///< send new SNR offsets + int new_cpl_leak; ///< send new coupling leak info + int end_freq[AC3_MAX_CHANNELS]; ///< end frequency bin (endmant) } AC3Block; /** @@ -164,10 +178,16 @@ typedef struct AC3EncodeContext { int cutoff; ///< user-specified cutoff frequency, in Hz int bandwidth_code; ///< bandwidth code (0 to 60) (chbwcod) - int nb_coefs[AC3_MAX_CHANNELS]; + int start_freq[AC3_MAX_CHANNELS]; ///< start frequency bin (strtmant) + int cpl_end_freq; ///< coupling channel end frequency bin + + int cpl_on; ///< coupling turned on for this frame + int cpl_enabled; ///< coupling enabled for all frames + int num_cpl_subbands; ///< number of coupling subbands (ncplsubnd) + int num_cpl_bands; ///< number of coupling bands (ncplbnd) + uint8_t cpl_band_sizes[AC3_MAX_CPL_BANDS]; ///< number of coeffs in each coupling band int rematrixing_enabled; ///< stereo rematrixing enabled - int num_rematrixing_bands; ///< number of rematrixing bands /* bitrate allocation control */ int slow_gain_code; ///< slow gain code (sgaincod) @@ -194,6 +214,8 @@ typedef struct AC3EncodeContext { int16_t *band_psd_buffer; int16_t *mask_buffer; uint16_t *qmant_buffer; + uint8_t *cpl_coord_exp_buffer; + uint8_t *cpl_coord_mant_buffer; uint8_t exp_strategy[AC3_MAX_CHANNELS][AC3_MAX_BLOCKS]; ///< exponent strategies @@ -267,6 +289,12 @@ static const AVOption options[] = { {"hdcd", "HDCD", 0, FF_OPT_TYPE_CONST, {.dbl = 1 }, INT_MIN, INT_MAX, AC3ENC_PARAM, "ad_conv_type"}, /* Other Encoding Options */ {"stereo_rematrixing", "Stereo Rematrixing", OFFSET(stereo_rematrixing), FF_OPT_TYPE_INT, {.dbl = 1 }, 0, 1, AC3ENC_PARAM}, +#if CONFIG_AC3ENC_FLOAT +{"channel_coupling", "Channel Coupling", OFFSET(channel_coupling), FF_OPT_TYPE_INT, {.dbl = 1 }, 0, 1, AC3ENC_PARAM, "channel_coupling"}, + {"auto", "Selected by the Encoder", 0, FF_OPT_TYPE_CONST, {.dbl = -1 }, INT_MIN, INT_MAX, AC3ENC_PARAM, "channel_coupling"}, +{"cpl_start_band", "Coupling Start Band", OFFSET(cpl_start), FF_OPT_TYPE_INT, {.dbl = -1 }, -1, 15, AC3ENC_PARAM, "cpl_start_band"}, + {"auto", "Selected by the Encoder", 0, FF_OPT_TYPE_CONST, {.dbl = -1 }, INT_MIN, INT_MAX, AC3ENC_PARAM, "cpl_start_band"}, +#endif {NULL} }; @@ -296,9 +324,9 @@ static void scale_coefficients(AC3EncodeContext *s); /** * LUT for number of exponent groups. - * exponent_group_tab[exponent strategy-1][number of coefficients] + * exponent_group_tab[coupling][exponent strategy-1][number of coefficients] */ -static uint8_t exponent_group_tab[3][256]; +static uint8_t exponent_group_tab[2][3][256]; /** @@ -358,6 +386,49 @@ static const uint8_t ac3_bandwidth_tab[5][3][19] = { /** + * LUT to select the coupling start band based on the bit rate, sample rate, and + * number of full-bandwidth channels. -1 = coupling off + * ac3_coupling_start_tab[channel_mode-2][sample rate code][bit rate code] + * + * TODO: more testing for optimal parameters. + * multi-channel tests at 44.1kHz and 32kHz. + */ +static const int8_t ac3_coupling_start_tab[6][3][19] = { +// 32 40 48 56 64 80 96 112 128 160 192 224 256 320 384 448 512 576 640 + + // 2/0 + { { 0, 0, 0, 0, 0, 0, 0, 1, 1, 7, 8, 11, 12, -1, -1, -1, -1, -1, -1 }, + { 0, 0, 0, 0, 0, 0, 1, 3, 5, 7, 10, 12, 13, -1, -1, -1, -1, -1, -1 }, + { 0, 0, 0, 0, 1, 2, 2, 9, 13, 15, -1, -1, -1, -1, -1, -1, -1, -1, -1 } }, + + // 3/0 + { { 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 6, 9, 11, 12, 13, -1, -1, -1, -1 }, + { 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 6, 9, 11, 12, 13, -1, -1, -1, -1 }, + { -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 } }, + + // 2/1 - untested + { { 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 6, 9, 11, 12, 13, -1, -1, -1, -1 }, + { 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 6, 9, 11, 12, 13, -1, -1, -1, -1 }, + { -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 } }, + + // 3/1 + { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, 2, 10, 11, 11, 12, 12, 14, -1 }, + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, 2, 10, 11, 11, 12, 12, 14, -1 }, + { -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 } }, + + // 2/2 - untested + { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, 2, 10, 11, 11, 12, 12, 14, -1 }, + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, 2, 10, 11, 11, 12, 12, 14, -1 }, + { -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 } }, + + // 3/2 + { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 6, 8, 11, 12, 12, -1, -1 }, + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 6, 8, 11, 12, 12, -1, -1 }, + { -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 } }, +}; + + +/** * Adjust the frame size to make the average bit rate match the target bit rate. * This is only needed for 11025, 22050, and 44100 sample rates. */ @@ -419,15 +490,297 @@ static void apply_mdct(AC3EncodeContext *s) apply_window(&s->dsp, s->windowed_samples, input_samples, s->mdct.window, AC3_WINDOW_SIZE); - block->coeff_shift[ch] = normalize_samples(s); + block->coeff_shift[ch+1] = normalize_samples(s); - s->mdct.fft.mdct_calcw(&s->mdct.fft, block->mdct_coef[ch], + s->mdct.fft.mdct_calcw(&s->mdct.fft, block->mdct_coef[ch+1], s->windowed_samples); } } } +static void compute_coupling_strategy(AC3EncodeContext *s) +{ + int blk, ch; + int got_cpl_snr; + + /* set coupling use flags for each block/channel */ + /* TODO: turn coupling on/off and adjust start band based on bit usage */ + for (blk = 0; blk < AC3_MAX_BLOCKS; blk++) { + AC3Block *block = &s->blocks[blk]; + for (ch = 1; ch <= s->fbw_channels; ch++) + block->channel_in_cpl[ch] = s->cpl_on; + } + + /* enable coupling for each block if at least 2 channels have coupling + enabled for that block */ + got_cpl_snr = 0; + for (blk = 0; blk < AC3_MAX_BLOCKS; blk++) { + AC3Block *block = &s->blocks[blk]; + block->num_cpl_channels = 0; + for (ch = 1; ch <= s->fbw_channels; ch++) + block->num_cpl_channels += block->channel_in_cpl[ch]; + block->cpl_in_use = block->num_cpl_channels > 1; + if (!block->cpl_in_use) { + block->num_cpl_channels = 0; + for (ch = 1; ch <= s->fbw_channels; ch++) + block->channel_in_cpl[ch] = 0; + } + + block->new_cpl_strategy = !blk; + if (blk) { + for (ch = 1; ch <= s->fbw_channels; ch++) { + if (block->channel_in_cpl[ch] != s->blocks[blk-1].channel_in_cpl[ch]) { + block->new_cpl_strategy = 1; + break; + } + } + } + block->new_cpl_leak = block->new_cpl_strategy; + + if (!blk || (block->cpl_in_use && !got_cpl_snr)) { + block->new_snr_offsets = 1; + if (block->cpl_in_use) + got_cpl_snr = 1; + } else { + block->new_snr_offsets = 0; + } + } + + /* set bandwidth for each channel */ + for (blk = 0; blk < AC3_MAX_BLOCKS; blk++) { + AC3Block *block = &s->blocks[blk]; + for (ch = 1; ch <= s->fbw_channels; ch++) { + if (block->channel_in_cpl[ch]) + block->end_freq[ch] = s->start_freq[CPL_CH]; + else + block->end_freq[ch] = s->bandwidth_code * 3 + 73; + } + } +} + + +/** + * Calculate a single coupling coordinate. + */ +static inline float calc_cpl_coord(float energy_ch, float energy_cpl) +{ + float coord = 0.125; + if (energy_cpl > 0) + coord *= sqrtf(energy_ch / energy_cpl); + return coord; +} + + +/** + * Calculate coupling channel and coupling coordinates. + * TODO: Currently this is only used for the floating-point encoder. I was + * able to make it work for the fixed-point encoder, but quality was + * generally lower in most cases than not using coupling. If a more + * adaptive coupling strategy were to be implemented it might be useful + * at that time to use coupling for the fixed-point encoder as well. + */ +static void apply_channel_coupling(AC3EncodeContext *s) +{ +#if CONFIG_AC3ENC_FLOAT + DECLARE_ALIGNED(16, float, cpl_coords) [AC3_MAX_BLOCKS][AC3_MAX_CHANNELS][16]; + DECLARE_ALIGNED(16, int32_t, fixed_cpl_coords)[AC3_MAX_BLOCKS][AC3_MAX_CHANNELS][16]; + int blk, ch, bnd, i, j; + CoefSumType energy[AC3_MAX_BLOCKS][AC3_MAX_CHANNELS][16] = {{{0}}}; + int num_cpl_coefs = s->num_cpl_subbands * 12; + + /* calculate coupling channel from fbw channels */ + for (blk = 0; blk < AC3_MAX_BLOCKS; blk++) { + AC3Block *block = &s->blocks[blk]; + CoefType *cpl_coef = &block->mdct_coef[CPL_CH][s->start_freq[CPL_CH]]; + if (!block->cpl_in_use) + continue; + memset(cpl_coef-1, 0, (num_cpl_coefs+4) * sizeof(*cpl_coef)); + for (ch = 1; ch <= s->fbw_channels; ch++) { + CoefType *ch_coef = &block->mdct_coef[ch][s->start_freq[CPL_CH]]; + if (!block->channel_in_cpl[ch]) + continue; + for (i = 0; i < num_cpl_coefs; i++) + cpl_coef[i] += ch_coef[i]; + } + /* note: coupling start bin % 4 will always be 1 and num_cpl_coefs + will always be a multiple of 12, so we need to subtract 1 from + the start and add 4 to the length when using optimized + functions which require 16-byte alignment. */ + + /* coefficients must be clipped to +/- 1.0 in order to be encoded */ + s->dsp.vector_clipf(cpl_coef-1, cpl_coef-1, -1.0f, 1.0f, num_cpl_coefs+4); + + /* scale coupling coefficients from float to 24-bit fixed-point */ + s->ac3dsp.float_to_fixed24(&block->fixed_coef[CPL_CH][s->start_freq[CPL_CH]-1], + cpl_coef-1, num_cpl_coefs+4); + } + + /* calculate energy in each band in coupling channel and each fbw channel */ + /* TODO: possibly use SIMD to speed up energy calculation */ + bnd = 0; + i = s->start_freq[CPL_CH]; + while (i < s->cpl_end_freq) { + int band_size = s->cpl_band_sizes[bnd]; + for (ch = CPL_CH; ch <= s->fbw_channels; ch++) { + for (blk = 0; blk < AC3_MAX_BLOCKS; blk++) { + AC3Block *block = &s->blocks[blk]; + if (!block->cpl_in_use || (ch > CPL_CH && !block->channel_in_cpl[ch])) + continue; + for (j = 0; j < band_size; j++) { + CoefType v = block->mdct_coef[ch][i+j]; + MAC_COEF(energy[blk][ch][bnd], v, v); + } + } + } + i += band_size; + bnd++; + } + + /* determine which blocks to send new coupling coordinates for */ + for (blk = 0; blk < AC3_MAX_BLOCKS; blk++) { + AC3Block *block = &s->blocks[blk]; + AC3Block *block0 = blk ? &s->blocks[blk-1] : NULL; + int new_coords = 0; + CoefSumType coord_diff[AC3_MAX_CHANNELS] = {0,}; + + if (block->cpl_in_use) { + /* calculate coupling coordinates for all blocks and calculate the + average difference between coordinates in successive blocks */ + for (ch = 1; ch <= s->fbw_channels; ch++) { + if (!block->channel_in_cpl[ch]) + continue; + + for (bnd = 0; bnd < s->num_cpl_bands; bnd++) { + cpl_coords[blk][ch][bnd] = calc_cpl_coord(energy[blk][ch][bnd], + energy[blk][CPL_CH][bnd]); + if (blk > 0 && block0->cpl_in_use && + block0->channel_in_cpl[ch]) { + coord_diff[ch] += fabs(cpl_coords[blk-1][ch][bnd] - + cpl_coords[blk ][ch][bnd]); + } + } + coord_diff[ch] /= s->num_cpl_bands; + } + + /* send new coordinates if this is the first block, if previous + * block did not use coupling but this block does, the channels + * using coupling has changed from the previous block, or the + * coordinate difference from the last block for any channel is + * greater than a threshold value. */ + if (blk == 0) { + new_coords = 1; + } else if (!block0->cpl_in_use) { + new_coords = 1; + } else { + for (ch = 1; ch <= s->fbw_channels; ch++) { + if (block->channel_in_cpl[ch] && !block0->channel_in_cpl[ch]) { + new_coords = 1; + break; + } + } + if (!new_coords) { + for (ch = 1; ch <= s->fbw_channels; ch++) { + if (block->channel_in_cpl[ch] && coord_diff[ch] > 0.04) { + new_coords = 1; + break; + } + } + } + } + } + block->new_cpl_coords = new_coords; + } + + /* calculate final coupling coordinates, taking into account reusing of + coordinates in successive blocks */ + for (bnd = 0; bnd < s->num_cpl_bands; bnd++) { + blk = 0; + while (blk < AC3_MAX_BLOCKS) { + int blk1; + CoefSumType energy_cpl; + AC3Block *block = &s->blocks[blk]; + + if (!block->cpl_in_use) { + blk++; + continue; + } + + energy_cpl = energy[blk][CPL_CH][bnd]; + blk1 = blk+1; + while (!s->blocks[blk1].new_cpl_coords && blk1 < AC3_MAX_BLOCKS) { + if (s->blocks[blk1].cpl_in_use) + energy_cpl += energy[blk1][CPL_CH][bnd]; + blk1++; + } + + for (ch = 1; ch <= s->fbw_channels; ch++) { + CoefType energy_ch; + if (!block->channel_in_cpl[ch]) + continue; + energy_ch = energy[blk][ch][bnd]; + blk1 = blk+1; + while (!s->blocks[blk1].new_cpl_coords && blk1 < AC3_MAX_BLOCKS) { + if (s->blocks[blk1].cpl_in_use) + energy_ch += energy[blk1][ch][bnd]; + blk1++; + } + cpl_coords[blk][ch][bnd] = calc_cpl_coord(energy_ch, energy_cpl); + } + blk = blk1; + } + } + + /* calculate exponents/mantissas for coupling coordinates */ + for (blk = 0; blk < AC3_MAX_BLOCKS; blk++) { + AC3Block *block = &s->blocks[blk]; + if (!block->cpl_in_use || !block->new_cpl_coords) + continue; + + s->ac3dsp.float_to_fixed24(fixed_cpl_coords[blk][1], + cpl_coords[blk][1], + s->fbw_channels * 16); + s->ac3dsp.extract_exponents(block->cpl_coord_exp[1], + fixed_cpl_coords[blk][1], + s->fbw_channels * 16); + + for (ch = 1; ch <= s->fbw_channels; ch++) { + int bnd, min_exp, max_exp, master_exp; + + /* determine master exponent */ + min_exp = max_exp = block->cpl_coord_exp[ch][0]; + for (bnd = 1; bnd < s->num_cpl_bands; bnd++) { + int exp = block->cpl_coord_exp[ch][bnd]; + min_exp = FFMIN(exp, min_exp); + max_exp = FFMAX(exp, max_exp); + } + master_exp = ((max_exp - 15) + 2) / 3; + master_exp = FFMAX(master_exp, 0); + while (min_exp < master_exp * 3) + master_exp--; + for (bnd = 0; bnd < s->num_cpl_bands; bnd++) { + block->cpl_coord_exp[ch][bnd] = av_clip(block->cpl_coord_exp[ch][bnd] - + master_exp * 3, 0, 15); + } + block->cpl_master_exp[ch] = master_exp; + + /* quantize mantissas */ + for (bnd = 0; bnd < s->num_cpl_bands; bnd++) { + int cpl_exp = block->cpl_coord_exp[ch][bnd]; + int cpl_mant = (fixed_cpl_coords[blk][ch][bnd] << (5 + cpl_exp + master_exp * 3)) >> 24; + if (cpl_exp == 15) + cpl_mant >>= 1; + else + cpl_mant -= 16; + + block->cpl_coord_mant[ch][bnd] = cpl_mant; + } + } + } +#endif /* CONFIG_AC3ENC_FLOAT */ +} + + /** * Determine rematrixing flags for each block and band. */ @@ -440,23 +793,32 @@ static void compute_rematrixing_strategy(AC3EncodeContext *s) if (s->channel_mode != AC3_CHMODE_STEREO) return; - s->num_rematrixing_bands = 4; - - nb_coefs = FFMIN(s->nb_coefs[0], s->nb_coefs[1]); - for (blk = 0; blk < AC3_MAX_BLOCKS; blk++) { block = &s->blocks[blk]; block->new_rematrixing_strategy = !blk; - if (!s->rematrixing_enabled) + + if (!s->rematrixing_enabled) { + block0 = block; continue; - for (bnd = 0; bnd < s->num_rematrixing_bands; bnd++) { + } + + block->num_rematrixing_bands = 4; + if (block->cpl_in_use) { + block->num_rematrixing_bands -= (s->start_freq[CPL_CH] <= 61); + block->num_rematrixing_bands -= (s->start_freq[CPL_CH] == 37); + if (blk && block->num_rematrixing_bands != block0->num_rematrixing_bands) + block->new_rematrixing_strategy = 1; + } + nb_coefs = FFMIN(block->end_freq[1], block->end_freq[2]); + + for (bnd = 0; bnd < block->num_rematrixing_bands; bnd++) { /* calculate calculate sum of squared coeffs for one band in one block */ int start = ff_ac3_rematrix_band_tab[bnd]; int end = FFMIN(nb_coefs, ff_ac3_rematrix_band_tab[bnd+1]); CoefSumType sum[4] = {0,}; for (i = start; i < end; i++) { - CoefType lt = block->mdct_coef[0][i]; - CoefType rt = block->mdct_coef[1][i]; + CoefType lt = block->mdct_coef[1][i]; + CoefType rt = block->mdct_coef[2][i]; CoefType md = lt + rt; CoefType sd = lt - rt; MAC_COEF(sum[0], lt, lt); @@ -495,21 +857,20 @@ static void apply_rematrixing(AC3EncodeContext *s) if (!s->rematrixing_enabled) return; - nb_coefs = FFMIN(s->nb_coefs[0], s->nb_coefs[1]); - for (blk = 0; blk < AC3_MAX_BLOCKS; blk++) { AC3Block *block = &s->blocks[blk]; if (block->new_rematrixing_strategy) flags = block->rematrixing_flags; - for (bnd = 0; bnd < s->num_rematrixing_bands; bnd++) { + nb_coefs = FFMIN(block->end_freq[1], block->end_freq[2]); + for (bnd = 0; bnd < block->num_rematrixing_bands; bnd++) { if (flags[bnd]) { start = ff_ac3_rematrix_band_tab[bnd]; end = FFMIN(nb_coefs, ff_ac3_rematrix_band_tab[bnd+1]); for (i = start; i < end; i++) { - int32_t lt = block->fixed_coef[0][i]; - int32_t rt = block->fixed_coef[1][i]; - block->fixed_coef[0][i] = (lt + rt) >> 1; - block->fixed_coef[1][i] = (lt - rt) >> 1; + int32_t lt = block->fixed_coef[1][i]; + int32_t rt = block->fixed_coef[2][i]; + block->fixed_coef[1][i] = (lt + rt) >> 1; + block->fixed_coef[2][i] = (lt - rt) >> 1; } } } @@ -526,12 +887,13 @@ static av_cold void exponent_init(AC3EncodeContext *s) for (expstr = EXP_D15-1; expstr <= EXP_D45-1; expstr++) { grpsize = 3 << expstr; - for (i = 73; i < 256; i++) { - exponent_group_tab[expstr][i] = (i + grpsize - 4) / grpsize; + for (i = 12; i < 256; i++) { + exponent_group_tab[0][expstr][i] = (i + grpsize - 4) / grpsize; + exponent_group_tab[1][expstr][i] = (i ) / grpsize; } } /* LFE */ - exponent_group_tab[0][7] = 2; + exponent_group_tab[0][0][7] = 2; } @@ -544,7 +906,7 @@ static void extract_exponents(AC3EncodeContext *s) { int blk, ch; - for (ch = 0; ch < s->channels; ch++) { + for (ch = !s->cpl_on; ch <= s->channels; ch++) { for (blk = 0; blk < AC3_MAX_BLOCKS; blk++) { AC3Block *block = &s->blocks[blk]; s->ac3dsp.extract_exponents(block->exp[ch], block->fixed_coef[ch], @@ -569,7 +931,7 @@ static void compute_exp_strategy(AC3EncodeContext *s) { int ch, blk, blk1; - for (ch = 0; ch < s->fbw_channels; ch++) { + for (ch = !s->cpl_on; ch <= s->fbw_channels; ch++) { uint8_t *exp_strategy = s->exp_strategy[ch]; uint8_t *exp = s->blocks[0].exp[ch]; int exp_diff; @@ -578,13 +940,18 @@ static void compute_exp_strategy(AC3EncodeContext *s) reused in the next frame */ exp_strategy[0] = EXP_NEW; exp += AC3_MAX_COEFS; - for (blk = 1; blk < AC3_MAX_BLOCKS; blk++) { + for (blk = 1; blk < AC3_MAX_BLOCKS; blk++, exp += AC3_MAX_COEFS) { + if ((ch == CPL_CH && (!s->blocks[blk].cpl_in_use || !s->blocks[blk-1].cpl_in_use)) || + (ch > CPL_CH && (s->blocks[blk].channel_in_cpl[ch] != s->blocks[blk-1].channel_in_cpl[ch]))) { + exp_strategy[blk] = EXP_NEW; + continue; + } exp_diff = s->dsp.sad[0](NULL, exp, exp - AC3_MAX_COEFS, 16, 16); - if (exp_diff > EXP_DIFF_THRESHOLD) + exp_strategy[blk] = EXP_REUSE; + if (ch == CPL_CH && exp_diff > (EXP_DIFF_THRESHOLD * (s->blocks[blk].end_freq[ch] - s->start_freq[ch]) / AC3_MAX_COEFS)) + exp_strategy[blk] = EXP_NEW; + else if (ch > CPL_CH && exp_diff > EXP_DIFF_THRESHOLD) exp_strategy[blk] = EXP_NEW; - else - exp_strategy[blk] = EXP_REUSE; - exp += AC3_MAX_COEFS; } /* now select the encoding strategy type : if exponents are often @@ -615,25 +982,26 @@ static void compute_exp_strategy(AC3EncodeContext *s) /** * Update the exponents so that they are the ones the decoder will decode. */ -static void encode_exponents_blk_ch(uint8_t *exp, int nb_exps, int exp_strategy) +static void encode_exponents_blk_ch(uint8_t *exp, int nb_exps, int exp_strategy, + int cpl) { int nb_groups, i, k; - nb_groups = exponent_group_tab[exp_strategy-1][nb_exps] * 3; + nb_groups = exponent_group_tab[cpl][exp_strategy-1][nb_exps] * 3; /* for each group, compute the minimum exponent */ switch(exp_strategy) { case EXP_D25: - for (i = 1, k = 1; i <= nb_groups; i++) { + for (i = 1, k = 1-cpl; i <= nb_groups; i++) { uint8_t exp_min = exp[k]; if (exp[k+1] < exp_min) exp_min = exp[k+1]; - exp[i] = exp_min; + exp[i-cpl] = exp_min; k += 2; } break; case EXP_D45: - for (i = 1, k = 1; i <= nb_groups; i++) { + for (i = 1, k = 1-cpl; i <= nb_groups; i++) { uint8_t exp_min = exp[k]; if (exp[k+1] < exp_min) exp_min = exp[k+1]; @@ -641,14 +1009,14 @@ static void encode_exponents_blk_ch(uint8_t *exp, int nb_exps, int exp_strategy) exp_min = exp[k+2]; if (exp[k+3] < exp_min) exp_min = exp[k+3]; - exp[i] = exp_min; + exp[i-cpl] = exp_min; k += 4; } break; } /* constraint for DC exponent */ - if (exp[0] > 15) + if (!cpl && exp[0] > 15) exp[0] = 15; /* decrease the delta between each groups to within 2 so that they can be @@ -659,18 +1027,21 @@ static void encode_exponents_blk_ch(uint8_t *exp, int nb_exps, int exp_strategy) while (--i >= 0) exp[i] = FFMIN(exp[i], exp[i+1] + 2); + if (cpl) + exp[-1] = exp[0] & ~1; + /* now we have the exponent values the decoder will see */ switch (exp_strategy) { case EXP_D25: - for (i = nb_groups, k = nb_groups * 2; i > 0; i--) { - uint8_t exp1 = exp[i]; + for (i = nb_groups, k = (nb_groups * 2)-cpl; i > 0; i--) { + uint8_t exp1 = exp[i-cpl]; exp[k--] = exp1; exp[k--] = exp1; } break; case EXP_D45: - for (i = nb_groups, k = nb_groups * 4; i > 0; i--) { - exp[k] = exp[k-1] = exp[k-2] = exp[k-3] = exp[i]; + for (i = nb_groups, k = (nb_groups * 4)-cpl; i > 0; i--) { + exp[k] = exp[k-1] = exp[k-2] = exp[k-3] = exp[i-cpl]; k -= 4; } break; @@ -686,32 +1057,40 @@ static void encode_exponents_blk_ch(uint8_t *exp, int nb_exps, int exp_strategy) */ static void encode_exponents(AC3EncodeContext *s) { - int blk, blk1, ch; + int blk, blk1, ch, cpl; uint8_t *exp, *exp_strategy; int nb_coefs, num_reuse_blocks; - for (ch = 0; ch < s->channels; ch++) { - exp = s->blocks[0].exp[ch]; + for (ch = !s->cpl_on; ch <= s->channels; ch++) { + exp = s->blocks[0].exp[ch] + s->start_freq[ch]; exp_strategy = s->exp_strategy[ch]; - nb_coefs = s->nb_coefs[ch]; + cpl = (ch == CPL_CH); blk = 0; while (blk < AC3_MAX_BLOCKS) { + AC3Block *block = &s->blocks[blk]; + if (cpl && !block->cpl_in_use) { + exp += AC3_MAX_COEFS; + blk++; + continue; + } + nb_coefs = block->end_freq[ch] - s->start_freq[ch]; blk1 = blk + 1; /* count the number of EXP_REUSE blocks after the current block and set exponent reference block pointers */ - s->blocks[blk].exp_ref_block[ch] = &s->blocks[blk]; + block->exp_ref_block[ch] = block; while (blk1 < AC3_MAX_BLOCKS && exp_strategy[blk1] == EXP_REUSE) { - s->blocks[blk1].exp_ref_block[ch] = &s->blocks[blk]; + s->blocks[blk1].exp_ref_block[ch] = block; blk1++; } num_reuse_blocks = blk1 - blk - 1; /* for the EXP_REUSE case we select the min of the exponents */ - s->ac3dsp.ac3_exponent_min(exp, num_reuse_blocks, nb_coefs); + s->ac3dsp.ac3_exponent_min(exp-s->start_freq[ch], num_reuse_blocks, + AC3_MAX_COEFS); - encode_exponents_blk_ch(exp, nb_coefs, exp_strategy[blk]); + encode_exponents_blk_ch(exp, nb_coefs, exp_strategy[blk], cpl); exp += AC3_MAX_COEFS * (num_reuse_blocks + 1); blk = blk1; @@ -727,7 +1106,7 @@ static void encode_exponents(AC3EncodeContext *s) */ static void group_exponents(AC3EncodeContext *s) { - int blk, ch, i; + int blk, ch, i, cpl; int group_size, nb_groups, bit_count; uint8_t *p; int delta0, delta1, delta2; @@ -736,14 +1115,15 @@ static void group_exponents(AC3EncodeContext *s) bit_count = 0; for (blk = 0; blk < AC3_MAX_BLOCKS; blk++) { AC3Block *block = &s->blocks[blk]; - for (ch = 0; ch < s->channels; ch++) { + for (ch = !block->cpl_in_use; ch <= s->channels; ch++) { int exp_strategy = s->exp_strategy[ch][blk]; if (exp_strategy == EXP_REUSE) continue; + cpl = (ch == CPL_CH); group_size = exp_strategy + (exp_strategy == EXP_D45); - nb_groups = exponent_group_tab[exp_strategy-1][s->nb_coefs[ch]]; + nb_groups = exponent_group_tab[cpl][exp_strategy-1][block->end_freq[ch]-s->start_freq[ch]]; bit_count += 4 + (nb_groups * 7); - p = block->exp[ch]; + p = block->exp[ch] + s->start_freq[ch] - cpl; /* DC exponent */ exp1 = *p++; @@ -810,9 +1190,7 @@ static void count_frame_bits_fixed(AC3EncodeContext *s) /* assumptions: * no dynamic range codes - * no channel coupling * bit allocation parameters do not change between blocks - * SNR offsets do not change between blocks * no delta bit allocation * no skipped data * no auxilliary data @@ -833,11 +1211,6 @@ static void count_frame_bits_fixed(AC3EncodeContext *s) /* dynamic range */ frame_bits++; - /* coupling strategy */ - frame_bits++; - if (!blk) - frame_bits++; - /* exponent strategy */ frame_bits += 2 * s->fbw_channels; if (s->lfe_on) @@ -848,11 +1221,6 @@ static void count_frame_bits_fixed(AC3EncodeContext *s) if (!blk) frame_bits += 2 + 2 + 2 + 2 + 3; - /* snr offsets and fast gain codes */ - frame_bits++; - if (!blk) - frame_bits += 6 + s->channels * (4 + 3); - /* delta bit allocation */ frame_bits++; @@ -884,7 +1252,7 @@ static void bit_alloc_init(AC3EncodeContext *s) s->slow_gain_code = 1; s->db_per_bit_code = 3; s->floor_code = 7; - for (ch = 0; ch < s->channels; ch++) + for (ch = 0; ch <= s->channels; ch++) s->fast_gain_code[ch] = 4; /* initial snr offset */ @@ -898,6 +1266,8 @@ static void bit_alloc_init(AC3EncodeContext *s) s->bit_alloc.slow_gain = ff_ac3_slow_gain_tab[s->slow_gain_code]; s->bit_alloc.db_per_bit = ff_ac3_db_per_bit_tab[s->db_per_bit_code]; s->bit_alloc.floor = ff_ac3_floor_tab[s->floor_code]; + s->bit_alloc.cpl_fast_leak = 0; + s->bit_alloc.cpl_slow_leak = 0; count_frame_bits_fixed(s); } @@ -926,17 +1296,64 @@ static void count_frame_bits(AC3EncodeContext *s) /* audio blocks */ for (blk = 0; blk < AC3_MAX_BLOCKS; blk++) { + AC3Block *block = &s->blocks[blk]; + + /* coupling strategy */ + frame_bits++; + if (block->new_cpl_strategy) { + frame_bits++; + if (block->cpl_in_use) { + frame_bits += s->fbw_channels; + if (s->channel_mode == AC3_CHMODE_STEREO) + frame_bits++; + frame_bits += 4 + 4; + frame_bits += s->num_cpl_subbands - 1; + } + } + + /* coupling coordinates */ + if (block->cpl_in_use) { + for (ch = 1; ch <= s->fbw_channels; ch++) { + if (block->channel_in_cpl[ch]) { + frame_bits++; + if (block->new_cpl_coords) { + frame_bits += 2; + frame_bits += (4 + 4) * s->num_cpl_bands; + } + } + } + } + /* stereo rematrixing */ if (s->channel_mode == AC3_CHMODE_STEREO) { frame_bits++; if (s->blocks[blk].new_rematrixing_strategy) - frame_bits += s->num_rematrixing_bands; + frame_bits += block->num_rematrixing_bands; } /* bandwidth codes & gain range */ - for (ch = 0; ch < s->fbw_channels; ch++) { - if (s->exp_strategy[ch][blk] != EXP_REUSE) - frame_bits += 6 + 2; + for (ch = 1; ch <= s->fbw_channels; ch++) { + if (s->exp_strategy[ch][blk] != EXP_REUSE) { + if (!block->channel_in_cpl[ch]) + frame_bits += 6; + frame_bits += 2; + } + } + + /* coupling exponent strategy */ + if (block->cpl_in_use) + frame_bits += 2; + + /* snr offsets and fast gain codes */ + frame_bits++; + if (block->new_snr_offsets) + frame_bits += 6 + (s->channels + block->cpl_in_use) * (4 + 3); + + /* coupling leak info */ + if (block->cpl_in_use) { + frame_bits++; + if (block->new_cpl_leak) + frame_bits += 3 + 3; } } @@ -970,16 +1387,16 @@ static void bit_alloc_masking(AC3EncodeContext *s) for (blk = 0; blk < AC3_MAX_BLOCKS; blk++) { AC3Block *block = &s->blocks[blk]; - for (ch = 0; ch < s->channels; ch++) { + for (ch = !block->cpl_in_use; ch <= s->channels; ch++) { /* We only need psd and mask for calculating bap. Since we currently do not calculate bap when exponent strategy is EXP_REUSE we do not need to calculate psd or mask. */ if (s->exp_strategy[ch][blk] != EXP_REUSE) { - ff_ac3_bit_alloc_calc_psd(block->exp[ch], 0, - s->nb_coefs[ch], - block->psd[ch], block->band_psd[ch]); + ff_ac3_bit_alloc_calc_psd(block->exp[ch], s->start_freq[ch], + block->end_freq[ch], block->psd[ch], + block->band_psd[ch]); ff_ac3_bit_alloc_calc_mask(&s->bit_alloc, block->band_psd[ch], - 0, s->nb_coefs[ch], + s->start_freq[ch], block->end_freq[ch], ff_ac3_fast_gain_tab[s->fast_gain_code[ch]], ch == s->lfe_channel, DBA_NONE, 0, NULL, NULL, NULL, @@ -997,11 +1414,12 @@ static void bit_alloc_masking(AC3EncodeContext *s) static void reset_block_bap(AC3EncodeContext *s) { int blk, ch; + int channels = s->channels + 1; if (s->blocks[0].bap[0] == s->bap_buffer) return; for (blk = 0; blk < AC3_MAX_BLOCKS; blk++) { - for (ch = 0; ch < s->channels; ch++) { - s->blocks[blk].bap[ch] = &s->bap_buffer[AC3_MAX_COEFS * (blk * s->channels + ch)]; + for (ch = 0; ch < channels; ch++) { + s->blocks[blk].bap[ch] = &s->bap_buffer[AC3_MAX_COEFS * (blk * channels + ch)]; } } } @@ -1027,28 +1445,37 @@ static int bit_alloc(AC3EncodeContext *s, int snr_offset) for (blk = 0; blk < AC3_MAX_BLOCKS; blk++) { AC3Block *block = &s->blocks[blk]; AC3Block *ref_block; + int av_uninit(ch0); + int got_cpl = !block->cpl_in_use; // initialize grouped mantissa counts. these are set so that they are // padded to the next whole group size when bits are counted in // compute_mantissa_size_final mant_cnt[0] = mant_cnt[3] = 0; mant_cnt[1] = mant_cnt[2] = 2; mant_cnt[4] = 1; - for (ch = 0; ch < s->channels; ch++) { + for (ch = 1; ch <= s->channels; ch++) { + if (!got_cpl && ch > 1 && block->channel_in_cpl[ch-1]) { + ch0 = ch - 1; + ch = CPL_CH; + got_cpl = 1; + } + /* Currently the only bit allocation parameters which vary across blocks within a frame are the exponent values. We can take advantage of that by reusing the bit allocation pointers whenever we reuse exponents. */ ref_block = block->exp_ref_block[ch]; if (s->exp_strategy[ch][blk] != EXP_REUSE) { - s->ac3dsp.bit_alloc_calc_bap(ref_block->mask[ch], - ref_block->psd[ch], 0, - s->nb_coefs[ch], snr_offset, - s->bit_alloc.floor, ff_ac3_bap_tab, - ref_block->bap[ch]); + s->ac3dsp.bit_alloc_calc_bap(ref_block->mask[ch], ref_block->psd[ch], + s->start_freq[ch], block->end_freq[ch], + snr_offset, s->bit_alloc.floor, + ff_ac3_bap_tab, ref_block->bap[ch]); } mantissa_bits += s->ac3dsp.compute_mantissa_size(mant_cnt, - ref_block->bap[ch], - s->nb_coefs[ch]); + ref_block->bap[ch]+s->start_freq[ch], + block->end_freq[ch]-s->start_freq[ch]); + if (ch == CPL_CH) + ch = ch0; } mantissa_bits += compute_mantissa_size_final(mant_cnt); } @@ -1074,7 +1501,7 @@ static int cbr_bit_allocation(AC3EncodeContext *s) /* if previous frame SNR offset was 1023, check if current frame can also use SNR offset of 1023. if so, skip the search. */ - if ((snr_offset | s->fine_snr_offset[0]) == 1023) { + if ((snr_offset | s->fine_snr_offset[1]) == 1023) { if (bit_alloc(s, 1023) <= bits_left) return 0; } @@ -1098,7 +1525,7 @@ static int cbr_bit_allocation(AC3EncodeContext *s) reset_block_bap(s); s->coarse_snr_offset = snr_offset >> 4; - for (ch = 0; ch < s->channels; ch++) + for (ch = !s->cpl_on; ch <= s->channels; ch++) s->fine_snr_offset[ch] = snr_offset & 0xF; return 0; @@ -1116,26 +1543,26 @@ static int downgrade_exponents(AC3EncodeContext *s) { int ch, blk; - for (ch = 0; ch < s->fbw_channels; ch++) { - for (blk = AC3_MAX_BLOCKS-1; blk >= 0; blk--) { + for (blk = AC3_MAX_BLOCKS-1; blk >= 0; blk--) { + for (ch = !s->blocks[blk].cpl_in_use; ch <= s->fbw_channels; ch++) { if (s->exp_strategy[ch][blk] == EXP_D15) { s->exp_strategy[ch][blk] = EXP_D25; return 0; } } } - for (ch = 0; ch < s->fbw_channels; ch++) { - for (blk = AC3_MAX_BLOCKS-1; blk >= 0; blk--) { + for (blk = AC3_MAX_BLOCKS-1; blk >= 0; blk--) { + for (ch = !s->blocks[blk].cpl_in_use; ch <= s->fbw_channels; ch++) { if (s->exp_strategy[ch][blk] == EXP_D25) { s->exp_strategy[ch][blk] = EXP_D45; return 0; } } } - for (ch = 0; ch < s->fbw_channels; ch++) { - /* block 0 cannot reuse exponents, so only downgrade D45 to REUSE if - the block number > 0 */ - for (blk = AC3_MAX_BLOCKS-1; blk > 0; blk--) { + /* block 0 cannot reuse exponents, so only downgrade D45 to REUSE if + the block number > 0 */ + for (blk = AC3_MAX_BLOCKS-1; blk > 0; blk--) { + for (ch = !s->blocks[blk].cpl_in_use; ch <= s->fbw_channels; ch++) { if (s->exp_strategy[ch][blk] > EXP_REUSE) { s->exp_strategy[ch][blk] = EXP_REUSE; return 0; @@ -1162,7 +1589,18 @@ static int compute_bit_allocation(AC3EncodeContext *s) ret = cbr_bit_allocation(s); while (ret) { - /* fallback 1: downgrade exponents */ + /* fallback 1: disable channel coupling */ + if (s->cpl_on) { + s->cpl_on = 0; + compute_coupling_strategy(s); + compute_rematrixing_strategy(s); + apply_rematrixing(s); + process_exponents(s); + ret = compute_bit_allocation(s); + continue; + } + + /* fallback 2: downgrade exponents */ if (!downgrade_exponents(s)) { extract_exponents(s); encode_exponents(s); @@ -1216,12 +1654,13 @@ static inline int asym_quant(int c, int e, int qbits) * Quantize a set of mantissas for a single channel in a single block. */ static void quantize_mantissas_blk_ch(AC3Mant *s, int32_t *fixed_coef, - uint8_t *exp, - uint8_t *bap, uint16_t *qmant, int n) + uint8_t *exp, uint8_t *bap, + uint16_t *qmant, int start_freq, + int end_freq) { int i; - for (i = 0; i < n; i++) { + for (i = start_freq; i < end_freq; i++) { int v; int c = fixed_coef[i]; int e = exp[i]; @@ -1311,19 +1750,27 @@ static void quantize_mantissas_blk_ch(AC3Mant *s, int32_t *fixed_coef, */ static void quantize_mantissas(AC3EncodeContext *s) { - int blk, ch; - + int blk, ch, ch0=0, got_cpl; for (blk = 0; blk < AC3_MAX_BLOCKS; blk++) { AC3Block *block = &s->blocks[blk]; AC3Block *ref_block; AC3Mant m = { 0 }; - for (ch = 0; ch < s->channels; ch++) { + got_cpl = !block->cpl_in_use; + for (ch = 1; ch <= s->channels; ch++) { + if (!got_cpl && ch > 1 && block->channel_in_cpl[ch-1]) { + ch0 = ch - 1; + ch = CPL_CH; + got_cpl = 1; + } ref_block = block->exp_ref_block[ch]; quantize_mantissas_blk_ch(&m, block->fixed_coef[ch], - ref_block->exp[ch], ref_block->bap[ch], - block->qmant[ch], s->nb_coefs[ch]); + ref_block->exp[ch], + ref_block->bap[ch], block->qmant[ch], + s->start_freq[ch], block->end_freq[ch]); + if (ch == CPL_CH) + ch = ch0; } } } @@ -1390,7 +1837,8 @@ static void output_frame_header(AC3EncodeContext *s) */ static void output_audio_block(AC3EncodeContext *s, int blk) { - int ch, i, baie, rbnd; + int ch, i, baie, bnd, got_cpl; + int av_uninit(ch0); AC3Block *block = &s->blocks[blk]; /* block switching */ @@ -1405,11 +1853,38 @@ static void output_audio_block(AC3EncodeContext *s, int blk) put_bits(&s->pb, 1, 0); /* channel coupling */ - if (!blk) { - put_bits(&s->pb, 1, 1); /* coupling strategy present */ - put_bits(&s->pb, 1, 0); /* no coupling strategy */ - } else { - put_bits(&s->pb, 1, 0); /* no new coupling strategy */ + put_bits(&s->pb, 1, block->new_cpl_strategy); + if (block->new_cpl_strategy) { + put_bits(&s->pb, 1, block->cpl_in_use); + if (block->cpl_in_use) { + int start_sub, end_sub; + for (ch = 1; ch <= s->fbw_channels; ch++) + put_bits(&s->pb, 1, block->channel_in_cpl[ch]); + if (s->channel_mode == AC3_CHMODE_STEREO) + put_bits(&s->pb, 1, 0); /* phase flags in use */ + start_sub = (s->start_freq[CPL_CH] - 37) / 12; + end_sub = (s->cpl_end_freq - 37) / 12; + put_bits(&s->pb, 4, start_sub); + put_bits(&s->pb, 4, end_sub - 3); + for (bnd = start_sub+1; bnd < end_sub; bnd++) + put_bits(&s->pb, 1, ff_eac3_default_cpl_band_struct[bnd]); + } + } + + /* coupling coordinates */ + if (block->cpl_in_use) { + for (ch = 1; ch <= s->fbw_channels; ch++) { + if (block->channel_in_cpl[ch]) { + put_bits(&s->pb, 1, block->new_cpl_coords); + if (block->new_cpl_coords) { + put_bits(&s->pb, 2, block->cpl_master_exp[ch]); + for (bnd = 0; bnd < s->num_cpl_bands; bnd++) { + put_bits(&s->pb, 4, block->cpl_coord_exp [ch][bnd]); + put_bits(&s->pb, 4, block->cpl_coord_mant[ch][bnd]); + } + } + } + } } /* stereo rematrixing */ @@ -1417,40 +1892,41 @@ static void output_audio_block(AC3EncodeContext *s, int blk) put_bits(&s->pb, 1, block->new_rematrixing_strategy); if (block->new_rematrixing_strategy) { /* rematrixing flags */ - for (rbnd = 0; rbnd < s->num_rematrixing_bands; rbnd++) - put_bits(&s->pb, 1, block->rematrixing_flags[rbnd]); + for (bnd = 0; bnd < block->num_rematrixing_bands; bnd++) + put_bits(&s->pb, 1, block->rematrixing_flags[bnd]); } } /* exponent strategy */ - for (ch = 0; ch < s->fbw_channels; ch++) + for (ch = !block->cpl_in_use; ch <= s->fbw_channels; ch++) put_bits(&s->pb, 2, s->exp_strategy[ch][blk]); if (s->lfe_on) put_bits(&s->pb, 1, s->exp_strategy[s->lfe_channel][blk]); /* bandwidth */ - for (ch = 0; ch < s->fbw_channels; ch++) { - if (s->exp_strategy[ch][blk] != EXP_REUSE) + for (ch = 1; ch <= s->fbw_channels; ch++) { + if (s->exp_strategy[ch][blk] != EXP_REUSE && !block->channel_in_cpl[ch]) put_bits(&s->pb, 6, s->bandwidth_code); } /* exponents */ - for (ch = 0; ch < s->channels; ch++) { + for (ch = !block->cpl_in_use; ch <= s->channels; ch++) { int nb_groups; + int cpl = (ch == CPL_CH); if (s->exp_strategy[ch][blk] == EXP_REUSE) continue; /* DC exponent */ - put_bits(&s->pb, 4, block->grouped_exp[ch][0]); + put_bits(&s->pb, 4, block->grouped_exp[ch][0] >> cpl); /* exponent groups */ - nb_groups = exponent_group_tab[s->exp_strategy[ch][blk]-1][s->nb_coefs[ch]]; + nb_groups = exponent_group_tab[cpl][s->exp_strategy[ch][blk]-1][block->end_freq[ch]-s->start_freq[ch]]; for (i = 1; i <= nb_groups; i++) put_bits(&s->pb, 7, block->grouped_exp[ch][i]); /* gain range info */ - if (ch != s->lfe_channel) + if (ch != s->lfe_channel && !cpl) put_bits(&s->pb, 2, 0); } @@ -1466,23 +1942,40 @@ static void output_audio_block(AC3EncodeContext *s, int blk) } /* snr offset */ - put_bits(&s->pb, 1, baie); - if (baie) { + put_bits(&s->pb, 1, block->new_snr_offsets); + if (block->new_snr_offsets) { put_bits(&s->pb, 6, s->coarse_snr_offset); - for (ch = 0; ch < s->channels; ch++) { + for (ch = !block->cpl_in_use; ch <= s->channels; ch++) { put_bits(&s->pb, 4, s->fine_snr_offset[ch]); put_bits(&s->pb, 3, s->fast_gain_code[ch]); } } + /* coupling leak */ + if (block->cpl_in_use) { + put_bits(&s->pb, 1, block->new_cpl_leak); + if (block->new_cpl_leak) { + put_bits(&s->pb, 3, s->bit_alloc.cpl_fast_leak); + put_bits(&s->pb, 3, s->bit_alloc.cpl_slow_leak); + } + } + put_bits(&s->pb, 1, 0); /* no delta bit allocation */ put_bits(&s->pb, 1, 0); /* no data to skip */ /* mantissas */ - for (ch = 0; ch < s->channels; ch++) { + got_cpl = !block->cpl_in_use; + for (ch = 1; ch <= s->channels; ch++) { int b, q; - AC3Block *ref_block = block->exp_ref_block[ch]; - for (i = 0; i < s->nb_coefs[ch]; i++) { + AC3Block *ref_block; + + if (!got_cpl && ch > 1 && block->channel_in_cpl[ch-1]) { + ch0 = ch - 1; + ch = CPL_CH; + got_cpl = 1; + } + ref_block = block->exp_ref_block[ch]; + for (i = s->start_freq[ch]; i < block->end_freq[ch]; i++) { q = block->qmant[ch][i]; b = ref_block->bap[ch][i]; switch (b) { @@ -1496,6 +1989,8 @@ static void output_audio_block(AC3EncodeContext *s, int blk) default: put_bits(&s->pb, b-1, q); break; } } + if (ch == CPL_CH) + ch = ch0; } } @@ -1881,6 +2376,12 @@ static int ac3_encode_frame(AVCodecContext *avctx, unsigned char *frame, scale_coefficients(s); + s->cpl_on = s->cpl_enabled; + compute_coupling_strategy(s); + + if (s->cpl_on) + apply_channel_coupling(s); + compute_rematrixing_strategy(s); apply_rematrixing(s); @@ -1961,7 +2462,7 @@ static av_cold int set_channel_info(AC3EncodeContext *s, int channels, s->lfe_on = !!(ch_layout & AV_CH_LOW_FREQUENCY); s->channels = channels; s->fbw_channels = channels - s->lfe_on; - s->lfe_channel = s->lfe_on ? s->fbw_channels : -1; + s->lfe_channel = s->lfe_on ? s->fbw_channels + 1 : -1; if (s->lfe_on) ch_layout -= AV_CH_LOW_FREQUENCY; @@ -2060,6 +2561,10 @@ static av_cold int validate_options(AVCodecContext *avctx, AC3EncodeContext *s) s->rematrixing_enabled = s->options.stereo_rematrixing && (s->channel_mode == AC3_CHMODE_STEREO); + s->cpl_enabled = s->options.channel_coupling && + s->channel_mode >= AC3_CHMODE_STEREO && + CONFIG_AC3ENC_FLOAT; + return 0; } @@ -2071,7 +2576,8 @@ static av_cold int validate_options(AVCodecContext *avctx, AC3EncodeContext *s) */ static av_cold void set_bandwidth(AC3EncodeContext *s) { - int ch; + int blk, ch; + int av_uninit(cpl_start); if (s->cutoff) { /* calculate bandwidth based on user-specified cutoff frequency */ @@ -2084,11 +2590,54 @@ static av_cold void set_bandwidth(AC3EncodeContext *s) } /* set number of coefficients for each channel */ - for (ch = 0; ch < s->fbw_channels; ch++) { - s->nb_coefs[ch] = s->bandwidth_code * 3 + 73; + for (ch = 1; ch <= s->fbw_channels; ch++) { + s->start_freq[ch] = 0; + for (blk = 0; blk < AC3_MAX_BLOCKS; blk++) + s->blocks[blk].end_freq[ch] = s->bandwidth_code * 3 + 73; + } + /* LFE channel always has 7 coefs */ + if (s->lfe_on) { + s->start_freq[s->lfe_channel] = 0; + for (blk = 0; blk < AC3_MAX_BLOCKS; blk++) + s->blocks[blk].end_freq[ch] = 7; + } + + /* initialize coupling strategy */ + if (s->cpl_enabled) { + if (s->options.cpl_start >= 0) { + cpl_start = s->options.cpl_start; + } else { + cpl_start = ac3_coupling_start_tab[s->channel_mode-2][s->bit_alloc.sr_code][s->frame_size_code/2]; + if (cpl_start < 0) + s->cpl_enabled = 0; + } + } + if (s->cpl_enabled) { + int i, cpl_start_band, cpl_end_band; + uint8_t *cpl_band_sizes = s->cpl_band_sizes; + + cpl_end_band = s->bandwidth_code / 4 + 3; + cpl_start_band = av_clip(cpl_start, 0, FFMIN(cpl_end_band-1, 15)); + + s->num_cpl_subbands = cpl_end_band - cpl_start_band; + + s->num_cpl_bands = 1; + *cpl_band_sizes = 12; + for (i = cpl_start_band + 1; i < cpl_end_band; i++) { + if (ff_eac3_default_cpl_band_struct[i]) { + *cpl_band_sizes += 12; + } else { + s->num_cpl_bands++; + cpl_band_sizes++; + *cpl_band_sizes = 12; + } + } + + s->start_freq[CPL_CH] = cpl_start_band * 12 + 37; + s->cpl_end_freq = cpl_end_band * 12 + 37; + for (blk = 0; blk < AC3_MAX_BLOCKS; blk++) + s->blocks[blk].end_freq[CPL_CH] = s->cpl_end_freq; } - if (s->lfe_on) - s->nb_coefs[s->lfe_channel] = 7; /* LFE channel always has 7 coefs */ } @@ -2096,6 +2645,7 @@ static av_cold int allocate_buffers(AVCodecContext *avctx) { int blk, ch; AC3EncodeContext *s = avctx->priv_data; + int channels = s->channels + 1; /* includes coupling channel */ FF_ALLOC_OR_GOTO(avctx, s->planar_samples, s->channels * sizeof(*s->planar_samples), alloc_fail); @@ -2104,74 +2654,90 @@ static av_cold int allocate_buffers(AVCodecContext *avctx) (AC3_FRAME_SIZE+AC3_BLOCK_SIZE) * sizeof(**s->planar_samples), alloc_fail); } - FF_ALLOC_OR_GOTO(avctx, s->bap_buffer, AC3_MAX_BLOCKS * s->channels * + FF_ALLOC_OR_GOTO(avctx, s->bap_buffer, AC3_MAX_BLOCKS * channels * AC3_MAX_COEFS * sizeof(*s->bap_buffer), alloc_fail); - FF_ALLOC_OR_GOTO(avctx, s->bap1_buffer, AC3_MAX_BLOCKS * s->channels * + FF_ALLOC_OR_GOTO(avctx, s->bap1_buffer, AC3_MAX_BLOCKS * channels * AC3_MAX_COEFS * sizeof(*s->bap1_buffer), alloc_fail); - FF_ALLOC_OR_GOTO(avctx, s->mdct_coef_buffer, AC3_MAX_BLOCKS * s->channels * + FF_ALLOC_OR_GOTO(avctx, s->mdct_coef_buffer, AC3_MAX_BLOCKS * channels * AC3_MAX_COEFS * sizeof(*s->mdct_coef_buffer), alloc_fail); - FF_ALLOC_OR_GOTO(avctx, s->exp_buffer, AC3_MAX_BLOCKS * s->channels * + FF_ALLOC_OR_GOTO(avctx, s->exp_buffer, AC3_MAX_BLOCKS * channels * AC3_MAX_COEFS * sizeof(*s->exp_buffer), alloc_fail); - FF_ALLOC_OR_GOTO(avctx, s->grouped_exp_buffer, AC3_MAX_BLOCKS * s->channels * + FF_ALLOC_OR_GOTO(avctx, s->grouped_exp_buffer, AC3_MAX_BLOCKS * channels * 128 * sizeof(*s->grouped_exp_buffer), alloc_fail); - FF_ALLOC_OR_GOTO(avctx, s->psd_buffer, AC3_MAX_BLOCKS * s->channels * + FF_ALLOC_OR_GOTO(avctx, s->psd_buffer, AC3_MAX_BLOCKS * channels * AC3_MAX_COEFS * sizeof(*s->psd_buffer), alloc_fail); - FF_ALLOC_OR_GOTO(avctx, s->band_psd_buffer, AC3_MAX_BLOCKS * s->channels * + FF_ALLOC_OR_GOTO(avctx, s->band_psd_buffer, AC3_MAX_BLOCKS * channels * 64 * sizeof(*s->band_psd_buffer), alloc_fail); - FF_ALLOC_OR_GOTO(avctx, s->mask_buffer, AC3_MAX_BLOCKS * s->channels * + FF_ALLOC_OR_GOTO(avctx, s->mask_buffer, AC3_MAX_BLOCKS * channels * 64 * sizeof(*s->mask_buffer), alloc_fail); - FF_ALLOC_OR_GOTO(avctx, s->qmant_buffer, AC3_MAX_BLOCKS * s->channels * + FF_ALLOC_OR_GOTO(avctx, s->qmant_buffer, AC3_MAX_BLOCKS * channels * AC3_MAX_COEFS * sizeof(*s->qmant_buffer), alloc_fail); + if (s->cpl_enabled) { + FF_ALLOC_OR_GOTO(avctx, s->cpl_coord_exp_buffer, AC3_MAX_BLOCKS * channels * + 16 * sizeof(*s->cpl_coord_exp_buffer), alloc_fail); + FF_ALLOC_OR_GOTO(avctx, s->cpl_coord_mant_buffer, AC3_MAX_BLOCKS * channels * + 16 * sizeof(*s->cpl_coord_mant_buffer), alloc_fail); + } for (blk = 0; blk < AC3_MAX_BLOCKS; blk++) { AC3Block *block = &s->blocks[blk]; - FF_ALLOC_OR_GOTO(avctx, block->bap, s->channels * sizeof(*block->bap), + FF_ALLOC_OR_GOTO(avctx, block->bap, channels * sizeof(*block->bap), alloc_fail); - FF_ALLOCZ_OR_GOTO(avctx, block->mdct_coef, s->channels * sizeof(*block->mdct_coef), + FF_ALLOCZ_OR_GOTO(avctx, block->mdct_coef, channels * sizeof(*block->mdct_coef), alloc_fail); - FF_ALLOCZ_OR_GOTO(avctx, block->exp, s->channels * sizeof(*block->exp), + FF_ALLOCZ_OR_GOTO(avctx, block->exp, channels * sizeof(*block->exp), alloc_fail); - FF_ALLOCZ_OR_GOTO(avctx, block->grouped_exp, s->channels * sizeof(*block->grouped_exp), + FF_ALLOCZ_OR_GOTO(avctx, block->grouped_exp, channels * sizeof(*block->grouped_exp), alloc_fail); - FF_ALLOCZ_OR_GOTO(avctx, block->psd, s->channels * sizeof(*block->psd), + FF_ALLOCZ_OR_GOTO(avctx, block->psd, channels * sizeof(*block->psd), alloc_fail); - FF_ALLOCZ_OR_GOTO(avctx, block->band_psd, s->channels * sizeof(*block->band_psd), + FF_ALLOCZ_OR_GOTO(avctx, block->band_psd, channels * sizeof(*block->band_psd), alloc_fail); - FF_ALLOCZ_OR_GOTO(avctx, block->mask, s->channels * sizeof(*block->mask), + FF_ALLOCZ_OR_GOTO(avctx, block->mask, channels * sizeof(*block->mask), alloc_fail); - FF_ALLOCZ_OR_GOTO(avctx, block->qmant, s->channels * sizeof(*block->qmant), + FF_ALLOCZ_OR_GOTO(avctx, block->qmant, channels * sizeof(*block->qmant), alloc_fail); + if (s->cpl_enabled) { + FF_ALLOCZ_OR_GOTO(avctx, block->cpl_coord_exp, channels * sizeof(*block->cpl_coord_exp), + alloc_fail); + FF_ALLOCZ_OR_GOTO(avctx, block->cpl_coord_mant, channels * sizeof(*block->cpl_coord_mant), + alloc_fail); + } - for (ch = 0; ch < s->channels; ch++) { + for (ch = 0; ch < channels; ch++) { /* arrangement: block, channel, coeff */ - block->bap[ch] = &s->bap_buffer [AC3_MAX_COEFS * (blk * s->channels + ch)]; - block->mdct_coef[ch] = &s->mdct_coef_buffer [AC3_MAX_COEFS * (blk * s->channels + ch)]; - block->grouped_exp[ch] = &s->grouped_exp_buffer[128 * (blk * s->channels + ch)]; - block->psd[ch] = &s->psd_buffer [AC3_MAX_COEFS * (blk * s->channels + ch)]; - block->band_psd[ch] = &s->band_psd_buffer [64 * (blk * s->channels + ch)]; - block->mask[ch] = &s->mask_buffer [64 * (blk * s->channels + ch)]; - block->qmant[ch] = &s->qmant_buffer [AC3_MAX_COEFS * (blk * s->channels + ch)]; + block->bap[ch] = &s->bap_buffer [AC3_MAX_COEFS * (blk * channels + ch)]; + block->grouped_exp[ch] = &s->grouped_exp_buffer[128 * (blk * channels + ch)]; + block->psd[ch] = &s->psd_buffer [AC3_MAX_COEFS * (blk * channels + ch)]; + block->band_psd[ch] = &s->band_psd_buffer [64 * (blk * channels + ch)]; + block->mask[ch] = &s->mask_buffer [64 * (blk * channels + ch)]; + block->qmant[ch] = &s->qmant_buffer [AC3_MAX_COEFS * (blk * channels + ch)]; + if (s->cpl_enabled) { + block->cpl_coord_exp[ch] = &s->cpl_coord_exp_buffer [16 * (blk * channels + ch)]; + block->cpl_coord_mant[ch] = &s->cpl_coord_mant_buffer[16 * (blk * channels + ch)]; + } /* arrangement: channel, block, coeff */ block->exp[ch] = &s->exp_buffer [AC3_MAX_COEFS * (AC3_MAX_BLOCKS * ch + blk)]; + block->mdct_coef[ch] = &s->mdct_coef_buffer [AC3_MAX_COEFS * (AC3_MAX_BLOCKS * ch + blk)]; } } if (CONFIG_AC3ENC_FLOAT) { - FF_ALLOC_OR_GOTO(avctx, s->fixed_coef_buffer, AC3_MAX_BLOCKS * s->channels * + FF_ALLOC_OR_GOTO(avctx, s->fixed_coef_buffer, AC3_MAX_BLOCKS * channels * AC3_MAX_COEFS * sizeof(*s->fixed_coef_buffer), alloc_fail); for (blk = 0; blk < AC3_MAX_BLOCKS; blk++) { AC3Block *block = &s->blocks[blk]; - FF_ALLOCZ_OR_GOTO(avctx, block->fixed_coef, s->channels * + FF_ALLOCZ_OR_GOTO(avctx, block->fixed_coef, channels * sizeof(*block->fixed_coef), alloc_fail); - for (ch = 0; ch < s->channels; ch++) - block->fixed_coef[ch] = &s->fixed_coef_buffer[AC3_MAX_COEFS * (blk * s->channels + ch)]; + for (ch = 0; ch < channels; ch++) + block->fixed_coef[ch] = &s->fixed_coef_buffer[AC3_MAX_COEFS * (AC3_MAX_BLOCKS * ch + blk)]; } } else { for (blk = 0; blk < AC3_MAX_BLOCKS; blk++) { AC3Block *block = &s->blocks[blk]; - FF_ALLOCZ_OR_GOTO(avctx, block->fixed_coef, s->channels * + FF_ALLOCZ_OR_GOTO(avctx, block->fixed_coef, channels * sizeof(*block->fixed_coef), alloc_fail); - for (ch = 0; ch < s->channels; ch++) + for (ch = 0; ch < channels; ch++) block->fixed_coef[ch] = (int32_t *)block->mdct_coef[ch]; } } diff --git a/libavcodec/ac3enc_fixed.c b/libavcodec/ac3enc_fixed.c index 800ef8f92c..035ebb3de9 100644 --- a/libavcodec/ac3enc_fixed.c +++ b/libavcodec/ac3enc_fixed.c @@ -101,7 +101,7 @@ static void scale_coefficients(AC3EncodeContext *s) for (blk = 0; blk < AC3_MAX_BLOCKS; blk++) { AC3Block *block = &s->blocks[blk]; - for (ch = 0; ch < s->channels; ch++) { + for (ch = 1; ch <= s->channels; ch++) { s->ac3dsp.ac3_rshift_int32(block->mdct_coef[ch], AC3_MAX_COEFS, block->coeff_shift[ch]); } diff --git a/libavcodec/ac3enc_float.c b/libavcodec/ac3enc_float.c index d2435dee15..4f61440b52 100644 --- a/libavcodec/ac3enc_float.c +++ b/libavcodec/ac3enc_float.c @@ -93,8 +93,10 @@ static int normalize_samples(AC3EncodeContext *s) */ static void scale_coefficients(AC3EncodeContext *s) { - s->ac3dsp.float_to_fixed24(s->fixed_coef_buffer, s->mdct_coef_buffer, - AC3_MAX_COEFS * AC3_MAX_BLOCKS * s->channels); + int chan_size = AC3_MAX_COEFS * AC3_MAX_BLOCKS; + s->ac3dsp.float_to_fixed24(s->fixed_coef_buffer + chan_size, + s->mdct_coef_buffer + chan_size, + chan_size * s->channels); } diff --git a/libavcodec/ac3tab.c b/libavcodec/ac3tab.c index 6a4d8cd0a2..7df3d828fb 100644 --- a/libavcodec/ac3tab.c +++ b/libavcodec/ac3tab.c @@ -138,6 +138,13 @@ const uint16_t ff_ac3_bitrate_tab[19] = { */ const uint8_t ff_ac3_rematrix_band_tab[5] = { 13, 25, 37, 61, 253 }; +/** + * Table E2.16 Default Coupling Banding Structure + */ +const uint8_t ff_eac3_default_cpl_band_struct[18] = { + 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 1, 0, 1, 1, 1, 1, 1 +}; + /* AC-3 MDCT window */ /* MDCT window */ diff --git a/libavcodec/ac3tab.h b/libavcodec/ac3tab.h index 292ce0d32f..e5cd368bb7 100644 --- a/libavcodec/ac3tab.h +++ b/libavcodec/ac3tab.h @@ -39,6 +39,7 @@ extern const uint8_t ff_ac3_dec_channel_map[8][2][6]; extern const uint16_t ff_ac3_sample_rate_tab[3]; extern const uint16_t ff_ac3_bitrate_tab[19]; extern const uint8_t ff_ac3_rematrix_band_tab[5]; +extern const uint8_t ff_eac3_default_cpl_band_struct[18]; extern const int16_t ff_ac3_window[AC3_WINDOW_SIZE/2]; extern const uint8_t ff_ac3_log_add_tab[260]; extern const uint16_t ff_ac3_hearing_threshold_tab[AC3_CRITICAL_BANDS][3]; |